用于平板和圆柱壳分析的势能～杂交/混合分离位移有限元格式<sup>*</sup>

陈大鹏; 潘亦甦

用于平板和圆柱壳分析的势能～杂交/混合分离位移有限元格式^*

西南交通大学

基金项目: * 国家自然科学基金资助项目

计量
- 文章访问数: 1939
- HTML全文浏览量: 127
- PDF下载量: 460
- 被引次数: 0
出版历程
- 收稿日期: 1989-06-29
- 刊出日期: 1990-09-15

A Potential-Hybrid/Mixed Finite Element Scheme for Analysis of Plates and Cylindrical Shells

Southwest Jiaotong University, Chengdu

摘要

摘要: 本文基于势能～杂交/混合有限元格式,导出了具有分离转动变量的4节点四边形Reissner-Mindlin板元MP4、MP4a和圆柱壳元MCS4.所有这些单元都显示了良好的收敛性;不含有多余机动模式;当趋于薄板/壳极限时,不存在“自锁”现象.本文还指明了在C⁰和C¹连续的单元列式中使用的修正泛函,存在相互联系.本文的方法可导出Prathap的一致场列式,也可导出RIT/SRIT的位移协调模型.
- 势能～杂文/绲合有限元 /
- 一致场 /
- 减缩积分 /
- 平板 /
- 圆柱壳
Abstract: Based on the potential-hybrid/mixed finite element scheme, 4-node quadrilateral plate-bending elements MP4, MP4a and cylindrical shell element MCS4 are derived with, the inclusion of splitting rotations. All these elements demonstrate favorable convergence behavior over the existing counterparts, free from spurious kinematic modes and do not exhibit locking phenomenon in thin platef shell limit. Inter-connections between the existing modified variational functionals for the use of formulating C⁰-and C¹-continuous elements are also indicated. Important particularizations of the present scheme include Prathop's consistent field formulation, the RIT/SRIT-compatible displacement model and so on.
- potential-hybrid/mixed F.E. /
- consistent field /
- R.I.T. /
- plate /
- cylindrical shell

HTML全文

参考文献(19)

[1]	Pian,T.H.H.,Derivation of element stiffness matrices by assumed stress distributions,AIAA J.,2(1964),1333-1336.
[2]	Pian,T.H.H.,Element stiffness-matrices for boundary compatibility and for prescribed boundary stresses,Proc.Conf.Matrix Methods in Structural Mechanics(1965).
[3]	Zienkiewicz,O.C.,et al.,Reduced integration technique in general analysis of plates and shells,Int.J.Num.Eng.,3(1971),274-290.
[4]	Belytschko,T.,et al.,A Consistant control of spurious singular models in the 9-node Lagrange element for the Laplace and Mindlin plate equations,Comp.Meth.Appl.Mech Eng.,44(1984),269-295.
[5]	Belyschko,T.,et al.,Hourglass control in linear and nonlinear problems,Comp.Meth.Appl.Mech.Eng.,43(1984),251-276.
[6]	Spilker,R.L.,et al.,The hybrid stress model for thin plates,Int.J.Num.Meth.Eng.,15(1980)1239-1260.
[7]	Spilker,R.L.,et al.,A serendipity cubic displacement hybrid stress element for thin and moderately thick plates,Int.J.Num.Meth.Eng.,15(1980),1261-1278.
[8]	Lee,S.W.and T.H.H.Pian,Improvement of plate and shell finite element by mixed formulations,AIAA J.,16(1978),29-34.
[9]	Malkus,D.S.,et al.Mixed finite element methods-reduced and selective integration techniques:a unification,Comp.Meth.Appl.Mech.Eng.,15(1978),63-81.
[10]	Simodaira,H.,Equivalence between mixed models and displacement models using reduced integration,Int.J.Num.Meth.Eng.,21(1985),89-104.
[11]	Lee,S.W.,et al.,Experience with finite element modelling of thin plate bending,Computers and Structures,19(1984),747-755.
[12]	Lee,S.W.,and J.C.Zhang,A six-node finite element for plate bending,Int.J.Nume.Meth.Eng.,21(1985),131-143.
[13]	Lee,S.W.and S.C.Wang,Mixed formulation finite elements for Mindlin theory plate bending,Int.J.Num.Meth.Eng.,18(1982),1297-1311.
[14]	Pian,T.H.H.and D.P.Chen,Alternative ways for formulation of hybrid stress element,Int.J.Num.Meth.Eng.,18(1983),1679-1684.
[15]	Pian,T.H.H.,et al.,A new formulation of hybrid/mixed finite elements,Computers and Structures,16(1983),81-87.
[16]	陈大鹏、裴亚玲C₁类薄板杂交应力法与杂交/混合法列式,FECAL-TR-87020,西南交通大学(1987).
[17]	Prathap,G.,et al.,An optimally integrated 4-node quadrilateral plate bending element,Int.J.Num.Meth.Eng.,19(1983),831-840.
[18]	Prathap,G.,A continuous four-noded cylindical shell element,Computers and Structures,21(1985).995-999.
[19]	Bogner,F.K.,et al.,A cylindrical shell discrete elements,AIAA J.,5(1967)745-750.