蜂窝夹层结构的最优参数选择

周祝林

蜂窝夹层结构的最优参数选择

周祝林

上海玻璃钢研究所

计量
- 文章访问数: 1923
- HTML全文浏览量: 110
- PDF下载量: 603
- 被引次数: 0
出版历程
- 收稿日期: 1981-01-03
- 刊出日期: 1985-06-15

Selection of the Optimum Parameters for Sandwich Construction with Honeycomb Core

Zhou Zhu-lin

Shanghai GRP Research Institute, Shanghai

摘要

摘要: 本文把夹层结构的最轻重量作为目标函数,在给定的强度和刚度的约束条件下,求出蜂窝夹层结构的四个最优参数(面板厚度t_f,蜂窝芯子厚度h_c,蜂壁厚度t_s,蜂格边长c).在强度约束条件时,最后求解一个高次方程.在刚度约束条件时,用待定参数求极值的方法把约束极值问题化为无约束极值问题.文中对结果也进行了讨论.

Abstract: The minimum weight of sandwich construction which is regarded as objective function has been discussed. Under given constraint condition of the strength or the stiffness, the four optimum parameters of sandwich construction with honeycomb core thickness of the face t_f. thickness of the honeycomb core h_c, thickness of the honeycomb wall t_s, side length of the honeycomb cell c, are evaluated. By using constraint condition of the strength, a equation of high degree is finally solved. In the constraint condition of the stiffness, the constraint optimization problem is treated as inconstraint optimization problem with the method of obtaining extreme value solution by undetermined parameter multiplication. Also, the results are discussed.

HTML全文

参考文献(15)

[1]	周祝林,玻璃钢蜂窝夹层结构制造、性能和设计简介,玻璃钢,4 (1980), 26-37.
[2]	南京大学,《最优化方法》(1978).
[3]	上海玻璃钢研究所,《玻璃钢结构设计》(1980).
[4]	上海玻璃钢研究所.玻璃钢蜂窝夹层结构基本性能,玻璃钢,2 (1975), 13-54.
[5]	周祝林,蜂窝夹层板的极限强度,力学学报,1 (1983), 62-69.
[6]	周祝林,玻璃钢蜂窝夹层柱压缩的极限强度(1979).
[7]	中国科学院力学所,夹层板壳的弯曲、稳定和振动(1978).
[8]	AD 709656.Weight optimization of structural sandwich panels (1970).
[9]	AD 715989.Minimum weight structural sandwich(1970).
[10]	Alspaugh.D.W and S.N.Huang.Minimum weight design of axisymmetric sandwich plates.AIAA J.14.12(1976).
[11]	Huang.S.N.and D.W.Alspaugh.Minimum weight sandwich beam design. AIAA J.,12(1974).
[12]	Stehlin.P,and L.Holsteinson.Minimum weight design of orthotropic sandwich panels loaded in compression and shear. FFA Report 122.
[13]	Александров А.Я.и М.П.Наумова,Онтималъные параметры треслойных пластин и пологих оболочек с сотовым заполнителем при сжатии,Расчеmы Злеменmоб Абuачuоных Консmрукчuu,4(1965).
[14]	Turvey G.J.,Uniformly loaded simply supported. antisymmetrically laminated. cross and angle-ply strips on a winkler pasternak foundation.Aeronautical Journal(1976).222-226.
[15]	Turvey.G.J.,Buckling of simply supported laminated plates on elastic foundations.Aeronautical Journal(1976).530-535．