混凝土材料裂纹尖端损伤带尺寸特性*
The Damage Process Zone Characteristics at Crack Tip in Concrete
-
摘要: 本文采用作者研究各向异性材料裂纹尖端塑性区特性的分析方法,研究了混凝土材料裂纹尖端损伤带尺寸特性.基于单轴应力假定,考虑了混凝土材料的非线性软化特性等影响,提出用两种分析模型:即能量模型和断裂模型来分别讨论.最后,还对这些模型作了比较.Abstract: This paper presents a comprehensive derivation of fracture process zone size which closely parallels similar work in fracture of metals and anisotropic solids but is adapted to conrete. Some nonlinear mechanics models of concrete materials will be discussed by using uniaxial stress assumptions. For uniaxial stress assumption, energy model and fracture model will be presented for nonlinear softening models. Finally, a comparison of those models is provided.
-
Key words:
- concrete /
- crack tip /
- damage zone /
- nonlinear softening model
-
[1] M.L.Ayari,Staitc and dynamic fracture mechanics of concrete gravity dams,Ph.D.Thesis,University of Colorado(1988). [2] Z.P.Bazant,Mechanics of distributed cracking,Appl.Mech.Rev.,39(5)(1986),674-683. [3] S.P.Shah and Y.S.Jenq,A two parameter fracture model for concrete,J.of Engr.Mech.ASCE,111(3)(1985),275-283. [4] S.E.Swartz,Fracture toughness testing of concrete at Kansas State:Is LEFM acceptable?,Proc.of Int.Conf.Fracture Mechanics of Concrtete &Masonry Structures(1982). [5] A.Hillerborg,M.Modeer and P.E.Petersson,Analysis of crack formation and crack growthing concrete by means of fracture mechanics and finite elements,Cement &Concrete Research,6(1976),773-782. [6] Z.P.Bazant,Size effect in blunt fracture:concrete,rock and metal,J.of Engr.Mecha nics,AS-CE,110(4)(1984),518-535. [7] Z.P.Bazant,Comment on Hillerborg's comparison of size effect law with fictitions crack model,Dei Poli Anniversary Volume,edited by L.Cedolin,Politecnico di Milano(1985),3335-338. [8] Ye,Zhiming,Plastic zone characteristics at crack tip in anisotropic solids,International Journal of Fracture,74(1)(1995/6),R3-R10. [9] H.Liebowitz,Fracture,An Advanced Treatise,Vol.Ⅱ,Academic Press(1986).
点击查看大图
计量
- 文章访问数: 2011
- HTML全文浏览量: 85
- PDF下载量: 500
- 被引次数: 0