不同结构板翅式油冷器单层冷却液侧换热特性的数值模拟

刘亚平; 曾忠; 许小龙; 张臻; 屈菁菁

doi:10.3879/j.issn.1000-0887.2014.07.011

不同结构板翅式油冷器单层冷却液侧换热特性的数值模拟

doi: 10.3879/j.issn.1000-0887.2014.07.011

¹重庆大学航空航天学院工程力学系, 重庆 400044;²煤矿灾害动力学与控制国家重点实验室(重庆大学), 重庆 400044

基金项目: 国家自然科学基金（10872222;50921063）

详细信息

作者简介:
刘亚平（1987—），女，湖南人，硕士生(E-mail: ya634984094@163.com)

中图分类号: O357.1
计量
- 文章访问数: 1024
- HTML全文浏览量: 101
- PDF下载量: 688
- 被引次数: 0
出版历程
- 收稿日期: 2014-01-06
- 修回日期: 2014-04-29
- 刊出日期: 2014-07-15

Numerical Simulation of Monolayer Coolant-Side Heat Transfer Characteristics for Plate-Fin Oil Coolers With Different Structures

¹Department of Engineering Mechanics, College of Aerospace Engineering, Chongqing University, Chongqing 400044, P.R.China;²State Key Laboratory of Coal Mine Disaster Dynamics and Control(Chongqing University), Chongqing 400044,P.R.China

Funds: The National Natural Science Foundation of China（10872222;50921063）

摘要

摘要: 基于多孔介质模型，针对5种内部结构不同的板翅式油冷器单层冷却液侧的流动和热输运过程，利用有限体积法进行数值模拟.研究结果表明：在翅片布置方向相同情况下，进出口对角布置时冷却液的压力和温度场分布比同侧布置进出口时均匀，温差较同侧布置时大.在出口位置相同情况下，翅片横向布置时冷却液的压力和温度分布要比纵向布置时均匀，但压差大，温差不大.带隔板结构冷却液的温差最大，但压差要高一个数量级.
- 多孔介质模型 /
- 板翅式油冷器 /
- 数值模拟 /
- 有限体积法
Abstract: Based on the porous medium model, the monolayer coolant-side flow and heat transfer in the plate-fin oil coolers with 5 kinds of structures were numerically simulated by means of the finite volume method. The results indicate that the distribution of pressure and temperature is more even and the temperature difference is larger when the inlet and outlet are diagonally positioned than they are positioned on the same side, with the fins’layouts in the same direction. Given the same outlet positions, the distribution of pressure and temperature in the case of transverse arrangement of fins is more even, and the pressure difference is larger than those in the case of vertical arrangement, while similar temperature differences occur in both cases. The plate-fin oil cooler with clapboards has the biggest temperature difference as well as pressure difference 1 order of magnitude higher than that of other structures.
- porous medium model /
- plate-fin oil cooler /
- numerical simulation /
- finite volume method

HTML全文

参考文献(11)

[1]	胡兆吉, 李红, 邹文楠. 铝制板翅式油冷器单层水侧流动特性的数值模拟[J]. 南昌大学学报（工科版）, 2010,32(4): 353-358.(HU Zhao-ji, LI Hong, ZOU Wen-nan. Numerical simulation for monolayer water-side flow characteristics of aluminum plate-fin oil cooler[J]. Journal of Nanchang University (Engineering & Technology Edition), 2010,32(4): 353-358.(in Chinese))
[2]	张毅, 俞小莉, 陆国栋, 夏立峰. 进出油管位置影响板翅式油冷器性能的数值模拟[J]. 农业机械学报, 2007,38(2): 153-156, 163.(ZHANG Yi, YU Xiao-li, LU Guo-dong, XIA Li-feng. Numerical simulation the effect of inlet-outlet-tube position on plate-fin oil cooler[J]. Transactions of the Chinese Society for Agricultural Machinery,2007,38(2): 153-156, 163.(in Chinese))
[3]	郭丽华, 覃峰, 陈江平, 陈芝久. 板翅式机油冷却器的性能仿真与优化[J]. 上海交通大学学报, 2006,40(2): 311-315.(GUO Li-hua, QIN Feng, CHEN Jiang-ping, CHEN Zhi-jiu. The performance simulation and optimization on plate fin oil coolers[J]. Journal of Shanghai Jiaotong University,2006,40(2): 311-315.(in Chinese))
[4]	陶文铨. 数值传热学[M]. 西安: 西安交通大学出版社, 1988: 431-439.(TAO Wen-quan. Numerical Heat Transfer[M]. Xi’an: Xi’an Jiaotong University Press, 1988: 431-439.(in Chinese))
[5]	庞威, 徐万毅, 周祥军. 机油冷却器水套的CFD优化改进[J]. 柴油机, 2009,31(2): 34-38.(PANG Wei, XU Wan-yi, ZHOU Xiang-jun. The optimization of oil cooler water jacket by CFD[J]. Diesel Engine,2009,31(2): 34-38.(in Chinese))
[6]	SHEN Li-juan, HU Yan-feng, CHEN Jian-zhong, ZHANG Peng, DAI Hua-zhen. Numerical simulation of the flow field in a dense-media cyclone[J]. Mining Science and Technology,2009,19(2): 225-229.
[7]	Müller-Menzel T, Hecht T. Plate-fin heat exchanger performance reduction in special two-phase flow conditions[J]. Cryogenics,1995,35(5): 297-301.
[8]	秦萌, 陈江平, 陈芝久. 车用发动机机油冷却器流动的数值模拟研究[J]. 车用发动机, 2004,27(3): 23-25.(QIN Meng, CHEN Jiang-ping, CHEN Zhi-jiu. Numerical simulation of automotive engine oil cooler[J].Vehicle Engine,2004,27(3): 23-25.(in Chinese))
[9]	刘巽俊, 陈群, 李骏, 李康, 陈海娥. 车用柴油机冷却系统的CFD分析[J]. 内燃机学报, 2003,21(2): 125-129.(LIU Xun-jun, CHEN Qun, LI Jun, LI Kang, CHEN Hai-e. Automotive diesel engine water jacket CFD analysis[J].Transactions of CSICE,2003,21(2): 125-129.(in Chinese))
[10]	王福军. 计算流体动力学分析——CFD软件原理与应用[M]. 北京: 清华大学出版社, 2004.(WANG Fu-jun. Fluid Dynamics Analysis—Theory and Application of CFD Software[M]. Beijing: Tsinghua University Press, 2004.(in Chinese))
[11]	Carluccio E, Starace G, Ficarella A, Laforgia D. Numerical analysis of a cross-flow compact heat exchange for vehicle applications[J]. Applied Thermal Engineering,2005,25(13): 1995-2013.