Topology Review and Convective Heat Transfer Comparison of 3D Lattice Structures

DING Yi; WU Weitao; FENG Feng; LI Shulei; YAN Hongbin

doi:10.21656/1000-0887.450184

Volume 45 Issue 8

Aug. 2024

Turn off MathJax

Article Contents

Article Navigation > Applied Mathematics and Mechanics > 2024 > 45(8): 1001-1023

DING Yi, WU Weitao, FENG Feng, LI Shulei, YAN Hongbin. Topology Review and Convective Heat Transfer Comparison of 3D Lattice Structures[J]. Applied Mathematics and Mechanics, 2024, 45(8): 1001-1023. doi: 10.21656/1000-0887.450184

Citation:

PDF( 22838 KB)

Topology Review and Convective Heat Transfer Comparison of 3D Lattice Structures

doi: 10.21656/1000-0887.450184

DING Yi^1
,,
WU Weitao¹,
FENG Feng¹,
LI Shulei²,
YAN Hongbin^{1
,
,}

1.
Key Laboratory of Special Engine Technology, Ministry of Education, School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, P.R.China
2.
School of Marine Science and Technology, Northwestern Polytechnical University, Xi'an 710072, P.R.China

Received Date: 2024-06-21
Rev Recd Date: 2024-07-12
Publish Date: 2024-08-01

Abstract

Abstract

The topologies of 3D lattice structures were reviewed and their overall heat transfer and heat dissipation performances compared, under the fixed mass flow rate, pressure drop and pumping power conditions, respectively. In total 12 lattice structures, with 6 different materials and in 2 orientations, were compared. The conjugate heat transfer in the lattice structures was solved with validated numerical models. Numerical results indicate that, the lattice topology, the lattice material and the operating conditions significantly affect the heat transfer and cooling performances. The optimal lattice differs under different comparison conditions. Under the fixed mass flow rate condition, the shifted X-lattice in orientation A and the octet lattice in orientation A exhibit the best heat transfer performance; the shifted X-lattice in orientation A also has the best cooling performance. Under the fixed pressure drop condition, the shifted X-lattices in both orientations A and B exhibit the best heat transfer performance; while the cubic lattice in orientation B and the shifted X-lattice in orientation B show the best cooling performance. Under the fixed pumping power condition, the shifted X-lattice in orientation A and the rectangular pyramid lattice in orientation B exhibit the best heat transfer performance; the shifted X-lattice in orientation B and the rectangular pyramid lattice in orientation B show the best cooling performance. The heat transfer and cooling performance database under a given lattice porosity and A characteristic length was presented as the benchmark for performance comparison of newly developed lattice structures. In addition, the database can benefit various engineering designs in selecting the appropriate lattice structures.
- periodic cellular material,
- convective heat transfer,
- pressure drop,
- performance comparison

FullText(HTML)

References(38)

References

[1]	李勇. 超临界碳氢燃料流动传热特性及其强化机理研究[D]. 西安: 西北工业大学, 2021. LI Yong. Study on heat transfer characteristics and strengthening mechanism of supercritical hydrocarbon fuel[D]. Xi'an: Northwestern Polytechnical University, 2021. (in Chinese)
[2]	张凯, 吴引江, 刘高建, 等. 高孔隙率金属多孔材料的制备技术与应用[J]. 中国材料进展, 2023, 42(10): 814-825. ZHANG Kai, WU Yingjiang, LIU Gaojian, et al. Preparation technology and application of metal porous materials with high porosity[J]. Materials China, 2023, 42(10): 814-825. (in Chinese)
[3]	YAN H B, WU W T, ZHAO Z Y, et al. Review and comparison of turbulent convective heat transfer in state-of-the-art 3D truss periodic cellular structures[J]. Applied Thermal Engineering, 2023, 235: 121450. doi: 10.1016/j.applthermaleng.2023.121450
[4]	张永存. 多孔材料传热特性分析与散热结构优化设计[D]. 大连: 大连理工大学, 2008. ZHANG Yongcun. Heat transfer characteristic analysis and heat dissipation structure optimization design of porous materials[D]. Dalian: Dalian University of Technology, 2008. (in Chinese)
[5]	严景好, 李杰, 李一鸣, 等. 基于梯度孔隙率金属泡沫的复合相变单元储热性能数值模拟[J]. 储能科学与技术, 2023, 12(8): 2424-2434. YAN Jinghao, LI Jie, LI Yiming, et al. Numerical simulation of thermal storage performance of composite phase change cell based on gradient porosity metal foam[J]. Energy Storage Science and Technology, 2023, 12(8): 2424-2434. (in Chinese)
[6]	何树, 娄钦. 多孔介质孔隙率对池沸腾传热性能影响机理的模拟研究[J]. 应用数学和力学, 2024, 45(3): 348-364. doi: 10.21656/1000-0887.440212 HE Shu, LOU Qin. Simulation study of porosity effects of porous media on pool boiling heat transfer performances[J]. Applied Mathematics and Mechanics, 2024, 45(3): 348-364. (in Chinese) doi: 10.21656/1000-0887.440212
[7]	卢天健, 何德坪, 陈常青, 等. 超轻多孔金属材料的多功能特性及应用[J]. 力学进展, 2006, 36(4): 517-535. doi: 10.3321/j.issn:1000-0992.2006.04.004 LU Tianjian, HE Deping, CHEN Changqing, et al. The multi-functionality of ultra-light porous metals and their applications[J]. Adcances in Mechanics, 2006, 36(4): 517-535. (in Chinese) doi: 10.3321/j.issn:1000-0992.2006.04.004
[8]	MEKKI B S, LANGER J, LYNCH S. Genetic algorithm based topology optimization of heat exchanger fins used in aerospace applications[J]. International Journal of Heat and Mass Transfer, 2021, 170: 121002. doi: 10.1016/j.ijheatmasstransfer.2021.121002
[9]	FENG S S, LI M Z, JOO J H, et al. Thermomechanical properties of brazed wire-woven bulk Kagome cellular metals for multifunctional applications[J]. Journal of Thermophysics and Heat Transfer, 2012, 26(1): 66-74. doi: 10.2514/1.49434
[10]	FERRARI L, BARBATO M, ESSER B, et al. Sandwich structured ceramic matrix composites with periodic cellular ceramic cores: an active cooled thermal protection for space vehicles[J]. Composite Structures, 2016, 154: 61-68. doi: 10.1016/j.compstruct.2016.07.043
[11]	LUO S B, XU D Q, SONG J W, et al. A review of regenerative cooling technologies for scramjets[J]. Applied Thermal Engineering, 2021, 190: 116754. doi: 10.1016/j.applthermaleng.2021.116754
[12]	KAUR I, AIDER Y, NITHYANANDAM K, et al. Thermal-hydraulic performance of additively manufactured lattices for gas turbine blade trailing edge cooling[J]. Applied Thermal Engineering, 2022, 211: 118461. doi: 10.1016/j.applthermaleng.2022.118461
[13]	YAN H B, MEW T, LEE M G, et al. Thermofluidic characteristics of a porous ventilated brake disk[J]. Journal of Heat Transfer, 2015, 137(2): 022601. doi: 10.1115/1.4028864
[14]	YAN H B, ZHANG Q C, LU T J. Heat transfer enhancement by X-type lattice in ventilated brake disc[J]. International Journal of Thermal Sciences, 2016, 107: 39-55. doi: 10.1016/j.ijthermalsci.2016.03.026
[15]	黄安坤, 温耀杰, 张百成, 等. 增材制造金属点阵结构性能研究进展[J]. 航空制造技术, 2023, 66(11): 90-101. HUANG Ankun, WEN Yaojie, ZHANG Baicheng, et al. Research progress on properties of metal lattice structures in additive manufacturing[J]. Aeronautical Manufacturing Technology, 2023, 66(11): 90-101. (in Chinese)
[16]	杨伟东, 李浩南, 王媛媛, 等. 面向增材制造的非均匀点阵结构综述[J/OL]. 机械科学与技术, 2023[2024-07-12]. https://doi.org/10.13433/j.cnki.1003-8728.20230060. YANG Weidong, LI Haonan, WANG Yuanyuan, et al. A review of heterogeneous lattice structures for additive manufacturing[J/OL]. Mechanical Science and Technology for Aerosapce Engineering, 2023[2024-07-12]. https://doi.org/10.13433/j.cnki.1003-8728.20230060. (in Chinese)
[17]	RAZANI A, PAQUETTE J W, MONTOYA B, et al. A thermal model for calculation of heat transfer enhancement by porous metal inserts[J]. Journal of Enhanced Heat Transfer, 2001, 8: 411-420. doi: 10.1615/JEnhHeatTransf.v8.i6.50
[18]	INAYAT A, FREUND H, ZEISER T, et al. Determining the specific surface area of ceramic foams: the tetrakaidecahedra model revisited[J]. Chemical Engineering Science, 2011, 66(6): 1179-1188. doi: 10.1016/j.ces.2010.12.031
[19]	KOOISTRA G. Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium[J]. Acta Materialia, 2004, 52(14): 4229-4237. doi: 10.1016/j.actamat.2004.05.039
[20]	LI M, WU L, MA L, WANG B, et al. Mechanical response of all-composite pyramidal lattice truss core sandwich structures[J]. Journal of Materials Science & Technology, 2011, 27(6): 570-576.
[21]	REN X, XIAO L, HAO Z. Multi-property cellular material design approach based on the mechanical behaviour analysis of the reinforced lattice structure[J]. Materials & Design, 2019, 174: 117785.
[22]	HYUN S, TORQUATO S. Optimal and manufacturable two-dimentional, Kagome-like cellular solids[J]. Journal of Materials Research Society, 2001, 17: 137-144.
[23]	DESHPANDE V S, FLECK N A, ASHBY M F. Effective properties of the octet-truss lattice material[J]. Journal of the Mechanics and Physics of Solids, 2001, 49: 1747-1769. doi: 10.1016/S0022-5096(01)00010-2
[24]	YUN S, KWON J, LEE D C, et al. Heat transfer and stress characteristics of additive manufactured FCCZ lattice channel using thermal fluid-structure interaction model[J]. International Journal of Heat and Mass Transfer, 2020, 149: 119187. doi: 10.1016/j.ijheatmasstransfer.2019.119187
[25]	ZHANG Q C, HAN Y B, CHEN C Q, et al. Ultralight X-type lattice sandwich structure (Ⅰ): concept, fabrication and experimental characterization[J]. Science in China(Series E): Technological Sciences, 2009, 52(8): 2147-2154. doi: 10.1007/s11431-009-0219-9
[26]	LV G X, JENSEN E, SHEN C T, et al. Effect of amine hardener molecular structure on the thermal conductivity of epoxy resins[J]. ACS Applied Polymer Materials, 2020, 3(1): 259-267.
[27]	TU Z C, MAO J K, HAN X S, et al. Prediction model for the anisotropic thermal conductivity of a 2.5-D braided ceramic matrix composite with thin-wall structure[J]. Applied Sciences, 2019, 9(5): 875. doi: 10.3390/app9050875
[28]	SWEET J N, ROTH E P, MOSS M. Thermal conductivity of Inconel 718 and 304 stainless steel[J]. International Journal of Thermophysics, 1987, 8(5): 593-606. doi: 10.1007/BF00503645
[29]	DIXIT T, NITHIARASU P, KUMAR S. Numerical evaluation of additively manufactured lattice architectures for heat sink applications[J]. International Journal of Thermal Sciences, 2021, 159: 106607. doi: 10.1016/j.ijthermalsci.2020.106607
[30]	WANG Y, DING G F. Numerical analysis of heat transfer in a manifold microchannel heat sink with high efficient copper heat spreader[J]. Microsystem Technologies, 2007, 14(3): 389-395.
[31]	JIN X, SHEN B B, YAN H B, et al. Comparative evaluations of thermofluidic characteristics of sandwich panels with X-lattice and pyramidal-lattice cores[J]. International Journal of Heat and Mass Transfer, 2018, 127: 268-282. doi: 10.1016/j.ijheatmasstransfer.2018.07.087
[32]	ZHANG X Q, JIN X, XIE G N, et al. Thermo-fluidic comparison between sandwich panels with tetrahedral lattice cores fabricated by casting and metal sheet folding[J]. Energies, 2017, 10(7): 906. doi: 10.3390/en10070906
[33]	SHEN B B, YAN H B, XUE H Q, et al. The effects of geometrical topology on fluid flow and thermal performance in Kagome cored sandwich panels[J]. Applied Thermal Engineering, 2018, 142: 79-88. doi: 10.1016/j.applthermaleng.2018.06.080
[34]	YAN H B, ZHANG Q C, CHEN W J, et al. An X-lattice cored rectangular honeycomb with enhanced convective heat transfer performance[J]. Applied Thermal Engineering, 2020, 166: 114687. doi: 10.1016/j.applthermaleng.2019.114687
[35]	JOO J H, KANG K J, KIM T, et al. Forced convective heat transfer in all metallic wire-woven bulk Kagome sandwich panels[J]. International Journal of Heat and Mass Transfer, 2011, 54(25/26): 5658-5662.
[36]	KIM T, HODSON H P, LU T J. Pressure loss and heat transfer mechanisms in a lattice-frame structured heat exchanger[J]. Proceedings of the Institution of Mechanical Engineers (Part C): Journal of Mechanical Engineering Science, 2004, 218(11): 1321-1336. doi: 10.1177/095440620421801104
[37]	YAN H B, YANG X H, LU T J, et al. Convective heat transfer in a lightweight multifunctional sandwich panel with X-type metallic lattice core[J]. Applied Thermal Engineering, 2017, 127: 1293-1304. doi: 10.1016/j.applthermaleng.2017.08.081
[38]	YAN H B, ZHANG Q C, LU T J, et al. A lightweight X-type metallic lattice in single-phase forced convection[J]. International Journal of Heat and Mass Transfer, 2015, 83: 273-283. doi: 10.1016/j.ijheatmasstransfer.2014.11.061