纤维增强复合材料靶板抗钢球贯穿的工程分析方法研究

李永池; 王志海; 王肖钧; 胡秀章

纤维增强复合材料靶板抗钢球贯穿的工程分析方法研究

中国科学技术大学近代力学系,合肥 230027

基金项目: 国家自然科学基金资助项目(10572134);瞬态物理国家重点实验室基金资助项目(51453030205ZK0101)

详细信息

作者简介:
李永池(1941- ),男,教授,博士生导师(联系人.Tel:+86-551-3606734;E-mail:ycli@ustc.edu.cn).

中图分类号: O315
计量
- 文章访问数: 2786
- HTML全文浏览量: 150
- PDF下载量: 567
- 被引次数: 0
出版历程
- 收稿日期: 2008-11-18
- 修回日期: 2008-12-10
- 刊出日期: 2009-03-15

Engineering Analysis of Penetration of a Metal Ball Into Fibre-Reinforced Composite Targets

Department of Modern Mechanics, University of Science and Technology of China, Hefei 230027, P. R. China

摘要

摘要: 介绍了钢球贯穿纤维增强复合材料靶板的一维工程近似分析方法．钢球被假定为刚体，复合材料靶被近似为横观各向同性弹塑性材料．通过将球腔膨胀模型和柱腔贯穿相结合的方法，提出了一种改进的复合材料靶抗贯穿的工程近似分析方法．利用该方法，对三维芳纶纤维编织(3DKW)复合材料靶板开展了抗钢球贯穿的工程近似分析，计算结果与实验结果一致性较好；并进一步讨论了计算中材料主要参数对靶板抗贯穿规律的影响．
- 纤维增强复合材料 /
- 工程分析 /
- 横观各向同性弹塑性材料 /
- 球腔膨胀模型 /
- 柱腔贯穿模型
Abstract: An engineering analysis method of computing the penetration problem of a steel ball penetrating into fibre-reinforced composite targets is presented. The metal ball was assumed to be a rigid body, and the composite target was regarded as a transversely isotropic elasto-plastic material. In the analysis, the spherical cavity dilatation model is coupled with the cylindrical cavity penetration method. The simulation results based on the modified model are in good agreement with the results for the 3D Kevlar woven composite (3DKW) antipenetration experiments. Furthermore, the effects of the target material parameters and impact parameters on the penetration problem were also studied.
- fibre-reinforced composites /
- engineering analysis /
- transversely isotropic elasto-plastic materials /
- spherical cavity dilatation model /
- cylindrical cavity penetration model

HTML全文

参考文献(9)

[1]	周履，范赋群.复合材料力学[M]. 北京：高等教育出版社，1991.
[2]	Naik N K,Shrirao P.Ballistic impact behaviour of woven fabric composites parametric studies[J].Materials Science and Engineering,A,2005,412(1/2):104[KG*5]. -116. doi: 10.1016/j.msea.2005.08.019
[3]	Naik N K,Doshi A V. Ballistic impact behaviour of thick composite-parametric studies[J].Composite Structures,2008,82(3):447-464. doi: 10.1016/j.compstruct.2007.01.025
[4]	Peng X Q,Cao J. A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics[J].Composites: Part A,2005,36(6):859-874. doi: 10.1016/j.compositesa.2004.08.008
[5]	Yankelevsky D Z,Adin M A. A simplified analytical method for soil penetration analysis[J].International Journal for Numerical and Analytical Methods in Geomechanics,1980,4(3):233-254. doi: 10.1002/nag.1610040304
[6]	Hanagud Sathya,Ross Bemard. Large deformation deep penetration theory for a compressible strain-hardening target material[J].AIAA Journal,1971,9(5): 905-911. doi: 10.2514/3.6294
[7]	李永池，王肖钧. 橡胶基复合材料靶抗贯穿特性的近似分析方法[J]. 爆炸与冲击，1993,13(4)：289-295.
[8]	Drysdale W H. Modeling of rate-dependent anisotropic material behavior by plasticity theory[J].Journal de Physique Collegure C5,1985,46(5):73-80.
[9]	Jenq S T,Jing H S,Chung Charles.Predicting the ballistic limit for plain woven glass/epoxy composite laminate[J].Internat J Impact Engineering,1994,15(4):451-464. doi: 10.1016/0734-743X(94)80028-8