等直蜂窝夹芯盒式矩形截面梁约束弯曲应力的分析

基金项目: 航空基金资助项目(99B51024)

Stress Analysis of Restrained Bending for Box Beam With Rectangular Cross-Section Filled by Honeycomb Core

Division 508, Department of Flight Vehicle Design and Applied Mechanics, Beijing University of Aeronautics and Astronautics, Beijing 100083, P. R. China

摘要: 在研究等截面蜂窝夹芯盒式矩形截面直梁自由弯曲位移和应力的基础上，分析其约束弯曲位移和应力附加项．对附加位移采用了分离变量假设，在此基础上，得到了几何、物理和平衡三方面的方程．采用伽辽金解法，使问题归结为具有衰减特性的二阶线性常微分方程．分析表明，应力衰减速度的快慢，取决于参数ν，而ν与载荷的大小、梁截面的几何尺寸以及材料的物理性质有关．
- 蜂窝结构 /
- 约束弯曲 /
- 应力 /
- 衰减 /
- 翘曲位移
Abstract: On the basis about studying free bending for box beam with rectangular cross-section filled by honeycomb core, supplementary displacements and stresses of restrained bending for such beam were analyzed. The hypothesis for separated variables was adopted to solve displacement. According to this, three aspect equations of geometrical, physical and balance were obtained. With Galerkin's method, it is summed up as two-order ordinary differential equations with the attenuation character. Analysis makes clear that attenuation speed of stress is concerned with a big load or a small one, geometric dimensions of cross section of beam, and physical parameter of material.
- honeycomb structure /
- constrained bending /
- stress /
- attenuation /
- warping displacement

[1]	Gerard R.Minimum Weight Analysis of Compression Structures[M].New York:New York University Press,1956.
[2]	Tahir Khalid M,ZHANG Xing.Analysis of shear stress distribution in honeycomb aircraft wing structure subjected to(s t) toque[J].Chinese Journal of Aeronautics,1997,10(3):182—187.
[3]	Tahir Khalid M.蜂窝结构力学与疲劳损伤力学的新方法[D].博士学位论文.北京：北京航空航天大学，1998，10—34.
[4]	张英世，张行.等直蜂窝夹芯盒式矩形截面杆约束扭转应力和位移的解析解[J].应用数学和力学，2004，25(7)：711—717.
[5]	Vlasov V Z.Thin-Walled Elastic Beam[M].2nd Ed.Jeruasalem:Israel Prog for Scientific Translation,1961.
[6]	von Karman T H,CHIEN Wei-zang.Torsion with variable twist[J].Journal of the Aeronautical Science,1946,15(10):503—511.
[7]	Murray N W.Introduction to the Theory of Thin-Walled Structure[M].Oxford:Clarendon Press,1984.
[8]	Hadji Argjris J,Dunne P C.The general theory of cylindrical and conical tubes under torsion and bending loads[J].The Journal of the Royal Aeronautical Society,1947,51:434,441,443.

点击查看大图