受热弹性复合球体空化问题的分析

尚新春; 张锐; 任会兰

doi:10.3879/j.issn.1000-0887.2011.05.005

受热弹性复合球体空化问题的分析

doi: 10.3879/j.issn.1000-0887.2011.05.005

北京科技大学数学力学系, 北京 100083;2.北京科技大学国家材料服役安全科学中心,北京 100083;3.北京理工大学爆炸科学与技术国家重点实验室,北京 100081

基金项目: 国家自然科学基金资助项目(10772024)

详细信息

作者简介:
尚新春(1958- ),男,山西人,教授,博士,博士生导师(联系人.E-mail:shangxc@ustb.edu.cn).

中图分类号: O343；O175；TB301；TG113
计量
- 文章访问数: 1307
- HTML全文浏览量: 80
- PDF下载量: 817
- 被引次数: 0
出版历程
- 收稿日期: 2011-01-04
- 修回日期: 2011-03-04
- 刊出日期: 2011-05-15

Analysis for Cavitation Problem of Elastic Composite Ball Heated

Department of Mathematics and Mechanics, University of Science and Technology Beijing, Beijing 100083, P. R. China;

摘要

摘要: 研究了由两种弹性固体材料组成的复合球体，在均匀变温场作用下的空化问题．采用了几何大变形的有限对数应变度量和Hooke弹性固体材料的本构关系，建立了问题的非线性数学模型．求出了复合球体大变形热弹性膨胀的参数形式的解析解．给出了空穴萌生时临界温度随几何参数和材料参数的变化曲线,以及空穴增长的分岔曲线．算例的数值结果指出：超过临界温度后空穴半径将迅速增大，并且空穴萌生时环向应力将成为无限大，这意味着如果内部球体是弹塑性材料，则会在空穴表面附近产生塑性变形而造成材料的局部损伤．另外，当内部球体材料的弹性接近于不可压时，复合球体可以在较低的变温下空化．
- 空化 /
- 热膨胀 /
- 非线性大变形 /
- 复合球体
Abstract: The cavitation problem of composite ball, composed by two elastic solid materials and in uniformtemperature, was investigated. The nonlinear mathematical model of the problem was established by using finite logarithmic strain measure for geometric large deformation and by employing Hooke law for elastic solid. Analytic solutions in the form of parameter were derived for thermal dilatation of the composite ball with large elastic deformation. Solution curves were given to describe variations of the critical temperature in cavitation with the geometric and material parameters. Bifurcation curve was also given to reveal cavity growth after void nucleation. The numeric results for a computational example indicated that radius of cavity would rapidly enlarge over critical temperature, and the loop stress would become infinite with void nucleation. This means the materials near the cavity would produce plastic deformation which leads to local failure and fracture if the material of internal ball is elastoplastic. In addition, the cavitation for the composite ball could appear in a low temperature if elastic property for the material of internal ball is close to be uncompressible.
- cavitation /
- thermal dilatation /
- nonlinear large deformation /
- composite ball

HTML全文

参考文献(14)

[1]	Tvergaard V. Material failure by void growth to coalescence[J].Advances in Applied Mechanics.1990, 27: 83-151.
[2]	McClinitock F A. A criterion for ductile fracture by growth of holes [J]. J Appl Mech, 1968, 35: 363-371. doi: 10.1115/1.3601204
[3]	Rice J R, Tracey D M. On the ductile enlargement of voids in triaxial stress fields[J]. J Mech Phys Solids, 1969, 17(3): 201-217. doi: 10.1016/0022-5096(69)90033-7
[4]	Ball J M. Discontinuous equilibrium solutions and cavitation in nonlinear elasticity[J]. Phil Trans R Soc London, A, 1982, 306(1496): 557-610. doi: 10.1098/rsta.1982.0095
[5]	Horgan C O, Abeyaratne R. A bifurcation problem for a compressible nonlinearly elastic medium: growth of a micro-void [J]. J Elasticity, 1986, 16(2): 189-200. doi: 10.1007/BF00043585
[6]	Horgan C O, Polignone D A. Cavitation in nonlinearly elastic solid: a review[J]. ASME Appl Mech Rev, 1995, 48(6): 471-485. doi: 10.1115/1.3005108
[7]	尚新春，程昌钧. 超弹性材料中的球形空穴分岔[J]. 力学学报, 1996， 28(6)：751-755.(SHANG Xin-chun, CHENG Chang-jun. The spherical cavitation bifurcation in hyperelstic materials[J]. Acta Mech Sinica, 1996, 28(6)：751-755.(in Chinese))
[8]	SHANG Xin-chun, CHENG Chang-jun. Exact solution for cavitated bifurcation for compressible hyperelastic material[J]. Int J Eng Sci , 2001, 39(10):1101-1117. doi: 10.1016/S0020-7225(00)00090-2
[9]	金明，黄克服，武际可.Hooke材料的微孔形空穴分岔[J]. 固体力学学报, 2001, 22(3): 281-286. (JIN Ming, HUANG Ke-fu, WU Ji-ke. A study of the catastrophe and the cavitation for a spherical cavity in Hooke’s material with 1/2 Poisson’s ratio [J]. Acta Mechnica Solida Sinica, 2001, 22(3):281-286. (in Chinese))
[10]	SHANG Xin-chun, CHENG Chang-jun. Cavitation in Hookean elastic membranes[J]. Acta Mech Solida, 2002, 15(1):126-129.
[11]	尚新春，程昌钧. 弹性固体材料中的空穴萌生于增长[J]. 北京科技大学学报, 2002, 24(3): 380-382. (SHANG Xin-chun, CHENG Chang-jun. Void nucleation and growth for elastic solid materials[J]. J University of Science and Technology Beijing, 2002, 24(3): 380-382. (in Chinese))
[12]	SHANG Xin-chun, CHENG Chang-jun, HU Yin-yan. Cavitated bifurcation in Hookean elastic and elastic-plastic materials[C]CHIEN Wei-zang.Proceeding of 4th International Conference on Nonlinear Mechanical. Shanghai: Shanghai University Press, 2002: 315-319.
[13]	宁建国, 李伟, 郝玖锋, 刘海燕, 黄筑平. 平面应变条件下孔洞化不稳定性问题的研究. 固体力学学报, 2003, 24(3): 259-263.(NING Jian-guo, LI Wei, HAO Jiu-feng, LIU Hai-yan, HUANG Zhu-ping. Influence of the temperature on the cavitation instability under plane strain condition[J]. Acta Mech Solida Sinica, 2003, 24(3): 259-263. (in Chinese))
[14]	任九生，程昌钧. 热超弹性材料中的空穴生成问题[J]. 固体力学学报，2004, 25(3)：275-278．(REN Jiu-sheng, CHENG Chang-jun. Cavitation problem for thermohyperelastic materials[J]. Acta Mech Solida Sinica, 2004, 25(3): 275-278 (in Chinese))