柱塞泵油膜压力分析的高效有限单元法

T·日诺托; A·纳哥卡

柱塞泵油膜压力分析的高效有限单元法

机械工程和计算机科学学院,斯琴托霍瓦42_200,波兰

详细信息

中图分类号: TB115；TH322
计量
- 文章访问数: 2474
- HTML全文浏览量: 87
- PDF下载量: 513
- 被引次数: 0
出版历程
- 收稿日期: 2007-11-13
- 修回日期: 2008-10-02
- 刊出日期: 2009-01-15

Efficient FEM Approach for Pressure Analysis of Oil Film in a Piston Pump

Faculty of Mechanical Engineering and Computer Science, Al.Armii Krajowej 21, 42-200 CzKM estochowa, Poland

摘要

摘要: 利用有限单元法，数值分析轴向柱塞泵缝隙高度可变时阀门板上油膜的压力分布．缝隙中油压变化的确定，通常是应用Pasynkow润滑理论中的Reynolds方程．使用基于有限单元法的自编程序，数值地求解该方程．为了提高结果的精度，基于解的残差估计，应用了加密的自适应网格．给出了依赖于泵的几何条件和工作参数的计算结果．
- 泵 /
- 缝隙高度可变 /
- 压力分布模拟 /
- 自适应有限单元法
Abstract: Numerical analysis of pressure distribution of oil film on the valve plate in variable height gap of an axial piston pump is concerned. The analysis employs the finite element method. For determination of oil pressure variations in the gap the Reynolds equation, commonly applied in the theory of lubrication by Pasynkov, was applied. The equation was solved numerically with the use of self-developed program based on finite element method. In order to obtain high accuracy of the results an adaptive mesh refinement based on residual estimations of solution errors was applied. The calculation results were represented as dependent on the geometric and working parameters of the pump.
- pump /
- variable height gap /
- pressure distribution modeling /
- adaptive finite element method

HTML全文

参考文献(14)

[1]	Osiecki A.Hydrostatic Machine Drive[M].Warsaw:Scientific-Technical Publishing House, 1998. (in Polish)
[2]	Rakowski J, Stryczek S.Dynamic measurement of gap width in valve of a multi-piston axial pump[J].Control and Hydraulic Drive, 1981, 3:7-9. (in Polish)
[3]	Stryczek S.Hydrostatic Drive[M].Vol 1.Warsaw:Scientific-Technical Publishing House, 1995. (in Polish)
[4]	Jang D S. Loss analysis in axial piston units[D].PhD Disstertation. RWTH Aachen, 1997. (in German)
[5]	Pasynkow R M, Poswianski W S.Numerical calculation of Reynolds equation taking into account variable fluid viscosity (in reference to valve plate) [J].Machine Construction Review,1993,9:26-29. (in Russian)
[6]	Ivantysyn J, Ivantysynova M.Hydrostatic Pumps and Motors[M].New Delhi:Akademia Books International, 2001.
[7]	Zienkiewicz O C,Morgan K.Finite Elements and Approximation[M].New York:John Wiley & Sons, 1983.
[8]	Zienkiewicz O C, Taylor R L.The Finite Element Method[M].Oxford:Butterworth-Heinemann, 2000.
[9]	Ainsworth M, Oden J.A Posteriori Error Estimation in Finite Element Analysis[M].New York:John Wiley & Sons, 2000.
[10]	Stewart J R, Hughes T J R.A tutorial in elementary finite element error analysis:a systematic presentation of a priori and a posteriori error estimates[J].Computational Methods in Applied Mechanical Engineering,1998,158（1/2）:1-22. doi: 10.1016/S0045-7825(97)00230-2
[11]	Johnson C, Hansbo P. Adaptive finite element methods in computational mechanics[J].Computational Methods in Applied Mechanical Engineering,1992,82:143-181.
[12]	Nagorka A, Sczygiol N.Applicability of incomplete explicit residual error estimates[A].In:Wiberg N E, Diez P, Eds.Proc ADMOS 2003 International Conference on Adaptive Modelling and Simulation[C].Gteborg,Sweden.Barcelona:CIMNE,2003,22.
[13]	Adjerid S, Flaherty J E, Babuska I.A posteriori error estimation for the finite element method-of-lines solution of parabolic problems[J].Mathematical Models and Methods in Applied Science,1999,9(2):261-286. doi: 10.1142/S0218202599000142
[14]	Kunze T, Brunner H.Vibroacoustic and optical examination of cavitation in axial-piston machines[J].Olhydraulik und Pneumatik,1996,40(8):542-546. (in German)