Shear Effect Analysis on Plates Based on the 4-Variable Refined Plate Theory
-
摘要: 由于中厚板壳结构或者复合材料板壳结构中横向剪切模量与面内伸缩模量之比较低,剪切效应对其结构力学行为的影响较为严重.该文基于4变量精确平板理论(refined plate theory,RPT),对平板弯曲过程中的剪切效应进行了分析和讨论.首先对RPT进行了简要的介绍,然后以受横向均布载荷的四边简支矩形板为例,进行了无量纲的数值计算,着重讨论了平板的几何尺寸和性质对其剪切效应的影响:剪切效应随着厚度增加而加强,尤其是当宽厚比小于10以后,剪切效应会迅速加强;剪切效应随横向剪切模量与面内伸缩模量的比值减小而增强;在同种条件下,“剪切”挠度在正交各向异性板中的比重始终大于其在各向同性板中的比重,并且平板越厚或者长宽比越大,两种板的剪切效应差异性越大;各向同性板中的剪切效应受长宽比的变化表现得更加敏感,其“剪切”挠度比重随长宽比的增大而持续减小,而正交各向异性板中的“剪切”挠度比重则呈现出先减小后增大的趋势.研究结果可为提高板壳结构弯曲分析的准确性提供参考.Abstract: For moderately thick plates or composite plates, due to the low ratio of the transverse shear modulus to the in-plane extension modulus, the shear effects signify much to the mechanical behavior of structures. Based on the 2-variable refined plate theory (RPT), the discussion about the shear effects on the bending of plates was carried out. The RPT was introduced briefly at first, then numerical examples of simply supported rectangular plates subjected to uniformly distributed load were given, with a focus on the geometry and property effects on the shear effects. The shear effects increase with the plate thickness, especially dramatically when the width-thickness ratio is less than 10; the shear effects increase with the ratio of the transverse shear modulus to the in-plane extension modulus; under the same condition, the proportion of the “shear” deflection in the orthotropic plate is always larger than that in the isotropic plate, and the difference of shear effects between these 2 kinds of plates becomes more significant with the increase of the thickness or the aspect ratio; the shear effects in the isotropic plates are more sensitive to the aspect ratios, and the proportion of the “shear” deflection in the isotropic plate decreases with the aspect ratio, but decreases first and increases later in the orthotropic plate.
-
Key words:
- shear effect /
- shear deformation theory /
- rectangular plate /
- isotropy /
- orthotropy
-
[1] SHIMPI R P, PATEL H G. A two variable refined plate theory for orthotropic plate analysis[J]. International Journal of Solids & Structures,2006,43(22): 6783-6799. [2] REISSNER E. The effect of transverse shear deformation on the bending of elastic plates[J]. Journal of Applied Mechanics,1945,12(3): 69-77. [3] MINDLIN R D. Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates[J]. Journal of Applied Mechanics,1951,18(1): 31-38. [4] LIBRESCU L. On the theory of anisotropic elastic shells and plates[J]. International Journal of Solids & Structures,1967,3(1): 53-68. [5] LEWIS-DUARTE M, BLIGH M C. An accurate, simple theory of the statics and dynamics of elastic plates[J]. Mechanics Research Communications,1980,7(6): 343-350. [6] REDDY J N. A refined nonlinear theory of plates with transverse shear deformation[J]. International Journal of Solids & Structures,1984,20(9): 881-896. [7] REDDY J N. A general non-linear third-order theory of plates with moderate thickness[J]. International Journal of Non-Linear Mechanics,1990,25(6): 677-686. [8] TIMOSHENKO S P. Strength of Materials, Part I: Elementary Theory and Problems [M]. New York: Van Nostrand, 1940. [9] DONNELL L H. Discussion of paper by Reissner E: the effect of transverse shear deformation on the bending of elastic plates[J]. Journal of Applied Mechanics-Transactions of the Asme,1946,68: 249-252. [10] DAVIDSON T, MEIER J H. Impact on prismatic bars[J]. Proc SESA,1946,4: 88-111. [11] ANDERSON R A. Flexural vibrations in uniform beams according to the Timoshenko theory[J]. Journal of Applied Mechanics-Transactions of the Asme,1953,20(4): 504-510. [12] JACOBSEN L S. Engineering Vibrations: With Applications to Structures and Machinery [M]. Mcgraw-Hall Book Company, Inc, 1958. [13] HUFFINGTON N J. Response of elastic columns to axial pulse loading[J]. AIAA Journal,1963,1(9): 2099-2104. [14] ALLEN H G, NEAL B G. Analysis and Design of Structural Sandwich Panels [M]. Berlin: Pergamon Press, 1969. [15] MURTY A V K. Flexure of composite plates[J]. Composite Structures,1987,7(3): 161-177. [16] SENTHILNATHAN N R, LIM S P, LEE K H, et al. Buckling of shear-deformable plates[J]. AIAA Journal,1987,25(9): 1268-1271. [17] ZENKERT D. An Introduction to Sandwich Construction [M]. London: Chamelon Press, 1995. [18] HAN S C, YOON S H, CHANG S Y. Bending and dynamic characteristics of antisymmetric laminated composite plates considering a simplified higherorder shear deformation[J]. J KSSC, 1997,9(4): 601-609.(in Korean). [19] SHIMPI R P. Refined plate theory and its variants[J]. AIAA Journal,2002,40(1): 137-146. [20] SENJANOVIC I,CATIPOVIC I, TOMASEVIC S. Coupled flexural and torsional vibrations of ship-like girders[J]. Thin-Walled Structures,2007,45(12): 1002-1021. [21] SENJANOVIC I, TOMASEVIC S, VLADIMIR N. An advanced theory of thin-walled girders with application to ship vibrations[J]. Marine Structures,2009,22(3): 387-437. [22] VO T P, THAI H T. Static behavior of composite beams using various refined shear deformation theories[J]. Composite Structures,2012,94(8): 2513-2522. [23] THAI H T, VO T P. A new sinusoidal shear deformation theory for bending, buckling, and vibration of functionally graded plates[J]. Applied Mathematical Modelling,2013,37(5): 3269-3281. [24] ENDO M, KIMURA N. An alternative formulation of the boundary value problem for the Timoshenko beam and Mindlin plate[J]. Journal of Sound & Vibration,2007,301(1): 355-373. [25] SHIMPI R P, PATEL H G, ARYA H. New first-order shear deformation plate theories[J]. Journal of Applied Mechanics,2007,74(3): 523-533. [26] THAI H T, CHOI D H. A simple first-order shear deformation theory for the bending and free vibration analysis of functionally graded plates[J]. Composite Structures,2013,101(15): 332-340. [27] THAI H T, CHOI D H. A simple first-order shear deformation theory for laminated composite plates[J]. Composite Structures,2013,106(12): 754-763. [28] KOAKOWSKI Z, KRLAK M. Modified continuity conditions of plates in beam-column using the Mindlin plate theory[J]. Thin-Walled Structures,2014,74(1): 261-268. [29] ENDO M. An alternative first-order shear deformation concept and its application to beam, plate and cylindrical shell models[J]. Composite Structures,2016,146: 50-61. [30] ENDO M. Study on an alternative deformation concept for the Timoshenko beam and Mindlin plate models[J]. International Journal of Engineering Science,2015,87: 32-46. [31] ENDO M. “One-half order shear deformation theory” as a new naming for the transverse, but not in-plane rotational, shear deformable structural models[J]. International Journal of Mechanical Sciences,2017,122: 384-391. [32] HAN S C, PARK W T, JUNG W Y. A four-variable refined plate theory for dynamic stability analysis of S-FGM plates based on physical neutral surface[J]. Composite Structures,2015,131:1081-1089. [33] 哈吉 L, 艾特阿特曼 H A, 杜尼斯 A, 等. 应用4变量精确平板理论分析FG复合板的自由振动[J]. 应用数学和力学, 2011,32(7): 866-882. (HADJI L, ATMANE H A, TOUNSI A, et al. Free vibration of functionally graded sandwich plates using four-variable refined plate theory[J]. Applied Mathematics and Mechanics,2011,32(7): 866-882.(in Chinese)) [34] MECHAB I, ATMANE H A, TOUNSI A, et al. A two variable refined plate theory for the bending analysis of functionally graded plates[J]. Acta Mechanica Sinica,2010,26(6): 941-949. [35] THAI H T, NGUYEN T K, VO T P, et al. A new simple shear deformation plate theory[J]. Composite Structures,2017,171: 277-285.
点击查看大图
计量
- 文章访问数: 739
- HTML全文浏览量: 109
- PDF下载量: 544
- 被引次数: 0