[1] |
毛巨正, 郑宏飞, 杨军伟, 等. 多效竖管降膜蒸发太阳能海水淡化装置性能研究[J]. 太阳能学报, 2017,38(10): 2743-2748.(MAO Juzheng, ZHENG Hongfei, YANG Junwei, et al. Performance investigation of solar desalination device with multi-effect vertical tube falling film evaporation[J]. Acta Energiae Solaris Sinica,2017,38(10): 2743-2748.(in Chinese))
|
[2] |
颜雪娟. 降膜蒸发器液膜流动对传热性能的影响[J]. 机械设计与研究, 2015,31(6): 20-23, 27.(YAN Xuejuan. Experimental study on the influence of the liquid film flow on heat transfer performance in falling film evaporators[J]. Machine Design and Research,2015,31(6): 20-23, 27.(in Chinese))
|
[3] |
闫鸿志, 胡斌, 王如竹. 水-水降膜蒸发器的模拟仿真和优化[J]. 化工学报, 2018,〖STHZ〗 69(S2): 68-75.(YAN Hongzhi, HU Bin, WANG Ruzhu. Modeling and optimization of water-to-water falling film evaporator[J]. CIESC Journal,2018,69(S2): 68-75.(in Chinese))
|
[4] |
LI C. Characteristics of the high-temperature water film evaporation with countercurrent turbulent air flow in the duct[J]. Annals of Nuclear Energy,2019,130: 1-7.
|
[5] |
CHERIF A S, KASSIM M A, BANHAMOU B, et al. Experimental and numerical study of mixed convection heat and mass transfer in a vertical channel with film evaporation[J]. International of Journal of Thermal Sciences,2011,50(6): 942-953.
|
[6] |
RADHIA R B, CORRIOU J P, HARMAND S, et al. Numerical study of evaporation in a vertical annulus heated at the inner wall[J]. International of Journal of Thermal Sciences,2011,50(10): 1996-2005.
|
[7] |
袁浩爽, 师诚承, 张琳, 等. 机械蒸汽再压缩降膜蒸发器的沸腾传热特性[J]. 化学工程, 2018,46(11): 16-20.(YUAN Haoshuang, SHI Chengcheng, ZHANG Lin, et al. Boiling heat transfer characteristics on falling film evaporator of mechanical vapor recompression[J]. Chemical Engineering (China),2018,46(11): 16-20.(in Chinese))
|
[8] |
娄晓博, 凌长明, 李儒松, 等. 脉动气流对沸腾表面水分蒸发影响的数值模拟[J]. 广东海洋大学学报, 2018,38(1): 73-79.(LOU Xiaobo, LING Changming, LI Rusong, et al. Numerical simulation of the effect of pulsating airflow on water evaporation of boiling surface[J]. Journal of Guangdong Ocean University,2018,38(1): 73-79.(in Chinese)
|
[9] |
杨卫卫, 何雅玲, 徐超, 等. 平直通道中层流脉动流动的数值模拟[J]. 西安交通大学学报, 2004,38(9): 925-928.(YANG Weiwei, HE Yaling, XU Chao, et al. Numerical study of laminar pulsating flow in a channel[J]. Journal of Xi’an Jiaotong University,2004,38(9): 925-928.(in Chinese))
|
[10] |
谢公南, 王秋旺, 曾敏, 等. 脉动参数对波纹通道内传热强化的影响[J]. 计算物理, 2006,23(6): 673-678.(XIE Gongnan, WANG Qiuwang, ZENG Min, et al. Enhanced heat transfer of pulsating flows in a wavy channel[J]. Chinese Journal of Computational Physics,2006,23(6): 673-678.(in Chinese))
|
[11] |
翟明, 董芃, 王希影, 等. 圆管湍流脉动流动与换热的数值模拟[J]. 中国电机工程学报, 2009,29(20): 85-91.(ZHAI Ming, DONG Peng, WANG Xiying, et al. Numerical simulation of turbulent pulsating flow and heat transfer in tubes[J]. Proceedings of CSEE,2009,29(20): 85-91.(in Chinese))
|
[12] |
李国能, 项忠晓, 郑友取, 等. 层流中脉动气流横掠平板强化传热[J]. 化工学报, 2012,63(6): 1717-1722.(LI Guoneng, XIANG Zhongxiao, ZHENG Youqu, et al. Heat transfer enhancement with a flat plane in laminar pulsating flow[J]. CIESC Journal,2012,63(6): 1717-1722.(in Chinese))
|
[13] |
魏进家, 胡春波, 姜培正, 等. 密相液固两相湍流 k-ε-T 模型及其在管道两相流中的应用[J]. 应用数学和力学, 2000,21(5): 468-476.(WEI Jinjia, HU Chunbo, JIANG Peizheng, et al. k-ε-T model of dense liquid-solid two-phase turbulent flow and its application to the pipe flow[J]. Applied Mathematics and Mechanics,2000,〖STHZ〗 21(5): 468-476.(in Chinese))
|
[14] |
刘儒勋, 刘晓平, 张磊, 等. 运动界面的追踪和重构方法[J]. 应用数学和力学, 2004,25(3): 279-290.(LIU Ruxun, LIU Xiaoping, ZHANG Lei, et al. Tracking and reconstruction methods for moving-interfaces[J]. Applied Mathematics and Mechanics,2004,25(3): 279-290.(in Chinese))
|
[15] |
凌长明, 李儒松, 徐青, 等. 反渗透海水淡化中脉动能的利用方法及特性研究[J]. 液压气动与密封, 2019,39(3): 30-33.(LING Changming, LI Rusong, XU Qing, et al. Study on utilization method and the properties of fluctuation energy in integrated technology of seawater desalination and salt making[J]. Hydraulics Pneumatics & Seals,2019,39(3): 30-33.(in Chinese))
|
[16] |
陈昊阳. 板式换热器降膜蒸发传热过程的数值模拟研究[D]. 硕士学位论文. 武汉: 华中科技大学, 2013.(CHEN Haoyang. Numerical simulation research on falling film evaporation heat transfer process in evaporative plate heat exchanger[D]. Master Thesis. Wuhan: Huazhong University of Science and Technology, 2013.(in Chinese))
|