突然扩张方管中三维湍流流动的数值模拟
Numerical Simulation of Three Dimensional Turbulent Flow in Suddenly Expanded Rectangular Duct
-
摘要: 本文运用SIMPLEC算法计算了突然扩张方管中的三维湍流流动,湍流模型采用k-ε模型。计算结果详细反映了突然扩张方管中三维湍流流场。从本文结果可以看出,由于突然扩张方管几何形状非轴对称,且尺寸有限,边壁对流场的作用是不可忽略的。以往文献中常见的二维突然扩张湍流的数值模拟结果与三维情况有较大差别,在靠近边壁的区域差别很大,因此对于突然扩张方管中湍流流动的数值模拟应用三维模拟。本文计算所得突然扩张截面后主回流区长度与实验结果接近。本文方法可为数值模拟突然扩张方管中湍流流场及各物理参数的分布提供有效工具。Abstract: In this paper,to simulate the three dimensional turbulent flow in suddenly expanded rectangular duct numerically,the SIMPLEC algorithm is employed to solve the incompressible Navier-Stckes equation with k-εturbulence model.The numerical resulis show well the three dimensional turbulent flow field in the rectangular duct behind the sudden expansion cross-section.and agree.fairly well with the experimental result of the length of the main circumfluence.The numerical method of this paper can be applied to numerical analysis of this kind of turbulent flow.
-
[1] B.E.Launder,et al.,The numerical computation of turbulent flow,Computer Methods in Applied Mechanics and Engineering,3(1974),269-292. [2] S.V.Patankar,Numerical Heat Transfer and Fluid Flow,Hemisphere,New York(1980). [3] J.P.Van Doormaal,et al.,Enhancements of the SIMPLE method for predicting incompressible fluid flows,Numerical Heat Transfer,7(1984),147-163. [4] D.S.Jang,et al.,Comparison of the Piso,SIMPLE and SIMPLEC algorithms for the treatment of the pressure-velocity coupling in steady flow problems,Numerical Heat Transfer,10(1986),209-228. [5] B.E.Launder and D.B.Spalding,Lectures on Mathematical Model of Turbulence,Academic,London(1972). [6] R.S.Amano,Development of a turbulence near-wall model and its application to separated and reattachment flows,Numerical Heat Transfer,7(1984),59-75. [7] 倪浩清等,浅水渠道突扩湍浮力回流数值模拟,力学学报,19(1)(i987),45-51, [8] 张政,双块修正技术——一种加快传热与流体流动数值收敛速度的方法,工程热物理学报,5(4)(1984),370-378.
计量
- 文章访问数: 1925
- HTML全文浏览量: 112
- PDF下载量: 594
- 被引次数: 0