板列弯曲振动及功率流分析的辛空间波传播方法

马永彬; 张亚辉; 曾耀祥

doi:10.3879/j.issn.1000-0887.2014.08.002

板列弯曲振动及功率流分析的辛空间波传播方法

doi: 10.3879/j.issn.1000-0887.2014.08.002

¹工业装备结构分析国家重点实验室(大连理工大学),辽宁大连 116024;²北京宇航系统工程研究所, 北京 100076

基金项目: 国家自然科学基金（11172056）；国家重点基础研究发展计划（973计划）（2014CB046803）

详细信息

作者简介:
马永彬（1985—），男，西安人，博士生(E-mail: mayb@mail.dlut.edu.cn);张亚辉（1972—），男，河北昌黎人，教授，博士生导师(通讯作者. E-mail: zhangyh@dlut.edu.cn).

中图分类号: O326
计量
- 文章访问数: 1281
- HTML全文浏览量: 208
- PDF下载量: 764
- 被引次数: 0
出版历程
- 收稿日期: 2014-03-12
- 修回日期: 2014-06-17
- 刊出日期: 2014-08-15

Bending Vibration and Power Flow Analysis of Plate Assemblies in the Symplectic Space

¹State Key Laboratory of Structural Analysis for Industrial Equipment (Dalian University of Technology), Dalian, Liaoning 116024, P.R.China;²Beijing Institute of Astronautical System Engineering, Beijing 100076, P.R.China

Funds: The National Natural Science Foundation of China（11172056）；The National Basic Research Program of China (973 Program)（2014CB046803）

摘要

摘要: 基于波传播理论，在辛空间下研究了由矩形薄板组成的板列结构的自由波属性以及受迫振动问题.通过将薄板弯曲振动控制方程导入辛对偶体系，得到了薄板波传播参数以及各阶波形的辛解析解.根据波在各板之间的传播、反射以及透射关系和叠加原理得到问题的解.给出了辛空间波传播框架下各板动能、应变能以及板间功率流的计算表达式.相比传统波传播方法，该方法具有不受边界条件限制以及能够给出波模态辛解析解的特点.以一个三板组合结构为算例，通过与ABAQUS程序得到的有限元参考解进行对比，验证了所提出方法的高效性与精确性.由于完全基于理性推导，不涉及任何试函数的引入，因此该方法也可推广应用于由其他类型板（如中厚板、层合板等）组合的板列结构动力响应分析问题.
- 辛对偶体系 /
- 组合板列 /
- 功率流
Abstract: The free wave propagation and forced vibration of thin rectangular plate assemblies were investigated with the symplectic method based on wave propagation theory. The governing equations of bending vibration of the thin plates were introduced into the symplectic duality system firstly, then the wave propagation parameters and wave shapes were determined as analytical solution to the symplectic eigenvalue problem. And responses of the thin plates described in physical domain were transformed into wave coordinates. The amplitudes associated with the mode shapes were obtained through solving of the equations involving excitation, scattering and propagation. Superimposition of the wave amplitudes gave the physical responses. Expressions were derived for the mean power flow through the system and mean energy in the plate components. Compared with the traditional wave methods, the provided method is applicable for any combination of classical boundary conditions. The method was applied to the forced vibration of a built-up structure of 3 directly connected thin plates and the results were compared with those from the ABAQUS finite element software. A significant improvement on accuracy and computational efficiency is achieved. As the derivation of the formulae is rigorously rational, the provided method is also applicable for the dynamic analysis of plate assemblies composed of any other types of plates (such as moderately thick plates, and layered plates, etc.).
- symplectic duality system /
- plate assembly /
- power flow

HTML全文

参考文献(22)

[1]	Petyt M. Introduction to Finite Element Vibration Analysis [M]. Cambridge: Cambridge University Press, 2010.
[2]	Lyon R H, DeJong R G. Theory and Application of Statistical Energy Analysis [M]. Boston: Butterworth-Heinemann, 1995.
[3]	Woodhouse J. An introduction to statistical energy analysis of structural vibration[J]. Applied Acoustics,1981,14(6): 455-469.
[4]	Mace B R, Rosenberg J. The SEA of two coupled plates: an investigation into the effects of subsystem irregularity[J]. Journal of Sound and Vibration,1998,212(3): 395-415.
[5]	Silvester P. A general high-order finite-element analysis program waveguide[J]. Microwave Theory and Techniques, IEEE Transactions on,1969,17(4): 204-210.
[6]	Koshiba M, Maruyama S, Hirayama K. A vector finite element method with the high-order mixed-interpolation-type triangular elements for optical waveguiding problems[J]. Journal of Lightwave Technology,1994,12(3): 495-502.
[7]	Langley R S. Application of the dynamic stiffness method to the free and forced vibrations of aircraft panels[J]. Journal of Sound and Vibration,1989,135(2): 319-331.
[8]	Grice R M, Pinnington R J. A method for the vibration analysis of built-up structures—part I: introduction and analytical analysis of the plate-stiffened beam[J]. Journal of Sound and Vibration,2000,230(4): 825-849.
[9]	Wester E C N, Mace B R. Wave component analysis of energy flow in complex structures—part I: a deterministic model[J]. Journal of Sound and Vibration,2005,285(1): 209-227.
[10]	Ladevèze P, Arnaud L, Rouch P, Blanze C. The variational theory of complex rays for the calculation of medium-frequency vibrations[J]. Engineering Computations,2001,18(1/2): 193-214.
[11]	Vanmaele C, Vandepitte D, Desmet W. An efficient wave based prediction technique for plate bending vibrations[J]. Computer Methods in Applied Mechanics and Engineering,2007,196(33): 3178-3189.
[12]	Vergote K, Vanmaele C, Vandepitte D, Desmet W. An efficient wave based approach for the time-harmonic vibration analysis of 3D plate assemblies[J]. Journal of Sound and Vibration,2013,332(8): 1930-1946.
[13]	Mace B R, Duhamel D, Brennan M J, Hinke L. Finite element prediction of wave motion in structural waveguides[J]. Journal of the Acoustical Society of America,2005,117(5): 2835-2843.
[14]	Waki Y, Mace B R, Brennan M J. Numerical issues concerning the wave and finite element method for free and forced vibrations of waveguides[J]. Journal of Sound and Vibration,2009,327(1): 92-108.
[15]	Langley R S. A wave intensity technique for the analysis of high frequency vibrations[J]. Journal of Sound and Vibration,1992,159(3): 483-502.
[16]	Maxit L, Guyader J L. Extension of SEA model to subsystems with non-uniform modal energy distribution[J]. Journal of Sound and Vibration,2003,265(2): 337-358.
[17]	Nefske D J, Sung S H. Power flow finite element analysis of dynamic systems: basic theory and application to beams[J]. Journal of Vibration Acoustics Stress and Reliability in Design,1989,11(1): 94-100.
[18]	Shorter P J, Langley R S. Vibro-acoustic analysis of complex systems[J]. Journal of Sound and Vibration,2005,288(3): 669-699.
[19]	姚伟岸, 钟万勰. 辛弹性力学[M]. 北京: 高等教育出版社, 2002.（YAO Wei-an, ZHONG Wan-xie. Symplectic Elasticity [M]. Beijing: Higher Education Press, 2002. (in Chinese)）
[20]	钟万勰. 应用力学对偶体系[M]. 北京: 科学出版社, 2002.（ZHONG Wan-xie. Duality System in Applied Mechanics [M]. Beijing: Science Press, 2002. (in Chinese)）
[21]	鲍四元, 邓子辰. 环扇形板弯曲问题中环向模拟为时间的辛体系[J]. 西北工业大学学报, 2004,22(6): 734-738.（BAO Si-yuan, DENG Zi-chen. Symplectic solutions of annular sector plate clamped along two circular edges with circumfluent coordinate treated as “time”[J]. Journal of Northwestern Polytechnical University,2004,22(6): 734-738.（in Chinese））
[22]	钟阳, 李锐, 田斌. 矩形中厚板自由振动问题的哈密顿体系与辛几何解法[J]. 动力学与控制学报, 2009,7(4): 302-307.（ZHONG Yang, LI Rui, TIAN Bin. On Hamilton system and new symplectic approach for free vibration of moderately thick rectangular plates[J]. Journal of Dynamics and Control,2009,7(4): 302-307.(in Chinese)）

施引文献

资源附件(0)

访问统计

计量

文章访问数: 1281
HTML全文浏览量: 208
PDF下载量: 764
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

板列弯曲振动及功率流分析的辛空间波传播方法

doi: 10.3879/j.issn.1000-0887.2014.08.002

作者简介:
马永彬（1985—），男，西安人，博士生(E-mail: mayb@mail.dlut.edu.cn);张亚辉（1972—），男，河北昌黎人，教授，博士生导师(通讯作者. E-mail: zhangyh@dlut.edu.cn).

计量

Bending Vibration and Power Flow Analysis of Plate Assemblies in the Symplectic Space

计量

目录

留言板

板列弯曲振动及功率流分析的辛空间波传播方法

doi: 10.3879/j.issn.1000-0887.2014.08.002

作者简介: 马永彬（1985—），男，西安人，博士生(E-mail: mayb@mail.dlut.edu.cn);张亚辉（1972—），男，河北昌黎人，教授，博士生导师(通讯作者. E-mail: zhangyh@dlut.edu.cn).

计量

出版历程

Bending Vibration and Power Flow Analysis of Plate Assemblies in the Symplectic Space

计量

出版历程

目录

作者简介:
马永彬（1985—），男，西安人，博士生(E-mail: mayb@mail.dlut.edu.cn);张亚辉（1972—），男，河北昌黎人，教授，博士生导师(通讯作者. E-mail: zhangyh@dlut.edu.cn).