A Constitutive Description of Cyclic Pseudoelasticity for the NiTi SMAs Involving Coupled Phase Transformation and Plasticity
-
摘要: 结合NiTi形状记忆合金单轴循环变形试验研究结果,采用基于混合物理论的计及相变、重取向与塑性变形的形状记忆合金本构模型发展了相应的算法和程序.对NiTi形状记忆合金单轴循环变形行为进行了描述.通过试验结果与模拟结果的比较,验证了本构模型与算法的有效性.
-
关键词:
- 形状记忆合金 /
- 循环伪弹性-塑性变形 /
- 本构模型 /
- 数值方法 /
- 验证
Abstract: According to the main experimental constitutive characteristics of the NiTi shape memory alloys (SMAs) subjected to cyclic tensile loading, and in line with the constitutive relationship for the SMAs, an analytical approach and the corresponding numerical algorithm as well as the computational program were developed. The constitutive description is based on the mixture theory, employs the Voigt hypothesis, and takes into account the effects of forward and inverse martensitic transformation, reorientation deformation and plastic deformation. The pseudoelastic behavior of a NiTi SMA subjected to cyclic tensile loading and unloading was simulated. The comparison between the computed and experimental results shows that the main characteristics of the material under cyclic loading can be satisfactorily described, which demonstrates the validity of the constitutive model and the developed numerical program. -
[1] Delville R, Malard B, Pilch J, Sittner P. Transmission electron microscopy investigation of dislocation slip during superelastic cycling of Ni-Ti wires[J].International Journal of Plasticity,2011,27(2): 282-297. [2] Jiang H J, Cao S, Ke C B, Ma X. Fine-grained bulk NiTi shape memory alloy fabricated by rapid solidification process and its mechanical properties and damping performance[J].Journal of Materiak Science Technology,2013,29(9): 855-862. [3] Morgan N B. Medical shape memory alloy applications: the market and its products[J].Materials Science and Engineeing A,2004,378(1/2): 134-148. [4] Auricchio F, Reali A, Stefanelli U. A three-dimensional model describing stress-induced solid phase transformation with permanent inelasticity[J].International Journal of Plasticity,2007,23(2): 207-226. [5] Kan Q H, Kang G Z. Constitutive model for uniaxial transformation ratchetting of super-elastic NiTi shape memory alloy at room temperature[J].International Journal of Plasticity,2010,26(3): 441-465. [6] Morin C, Moumni Z, Zaki W. Thermomechanical coupling in shape memory alloys under cyclic loadings: experimental analysis and constitutive modeling[J].International Journal of Plasticity,2011,27(12): 1959-1980. [7] 康国政. 伪弹性镍钛形状记忆合金循环变形行为的研究进展[J].西南交通大学学报,2011,46(3): 355-364.(KANG Guo-zheng. Research progress in cyclic deformation of super-elastic NiTi shape memory alloy[J].Journal of Southwest Jiaotong University,2011,46(3): 355-364.(in Chinese)) [8] Wang X M, Xu B X, Yue Z F. Phase transformation behavior of pseudoelastic NiTi shape memory alloys under large strain[J].Alloys and Compounds,2008,463(1/2): 417-422. [9] Peng X, Chen B, Chen X, Wang J. A Constitutive model for transformation, reorientation and plastic deformation of Shape Memory Alloys[J].Acta Mechanica Solida Sinica,2012,25(3): 285-298. [10] Peng X, Yang Y, Huang S. A comprehensive description for shape memory alloys with a two-phase constitutive model[J].International Journal Solids Structures,2001,38(38/39): 6925-6940. [11] Tanaka K. Thermal mechanical sketch of shape memory effect: one-dimensional tensile behavior[J].Res Mech,1986,18: 251-263. [12] Miyazaki S, Imai T, Igo Y, Otsika K. Effect of cyclic deformation on the pseudoelasticity characteristics of Ti-Ni alloys[J].Metallurgical and Materials Transactions A,1986,17(1): 115-120. [13] Moumni Z, Herpen Van A, Riberty P. Fatigue analysis of shape memory alloys: energy approach[J].Smart Mater Struct,2005,14(287): 287-292. [14] Zaki W, Moumni Z. A 3D model of the cyclic thermomechanical behavior of shape memory alloys[J].Journal of the Mechanics and Physics of Solids,2007,55(11): 2427-2454.
点击查看大图
计量
- 文章访问数: 1263
- HTML全文浏览量: 118
- PDF下载量: 791
- 被引次数: 0