薄球壳在均布外压与温度耦合作用下的热屈曲研究

李忱; 田雪坤; 王海任; 苗亚男

doi:10.3879/j.issn.1000-0887.2015.09.004

薄球壳在均布外压与温度耦合作用下的热屈曲研究

doi: 10.3879/j.issn.1000-0887.2015.09.004

太原科技大学应用科学学院, 太原 030024

基金项目: 国家自然科学基金（11372207）;山西省自然科学基金（2013011005-4）

详细信息

作者简介:
李忱（1959—），男，浙江人，教授，博士，硕士生导师(通讯作者. E-mail: tydz_lc@126.com).

中图分类号: O343.6
计量
- 文章访问数: 1061
- HTML全文浏览量: 40
- PDF下载量: 737
- 被引次数: 0
出版历程
- 收稿日期: 2015-05-14
- 修回日期: 2015-06-25
- 刊出日期: 2015-09-15

Thermal Buckling of Thin Spherical Shells Under Interaction of Uniform External Pressure and Uniform Temperature

College of Applied Science, Taiyuan University of Science and Technology, Taiyuan, Shanxi 030024, P.R.China

Funds: The National Natural Science Foundation of China(11372207)

摘要

摘要: 从张量方法推导出的轴对称薄球壳屈曲方程出发，推导出在均布外压与温度耦合作用下用位移表示的薄球壳热屈曲方程；应用虚功原理建立薄球壳屈曲最小势能泛函；进一步用Ritz(里兹)法分析了周边简支的半球壳的3种热屈曲问题.得到了: 1) 温度不超过屈曲临界温度值时，均布外压的临界载荷；2) 均布外压载荷为0时，屈曲临界温度值；3) 均布外压载荷不超过临界载荷时，屈曲临界温度值.
- 张量 /
- 热屈曲 /
- 薄球壳 /
- Ritz法 /
- 临界载荷 /
- 临界温度
Abstract: The thermal buckling equation for thin spherical shells was deduced on the basis of axisymmetric thin spherical shell buckling equation derived with the tensor method. The thermal buckling equation involving the coupling of uniform external pressure and temperature was expressed in terms of displacement. The thin spherical shell buckling of minimum potential energy functional was also established according to the virtual work principle. 3 thermal buckling problems for simply supported hemispherical shells were analyzed with the Ritz method. The following 3 conclusions are drawn: 1) The critical value of uniform external pressure on condition that the temperature does not exceed the critical buckling level. 2) The buckling critical temperature value on condition that the uniform external pressure is 0. 3) The buckling critical temperature value on condition that the uniform external pressure does not exceed the critical level.
- tensor /
- thermal buckling /
- thin spherical shell /
- Ritz method /
- critical load /
- critical temperature

HTML全文

参考文献(16)

[1]	Abir D, Nardo S V. Thermal buckling of circular cylindrical shells under circumferential temperature gradients[J]. Journal of the Aerospace Sciences,1959,26(12): 803-808.
[2]	Mahayni M A. Thermal buckling of shallow shells[J]. International Journal of Solids and Structures,1966,2(2): 167-180.
[3]	Chang L K, Card M F. Thermal buckling in stiffened cylindrical shells[C]//Structural Dynamics, and Materials Conference. New York, 1970, AAIA: 260-272.
[4]	Chang L K, Card M F. Thermal buckling analysis for stiffened orthotropic cylindrical shells[P]. American: NASA-TN-D-6332, L-7021, 1971-4-1.
[5]	Gupta Sd, Wang I. Thermal buckling of orthotropic cylindrical shells[J]. Fibre Science and Technology,1973,6(1): 39-45.
[6]	Shen H S. Thermal postbucking behavior of functionally graded cylindrical shells with temperature-dependent properties[J]. International Journal of Solids and Structures,2004,41(4): 1961-1974.
[7]	Wu L, Jiang Z Q, Liu J. Thermoelastic stability of functionally graded cylindrical shells[J]. Composite Structures,2005,70(1): 60-68.
[8]	Shahsiah R, Eslami M R. Thermal buckling of functionally graded cylindrical shell[J]. Journal of Thermal Stresses,2003,26(3): 277-294.
[9]	Naj R, Sabzikar Boroujerdy M S, Eslami M R. Thermal and mechanical instability of functionally graded trucated conical shells[J]. Thin-Walled Structures,2008,46(1): 65-78.
[10]	Hafezalkotob A, Eslami M R. Thermomechanical buckling of simply supported shallow FGM spherical shells with temperature-dependent material[J]. Iranian Journal of Mechanical Engineering,2010,11(2): 39-65.
[11]	Sabzikar Boroujerdy M, Eslami M R. Thermal buckling of piezo-FGM shallow spherical shells[J]. Meccanica,2013,48(4): 887-899.
[12]	Anh V T T, Bich D H, Duc N D. Nonlinear stability analysis of thin FGM annular spherical shells on elastic foundations under external pressure and thermal loads[J]. European Journal of Mechanics-A/Solid,2015,50: 28-38.
[13]	韩强, 黄小清, 宁建国. 高等板壳理论[M]. 北京: 科学出版社, 2002: 57-60.(HAN Qiang, HUANG Xiao-qing, NING Jian-guo. Theory of Higher Plate and Shell [M]. Beijing: Science Press, 1985: 57-60.(in Chinese))
[14]	赵丽, 李忱. 非线性各向同性弹性材料热应力本构方程[J]. 应用数学和力学, 2013,34(2): 183-189.(ZHAO Li, LI Chen. Thermal stress constitutive equations of non-linear isotropic elastic material[J]. Applied Mathematics and Mechanics,2013,34(2): 183-189.(in Chinese))
[15]	李忱, 黄执中. 任意形状薄壳的弹性稳定性方程[J]. 上海力学, 1993,14(3): 74-81.(LI Chen, HUANG Zhi-zhong. A set of general equations of elastic stability for thin shells with arbitrary shapes[J]. Shanghai Journal of Mechanics,1993,14(3): 74-81.(in Chinese))
[16]	铁摩辛柯S P, 盖莱J M. 弹性稳定理论[M]. 张福范, 译. 北京: 科学出版社, 1965: 551.(Timoshenko S P, Gere J M. The Theory of Elastic Stability [M]. ZHANG Fu-fan, transla. Beijing: Science Press, 1965: 551.(Chinese version))