初始几何缺陷对薄圆环板弹塑性稳定性的影响
Effect of Initial Imperfections in Geometry on the Elastic- Plastic Stability of a Thin Annular Plate
-
摘要: 本文应用Neale关于增量边界值问题的广义变分原理,考察初始几何缺陷对薄圆环板弹塑性屈曲临界载荷的影响,计算表明,只要在J2增量理论的解中计入初始几何缺陷的影响,所得的结果与几何理想圆环板在塑性形变理论下的分支性屈曲载荷十分接近.Abstract: In this paper, Neale's generalized variational principle about incremental boundary-value problems is utilized to study the effect of initial imperfections in geometry on the critical loads of elastic-plastic buckling of thin annular plates. The calculations show that, if the effect of initial imperfections in geometry is taken into account in the solutions by J2 incremental theory, the results are very close to the bifurca-tional buckling loads of the perfect annular plates according to the plastic deformation theory.
-
[1] Hill,R.and M.J.Sewell,A general theory of inelastic column failure-1,Journal of the Mechanics and Physics of Solids,Vol.8,(1960),l05-111. [2] Batterman,S.C.,Plastic buckling of axially compressed cylindrical shells,AIAA Journal,Vol.3,(1965),316-325. [3] Ariaratnam,S.T.and R.N.Dubey,Instability in an elastic-plastic cylindrical shell under axial compression,J.Appl.Mech.,36,47(1969). [4] Onat,E.T.and D.C.Drucker,Inelastic instabiligy and incremental theories of plasticity.Journal of the Aerospace Sciences,Vol.20,(1953),18l-186. [5] Drucker,D.C.and E.T.Onat,On the concept of stability of inelastic systems.Journa1of the Aerospace Sciences,Vol.2l,(1954),543-548. [6] Neale,K.W.,A method for the estimation of plastic buckling loads.Int.J.Solids Structures 10,(1974),2l7-230. [7] Neale,K.W.,Bifurcation in an elastic-plastic cylindrical shell under torsion,J.Appl.Mech.40,(1973),826. [8] Neale.K W.,Effect of imperfection on the plastic buckling of rectangular plates,J.Appl.Mech.,3,(1975),115-120. [9] Neale,K.W.,A general variational theorem for the rate problem in elastic-plasticity,Int.J.Solids Struct.8,(1972),865. [10] 姜稚清,薄圆环板的弹塑性稳定性,复旦大学78级研究生毕业论文,(1981)
点击查看大图
计量
- 文章访问数: 1636
- HTML全文浏览量: 55
- PDF下载量: 465
- 被引次数: 0