[1] |
Lee H Y,Kim J B,Yoo B.Green's function approach for crack propagation problem
|
[2] |
Jones I S.Impulse response model of thermal striping for hollow cylindrical geo
|
[3] |
Young L J.Lifetime evaluation of cracked shaft sleeve of reactor coolant pump under thermal striping[J].International Journal of Solids and Structures, 2001,38(46/47):8345-8358. doi: 10.1016/S0020-7683(01)00116-0
|
[4] |
Meshii T,Shibata K,Watanabe K.Simplified method to evaluate upper limit stres
|
[5] |
Yves Lejeaila,Kasahara N.Thermal fatigue evaluation of cylinders and plates subjected to fluid temperature fluctuations[J].International Journal of Fatigue,2005,27(7):768-772. doi: 10.1016/j.ijfatigue.2005.01.007
|
[6] |
Labbe O,Maglaras E,Garnier F.Large-eddy simulation of a turbulent jet and wake vortex interaction[J].Computers & Fluids,2007,36(4):772-785.
|
[7] |
Petri Majander,Siikonen T.Large-eddy simulation of a round jet in a cross-flow[J].International Journal of Heat and Fluid Flow,2006,27(3):402-415. doi: 10.1016/j.ijheatfluidflow.2006.01.004
|
[8] |
Fan J Y,Zhang Y,WANG D Z.Large-eddy simulation of three-dimensional vortical structures for an impinging transverse jet in the near region[J].Journal of Hydrodynamics Ser B, 2007,19(3):314-321. doi: 10.1016/S1001-6058(07)60064-X
|
[9] |
Popovac M,Hanjalic K.Large-eddy simulations of flow over a jet-impinged wall-mounted cube in a cross stream[J].International Journal of Heat and Fluid Flow, 2007,28(6):1360-1378. doi: 10.1016/j.ijheatfluidflow.2007.05.009
|
[10] |
Afgan I,Moulinec C,Prosser R.et al.Large eddy simulation of turbulent flow for wall mounted cantilever cylinders of aspect ratio 6 and 10[J].International Journal of Heat and Fluid Flow,2007,28(4):561-574. doi: 10.1016/j.ijheatfluidflow.2007.04.014
|
[11] |
Jiang P,Guo Y C,Chan C K,et al.Frequency characteristics of coherent structures and their excitations in small aspect-ratio rectangular jets using large eddy simulation[J].Computers & Fluids, 2007,36(3):611-621.
|
[12] |
Lee J I,Hu L W,Saha P,et al.Numerical analysis of thermal striping induced high cycle thermal fatigue in a mixing tee[J].Nuclear Engineering and Design,2009,239(5):833-839. doi: 10.1016/j.nucengdes.2008.06.014
|
[13] |
Hu L W,Kazimi M S.LES benchmark study of high cycle temperature fluctuations caused by thermal striping in a mixing tee[J].International Journal of Heat and Fluid Flow,2006,27(1):54-64. doi: 10.1016/j.ijheatfluidflow.2005.08.001
|
[14] |
Wegner B,Huai Y,Sadiki A.Comparative study of turbulent mixing in jet in cross-flow configurations using LES[J].International Journal of Heat and Fluid Flow,2004,25(5):767-775. doi: 10.1016/j.ijheatfluidflow.2004.05.015
|
[15] |
Tokuhiro A,Kimura N.An experimental investigation on thermal striping mixing phenomena of a vertical non-buoyant jet with two adjacent buoyant jets as measured by ultrasound doppler velocimetry[J].Nuclear Engineering and Design,1999,188:49-73. doi: 10.1016/S0029-5493(99)00006-0
|
[16] |
Naoya Fukushima,Koji Fukagata,Kasagi N.Numerical and experimental study on turbulent thermal mixing in a T-junction flow[A].In:The 6th ASME-JSME Thermal Engineering Joint Conference[C].Hawaii:2003,TED-AJ03-582.
|
[17] |
Temmerman L,Leschizner M A,Mellen C P,et al.Investigation of wall-function approximations and subgrid-scale models in large eddy simulation of spearated flow in a channel with streamwise periodic constrictions[J].International Journal of Heat and Fluid Flow,2003,24(2):157-180. doi: 10.1016/S0142-727X(02)00222-9
|
[18] |
Wang Y,Yuan G,Yoon Y K,et al.A large eddy simulation (LES) for synthetic jet thermal management[J].International Journal of Heat and Mass Transfer,2006,49(13/14):2173-2179. doi: 10.1016/j.ijheatmasstransfer.2005.11.024
|
[19] |
Smagorinsky J.General circulation experiments with the primitive equations-I the basic experiment[J].Monthly Weather Review,1963,91(3):99-164. doi: 10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2
|