Elastic-Plastic Analysis of an Antiplane Crack Near the Crack Surface Region
-
摘要: 裂纹自由面附近的弹塑性场和弹塑性边界是裂纹弹塑性分析的重要内容,但现有的方法难以对其进行有效描述.该文发展了裂纹线场分析方法的研究思路,将裂纹面视为裂纹线的拓展部分,对理想弹塑性Ⅲ型裂纹进行了裂纹面附近弹塑性场的分析,得出了裂纹面附近弹塑性应力场、塑性区长度和弹塑性边界的单位法向量.分析结果表明,可放弃传统的小范围屈服条件.Abstract: The elastic-plastic stress distribution and the elastic-plastic boundary configuration near the crack surface region are sign ificant but hard to obtain by means of conventional analysis. The crack line analysis method was developed through considering the crack surface as an extension of the crack line. The stresses in the plastic zone, the length and the unit normal vector of the elastic-plastic boundary near the crack surface region were obtained for an antiplane crack in an elastic-perfectly plastic solid. The usual small scale yielding assumptions have been abandoned during the analysis.
-
[1] Achenbach J D, Li Z L. Plane stress crack line fields for crack growth in an elastic-perfectly plastic material[J]. Engineering Fracture Mechanics, 1984, 20(3): 534-544. [2] GUO Quan-xin, LI Ke-rong. Plastic deformation ahead of a plane stress tensile crack growth in an elastic-perfectly plastic solid[J]. Engineering Fracture Mechanics, 1987, 28(2): 139-146. doi: 10.1016/0013-7944(87)90209-8 [3] YI Zhi-jian. The new and analytical solution for model Ⅲ crack in an elastic-perfectly plastic material[J]. Engineering Fracture Mechanics, 1992, 42(5): 833-840. doi: 10.1016/0013-7944(92)90064-L [4] YI Zhi-jian. The most recent solutions of near crack line fields for mode Ⅲ cracks[J]. Engineering Fracture Mechanics, 1994, 47(1): 147-155. doi: 10.1016/0013-7944(94)90245-3 [5] YI Zhi-jian, WANG Shi-jie, WU Heng-li. Precise elastic-plastic analysis of crack line field for mode II plane stain crack[J]. International Journal of Fracture, 1996, 80(4): 353-363. doi: 10.1007/BF00018512 [6] YI Zhi-jian, WANG Shi-jie and WANG Xiang-jian. Precise solutions of elastic-plastic crack line fields for cracked plate loaded by antiplane point forces[J]. Engineering Fracture Mechanics, 1997, 57(1): 75-83. doi: 10.1016/S0013-7944(97)00003-9 [7] 易志坚, 赵朝华, 杨庆国, 彭凯,黄宗明. Ⅲ型裂纹弹塑性场在裂纹线附近匹配方程的一般形式[J]. 应用数学和力学,2009, 30(5): 515-524. [8] 吴承平,王成. 裂纹面任意点受反平面集中力时裂纹线场的弹塑性分析 [J]. 应用数学和力学, 1996, 17(12): 1059-1064. [9] 王成, 张录坤. 有限宽板裂纹在面受两对反平面集中力时裂纹线场的弹塑性分析[J]. 应用数学和力学, 1998, 19(6): 513-520. [10] 王成, 吴承平. 偏心裂纹板在裂纹面受两对反平面点力的弹塑性解析解[J]. 应用数学和力学, 2003, 24(7): 691-698. [11] WANG Jian-hua, ZHOU Xiao-ping. Near crack line elastic-plastic analysis for an infinite plate loaded by two pairs of point tensile forces[J]. Mechanics Research Communication, 2004, 31(4): 415-420. doi: 10.1016/j.mechrescom.2003.10.006 [12] Chitaley A D, McClintock F A. Elastic-plastic mechanics of steady crack growth under antiplane shear[J]. Journal of the Mechanics and Physics of Solids, 1971, 19(3): 147-163. doi: 10.1016/0022-5096(71)90025-1
点击查看大图
计量
- 文章访问数: 1451
- HTML全文浏览量: 77
- PDF下载量: 819
- 被引次数: 0