玻壳成型过程诱导残余应力的数值预测

周华民; 孙强; 奚国栋; 李德群

玻壳成型过程诱导残余应力的数值预测

华中科技大学塑性成形模拟及模具技术国家重点实验室,武汉 430074

基金项目: 国家自然科学基金资助项目(50205011)

详细信息

作者简介:
周华民(19- ),男,湖南永州人,教授,博士(联系人.Tel:+86-27-87543492;E-mail:hmzhou@263.net).

中图分类号: O345
计量
- 文章访问数: 2140
- HTML全文浏览量: 40
- PDF下载量: 632
- 被引次数: 0
出版历程
- 收稿日期: 2005-10-19
- 修回日期: 2006-04-06
- 刊出日期: 2006-09-15

Numerical Prediction of Process-Induced Residual Stresses in Glass Bulb Panel

State Key Laboratory of Plastic Forming Simulation and Mold & Die Technology, Huazhong University of Science and Technology, Wuhan 430074, P. R. China

摘要

摘要: 建立了玻壳压制成型固化过程中残余应力预测的数值模拟模型，采用平行平板间玻璃熔体的固化问题来描述成型过程中残余应力形成的机理，并假定材料为热流变简单粘弹性材料．基于板壳理论，将产品视为平板单元的组合，并采用有限元法来求解，这种方法可以象全三维计算一样一层层地计算残余应力，非常适合复杂形状的薄压制成型产品．最后通过实验比较验证了所提出的模型和方法．
- 玻壳 /
- 压制成型 /
- 残余应力 /
- 数值预测
Abstract: A numerical simulation model for predicting residual stresses which arise during the solidification process of pressed glass bulb panel was developed. The solidification of a molten layer of glass between cooled parallel plates was used to model the mechanics of the buildup of residual stresses in the forming process. A thermorheologically simple thermoviscoelastic model was assumed for the material. The finite element method employed was based on the theory of shells as an assembly of flat elements. This approach calculates residual stresses layer by layer like a truly three-dimensional calculation, which is well suited for thin pressed products of complex shape. An experimental comparison is employed to verify the proposed models and methods.
- glass bulb /
- pressing /
- residual stress /
- numerical prediction

HTML全文

参考文献(14)

[1]	Leaderman H.Viscoelasticity Phenomena in Amorphous High Polymeric Systems[M].Chap 1.In:Etrich F R Ed.Rheology.New York:Academic Press，1958，1—16.
[2]	Schwarzl F,Staverman A J. Time-temperature dependence of linear viscoelastic behavior[J].Applied Physics,1952,23(8):838—843.
[3]	Gurtin M E,Sternberg G E.Further study of thermal stresses in viscoelastic materials with temperature-dependent properties[A].In:Second-Order Effects in Elasticity, Plasticity and Fluid Dynamics, International Symposium[C].Haifa, Israel.Oxford:Pergamon Press,1962, 51—76.
[4]	Lee E H,Rogers T G.Solution of stress analysis problems for linear viscoelastic materials based on measured deformation functions[J].ASME Transactions, Journal of Applied Mechanics,1963,30:127—133. doi: 10.1115/1.3630057
[5]	Narayanaswamy O S,Gardon R. Calculation of residual stresses in glass[J].Journal of American Ceramic Society,1969,52(10):554—558. doi: 10.1111/j.1151-2916.1969.tb09163.x
[6]	Mauch F,Jackle J. Thermoviscoelastic theory of freezing of stress and strain in a symmetrically cooled infinite glass plate[J].Journal of Non-Crystalline Solids,1994,170(1):73—86. doi: 10.1016/0022-3093(94)90106-6
[7]	Daudeville L,Carre H.Thermal tempering simulation of glass plates: Inner and edge residual stresses[J].Journal of Thermal Stresses,1998,21(6):667—689. doi: 10.1080/01495739808956168
[8]	Daudeville L,Bernard F,Gy R.Residual stresses near holes in tempered glass plates[A].In:Materials Science Forum[C].Uetikon-Zurich:Trans Tech Publications Inc,2002,404-407:43—48.
[9]	Bushko W C,Stokes V K.Solidification of thermoviscoelastic melts. PartⅠ—Formulation of model problem[J].Polymer Engineering and Science,1995,35(4):351—364. doi: 10.1002/pen.760350409
[10]	Lee Y B,Kwon T H,Yoon K. Numerical prediction of residual stresses and birefringence in injection/compression molded center-gated disk Part Ⅰ—Basic modeling and results for injection molding[J].Polymer Engineering and Science,2002,42(11):2246—2272. doi: 10.1002/pen.11114
[11]	Lee Y B,Kwon T H,Yoon K.Numerical prediction of residual stresses and birefringence in injection/compression molded center-gated disk Part Ⅱ—Effects of processing conditions[J].Polymer Engineering and Science,2002,42(11):2273—2292. doi: 10.1002/pen.11115
[12]	Kamal M R,Lai-Fook R L,Hernandez-Aguilar J R.Residual thermal stresses in injection moldings of thermoplastics: A theoretical experimental study[J].Polymer Engineering and Science,2002,42(5):1098—1114. doi: 10.1002/pen.11015
[13]	Aben H,Ainola L,Anton J.Integrated photoelasticity for nondestructive residual stress measurement in glass[J].Optics and Lasers in Engineering,2000,33(1):49—64. doi: 10.1016/S0143-8166(00)00018-X
[14]	Gerasimov S I,Bachurina N S，Emelyanova N N. Application of photoelasticity for analysis of residual stresses in CDs[J].Proceedings of SPIE-The International Society for Optical Engineering,2002,4900(1):606—610.