Analysis of Diamond-Patterned Origami Tubes Under Axial Crushing Forces
-
摘要: 为了降低薄壁管状结构受轴向冲击时的初始峰值载荷,将diamond刚性折纸模型引入到薄壁管状结构的设计中.利用有限元分析方法,以方形截面为例,分析了diamond折纸管状结构的轴向冲击性能.结果表明:相比于传统方形薄壁管,diamond折纸管状结构具有较低的初始峰值载荷和更加平稳的变形过程.得出了diamond折纸管状结构按折纸预折形式变形的临界条件.分析了diamond折纸管状结构在轴向冲击载荷作用下,底角对初始峰值载荷和平均冲击载荷的影响.
-
关键词:
- diamond折纸模型 /
- 折纸管状结构 /
- 轴向冲击 /
- 有限元分析
Abstract: The diamond pattern was introduced into thin-wall tubes to reduce the initial peak forces during axial crushing processes. The finite element method was used to analyze the performance of diamond-patterned origami tubes with square cross sections. The results show that the diamond-patterned origami tubes have lower initial peak forces but more steady crushing processes, in comparison with the corresponding straight-wall tubes. The critical conditions were obtained for the origami tubes with buckling modes agreeing with the diamond pattern creases. The relationships between the sector angle of the origami tube and the initial peak force as well as the mean crushing force under axial impact were also studied.-
Key words:
- diamond pattern /
- origami tube /
- axial crushing /
- finite element analysis
-
[1] 谭丽辉. 参数化薄壁构件模型的耐撞性分析与优化设计[D]. 博士学位论文. 长春: 吉林大学, 2014: 31-53.(TAN Li-hui. Crashworthiness analysis and optimization design parameterized model of thin-walled compoments[D]. PhD Thesis. Changchun: Jilin University, 2014: 31-53.(in Chinese)) [2] Lu G, Yu T X. Energy Absorption of Structures and Materials [M]. Holland: Elsevier, 2003: 88-113. [3] Karagiozova D, Jones N. On the mechanics of the global bending collapse of circular tubes under dynamic axial load—dynamic buckling transition[J]. International Journal of Impact Engineering,2008,35(5): 397-424. [4] Sun J. Optimization using sequential approach for triangular tube structure in crashworthiness[D]. PhD Thesis. Lubbock: Texas Tech University, 2005: 33-68. [5] Andrews K R F, England G L, Ghani E. Classification of the axial collapse of cylindrical tubes under quasi-static loading[J]. International Journal of Mechanical Sciences,1983,25(9/10): 687-696. [6] Guillow S R, Lu G, Grzebieta R H. Quasi-static axial compression of thin-walled circular aluminium tubes[J]. International Journal of Mechanical Sciences,2001,43(9): 2103-2123. [7] Abramowicz W, Jones N. Dynamic axial crushing of square tubes[J]. International Journal of Impact Engineering,1984,2(2): 179-208. [8] Abramowicz W, Jones N. Dynamic progressive buckling of circular and square tubes[J]. International Journal of Impact Engineering,1986,4(4): 243-270. [9] Ma J, You Z. Energy absorption of thin-walled square tubes with a prefolded origami pattern—part I: geometry and numerical simulation[J]. Journal of Applied Mechanics,2014,81(1): 011003. [10] Song J, Chen Y, Lu G. Axial crushing of thin-walled structures with origami patterns[J]. Thin-Walled Structures,2012,54: 65-71. [11] Hou D, Chen Y, Ma J, et al. Axial crushing of thin-walled tubes with kite-shape pattern[C]//ASME 〖STBX〗2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference . American Society of Mechanical Engineers, 2015: V05BT08A037-V05BT08A037. [12] Ma J, Hou D, Chen Y, et al. Quasi-static axial crushing of thin-walled tubes with a kite-shape rigid origami pattern: numerical simulation[J]. Thin-Walled Structures,2016,100: 38-47. [13] ABAQUS analysis user’s manual[Z]. USA: Dassault Systems Simulia Corp. Providence, RI, 2007. [14] Nagel G M, Thambiratnam D P. A numerical study on the impact response and energy absorption of tapered thin-walled tubes[J]. International Journal of Mechanical Sciences,2004,46(2): 201-216. [15] Abramowicz W, Jones N. Dynamic axial crushing of circular tubes[J]. International Journal of Impact Engineering,1984,2(3): 263-281. [16] Wu W. Rigid origami: modelling, application in pre-folded cylinders and manufacturing[D]. PhD Thesis. Oxford: Oxford University, 2010: 116-150.
点击查看大图
计量
- 文章访问数: 1341
- HTML全文浏览量: 164
- PDF下载量: 930
- 被引次数: 0