Dynamic Stress Concentrations in Stretching Plates by Using the Refined Dynamic Theory
-
摘要: 过去,对拉伸平板考虑应力集中的工程设计多借鉴弹性力学平面问题分析求解结果,例如弹性力学Kirsch问题的解或弹性动力学平面问题的解.基于厚板拉伸振动精确化方程,对含圆孔平板中弹性波散射与动应力集中问题进行了研究.研究结果表明:1) 两种模型得到的开孔附近的应力是不同的;2) 当入射波波数变大或者说入射波频率变高时,动应力集中系数最大值趋于单位1.含孔平板拉伸振动的动应力集中系数最大值达到3.30,以及基于弹性动力学平面问题模型得到的结果为2.77.对数值计算结果做了分析讨论, 可以看到,当孔径厚度比是a/h=0.10,基于平板拉伸振动精确化方程得到的动应力集中系数可以达到最大值,超出基于弹性动力学平面问题所得到结果的19%.分析方法和数值计算结果可望能在工程平板结构的动力学分析和强度设计中得到应用.
-
关键词:
- 平板拉伸振动精确化方程 /
- 弹性波散射与动应力集中 /
- 厚壁结构动力学 /
- 剪应力一阶矩
Abstract: In the past, the solution of elasticity plane problems is often used to investigate stress concentrations for the engineering design instead of solution of stretching plates. For example, Kirsch’s solution and the solution of elastodynamics plane problems. Based on the refined dynamic equation of stretching plates, elastic wave scattering and dynamic stress concentrations in plates with a circular cutout were studied. Numerical results demonstrated that dynamic stress concentration factors in stretching plates were different from the one which were obtained by elasticity plane problems and dynamic stress concentration factors trended to unit 1 at the high frequency of incident waves. The dynamic stress concentration factor of stretching plates with cutouts is up to a maximum of 3.30, and the one is 2.77 by using plane problem of elastic dynamics. The comparison of the numerical results was made and discussed. It is showed that as the cutout radius ratio to the thickness is smaller a/h=0.10,using the refined equation the dynamic moment factor may approach to the maximum value, which is more 19% than the result from the solution of plane problems of elastic dynamics. The results are more accurate because the refined equation of plates stretching is derivative without using any engineering hypotheses. The numerical results and the method can be used to analyze the dynamics and strength of platelike structures. -
[1] 萨文 Γ H.孔附近的应力集中[M]. 卢鼎霞 译. 北京:科学出版社, 1965.(Savin E H.Stress Concentrations at the Edge of a Hole[M]. LU Ding-xia trans. Beijing: Science Press, 1965.(Chinese version)) [2] Liu D K, Hu C. Scattering of flexural wave and dynamic stress concentration in Mindlin thick plates[J].Acta Mech Sin,1996, 12(2): 169-185. [3] Reissner E. The effect of transverse shear deformation on the bending of elastic plates[J].ASME, J Appl Mech,1945, 12(2):69-77. [4] Mindlin R D. Influence of rotatory inertia and shear on flexural motions of isotropic elastic plates[J].ASME, J Appl Mech,1951, 18(2): 31-36. [5] Pao Y H, Mao C C. Diffractions of flexural waves by a cavity in an elastic plate[J].AIAA J,1964, 2(11): 2004-2010. [6] Vemula C, Norris A N. Flexural wave propagation and scattering on thin plates using Mindlin theory[J].Wave Motion,1997, 26(1): 1-12. [7] 胡超, 周传平, Fai Ma, 刘殿魁.基于平板弯曲振动精确化方程求解动应力集中问题[J]. 力学学报, 2012, 44(5): 938-942.(HU Chao, ZHOU Chuan-ping, Fai Ma, LIU Dian-kui. Dynamic stress concentrations by using refined equations of plate bending[J].Chinese Journal of Theoretical and Applied Mechanics,2012, 44(5): 938-942. (in Chinese)) [8] Hwu C B. Boundary element formulation for the coupled stretchingbending analysis of thin laminated plates[J].Engineering Analysis With Boundary Elements,2012, 36(6): 1027-1039. [9] 胡超, Fai Ma, 马兴瑞, 黄文虎. 厚板弯曲与拉伸振动精化理论及其求解新途径[J]. 中国科学,G辑, 物理、力学、天文学, 2012, 42(5): 522-530. (HU Chao, Fai Ma, MA Xing-rui, HUANG Wen-hu. Refined dynamic theory of thick plates and its new formulism[J].Sci China, ser G, Phys, Mech, Astron,2012, 42(5):522-530. (in Chinese)) [10] 鲍亦兴, 毛昭宙. 弹性波的衍射与动应力集中[M]. 刘殿魁, 苏先樾 译. 北京: 科学出版社, 1993: 230-231.(Pao Y H, Mao C C.Diffraction of Elastic Waves and Dynamic Stress Concentrations [M]. LIU Dian-kui, SU Xian-yue trans. Beijing: Science Press, 1993: 230231. (Chinese version))
计量
- 文章访问数: 1863
- HTML全文浏览量: 132
- PDF下载量: 1291
- 被引次数: 0