BU Wankui, XU Hui, ZHAO Yucheng. Analysis on Deformation and Stress of Bending Stratum Based on the Elastic Theory for Curved Beams[J]. Applied Mathematics and Mechanics, 2020, 41(3): 302-318. doi: 10.21656/1000-0887.400081
Citation: BU Wankui, XU Hui, ZHAO Yucheng. Analysis on Deformation and Stress of Bending Stratum Based on the Elastic Theory for Curved Beams[J]. Applied Mathematics and Mechanics, 2020, 41(3): 302-318. doi: 10.21656/1000-0887.400081

Analysis on Deformation and Stress of Bending Stratum Based on the Elastic Theory for Curved Beams

doi: 10.21656/1000-0887.400081
Funds:  The National Natural Science Foundation of China(General Program)(51574228)
  • Received Date: 2019-03-01
  • Rev Recd Date: 2019-04-02
  • Publish Date: 2020-03-01
  • A displacement function suitable for plane curved beams in polar coordinates was introduced, and the partial differential governing equation for plane curved beams was obtained through theoretical analysis. Then, the displacement components and stress components were formulated with the displacement function. On this basis, the finite difference schemes of the partial differential governing equation, the displacement components and the stress components for the curved beam in polar coordinates were presented. Finally, these theoretical formulas were applied to analyze the displacement and stress distributions of the bending stratum. The results indicate that: 1) The bending stratum sinks down after excavation of the coal seam, and there are both tension and compression in the circumferential direction. 2) The radial stress reaches a peak value not far from the openoff cut and increases gradually from the inner surface to the outer surface along the radial direction; the circumferential stress reaches the peak value not far behind the working face and may cause circumferential compressive fracture in the bending stratum; the shear stress reaches the peak value not far from the openoff cut and increases from the inner surface to the outer surface along the radial direction for smallangle sections. The work provides a scientific basis and reference for coal mining engineering.
  • loading
  • [1]
    虎维岳, 何满潮. 深部煤炭资源及开发地质条件研究现状与发展趋势[M]. 北京: 煤炭工业出版社, 2008.(HU Weiyue, HE Manchao. The Present Situation and Development Trend for Deep Coal Resources and the Development of Geological Conditions [M]. Beijing: Coal Industry Publishing House, 2008.(in Chinese))
    [2]
    何满朝, 钱七虎. 深部岩体力学基础[M]. 北京: 科学出版社, 2010.(HE Manchao, QIAN Qihu. Mechanical Foundation for Deep Rock Mass [M]. Beijing: Science Press, 2010.(in Chinese))
    [3]
    ODEN J T, RIPPERGER E A. Mechanics of Elastic Structures [M]. 2nd ed. New York: McGraw-Hill Book Company, 1981.
    [4]
    TIMOSHENKO S P, GOODIER J N. Theory of Elasticity [M]. New York: McGraw-Hill Book Company, 1979.
    [5]
    CHIANESE R B, ERDLAC R J. The general solution to the distribution of stresses in a circular ring compressed by two forces acting along a diameter[J]. The Quarterly Journal of Mechanics and Applied Mathematics,1988,41(2): 239-247.
    [6]
    BAGCI C. A new unified strength of materials solution for stresses in curved beams and rings[J]. Journal of Mechanical Design,1992,114(2): 231-237.
    [7]
    BAGCI C. Exact elasticity solutions for stresses and deflections in curved beams and rings of exponential and T-sections[J]. Journal of Mechanical Design,1993,115(3): 346-358.
    [8]
    COOK R D. Circumferential stress in curved beams[J]. Journal of Aplied Mechanics,1992,59(1): 224-225.
    [9]
    TUTUNCU N. Plane stress analysis of end-loaded orthotropic curved beams of constant thickness with applications to full rings[J]. Journal of Mechanical Design,1998,120(2): 368-374.
    [10]
    SLOBODA A, HONARMANDI P. Generalized elasticity method for curved beam stress analysis: analytical and numerical comparison for a lifting hook[J]. Mechanics Based Design of Structures and Machines,2007,35(3): 319-332.
    [11]
    钟万勰, 徐新生, 张洪武. 弹性曲梁问题的直接法[J]. 工程力学, 1996,13(4): 1-8.(ZHONG Wanxie, XU Xinsheng, ZHANG Hongwu. On a direct method for the problem of elastic curved beams[J]. Engineering Mechanics,1996,13(4): 1-8.(in Chinese))
    [12]
    李锐, 田宇, 郑新然, 等. 求解弹性地基上自由矩形中厚板弯曲问题的辛-叠加方法[J]. 应用数学和力学, 2018,〖STHZ〗 39(8): 875-891.(LI Rui, TIAN Yu, ZHENG Xinran, et al. A symplectic superposition method for bending problems of free-edge rectangular thick plates resting on elastic foundations[J]. Applied Mathematics and Mechanics,2018,39(8): 875-891.(in Chinese))
    [13]
    侯永康, 段树金, 安蕊梅. 满足断裂过程区裂纹张开位移条件应力函数的半解析解法[J]. 应用数学和力学, 2018,39(8): 979-988.(HOU Yongkang, DUAN Shujin, AN Ruimei. A semi-analytical method for stress functions meeting crack opening displacements in fracture process zones[J]. Applied Mathematics and Mechanics,2018,39(8): 979-988.(in Chinese))
    [14]
    DURELLI A J, RANGANAYAKAMMA B. Parametric solution of stresses in beams[J]. Journal of Engineering Mechanics,1989,115(2): 401-415.
    [15]
    AHMED S R, IDRIS A B M, UDDIN M W. Numerical solution of both ends fixed deep beams[J]. Computers & Structures,1996,61(1): 21-29.
    [16]
    AHMED S R, KHAN M R, ISLAM K M S, et al. Investigation of stresses at the fixed end of deep cantilever beams[J]. Computers & Structures,1998,69(3): 329-338.
    [17]
    姚晓东, 张元海. 基于抽象翘曲位移函数的箱形梁剪力滞效应分析[J]. 应用数学和力学, 2018,39(12): 1351-1363.(YAO Xiaodong, ZHANG Yuanhai. Analysis of shear lag effects in box girders based on abstract warping displacement functions[J]. Applied Mathematics and Mechanics,2018,39(12): 1351-1363.(in Chinese))
    [18]
    COOK R D. Axisymmetric finite element analysis for pure moment loading of curved beams and pipe bends[J]. Computers & Structures,1989,33(2): 483-487.
    [19]
    RATTANAWANGCHAROEN N, BAI H, SHAH A H. A 3D cylindrical finite element model for thick curved beam stress analysis[J]. International Journal for Numerical Methods in Engineering,2004,59(4): 511-531.
    [20]
    RICHARDS T H, DANIELS M J. Enhancing finite element surface stress predictions: a semi-analytic technique for axisymmetric solids[J]. The Journal of Strain Analysis for Engineering Design,1987,22(2): 75-86.
    [21]
    SMART J. On the determination of boundary stresses in finite elements[J]. The Journal of Strain Analysis for Engineering Design,1987,〖STHZ〗 22(2): 87-96.
    [22]
    GANGAN P. The curved beam/deep arch/finite ring element revisited[J]. International Journal for Numerical Methods in Engineering,1985,21(3): 389-407.
    [23]
    DOW J O, JONES M S, HARWOOD S A. A new approach to boundary modeling for finite difference applications in solid mechanics[J]. International Journal for Numerical Methods in Engineering,1990,30(1): 99-113.
    [24]
    RANZI G, GARA F, LEONI G, et al. Analysis of composite beams with partial shear interaction using available modelling techniques: a comparative study[J]. Computers & Structures,2006,84(13/14): 930-941.
    [25]
    AHMED S R, NATH S K D, UDDIN M W. Optimum shapes of tire-treads for avoiding lateral slippage between tires and roads[J]. International Journal for Numerical Methods in Engineering,2005,64(6): 729-750.
    [26]
    AHMED S R, HOSSAIN M Z, UDDIN M W. A general mathematical formulation for finite-difference solution of mixed-boundary-value problems of anisotropic materials[J]. Computers & Structures,2005,83(1): 35-51.
    [27]
    HOSSAIN M Z, AHMED S R, UDDIN M W. Generalized mathematical model for the solution of mixed-boundary-value elastic problems[J]. Applied Mathematics and Computation,2005,169(2): 1247-1275.
    [28]
    XU W, LI G. Finite difference three-dimensional solution of stresses in adhesively bonded composite tubular joint subjected to torsion[J]. International Journal of Adhesion and Adhesives,2010,30(4): 191-199.
    [29]
    NATH S K D, AHMED S R. A displacement potential-based numerical solution for orthotropic composite panels under end moment and shear loading[J]. Journal of Mechanics of Materials and Structures,2009,4(6): 987-1004.
    [30]
    MCCORQUODALE P, COLELLA P, GROTE D P, et al. A node-centered local refinement algorithm for Poisson’s equation in complex geometries[J]. Journal of Computational Physics,2004,201(1): 34-60.
    [31]
    DING H, SHU C. A stencil adaptive algorithm for finite difference solution of incompressible viscous flows[J]. Journal of Computational Physics,2006,214(1): 397-420.
    [32]
    MIN C, GIBOU F, CENICEROS H D. A supra-convergent finite difference scheme for the variable coefficient Poisson equation on non-graded grids[J]. Journal of Computational Physics,2006,218(1): 123-140.
    [33]
    BIENIASZ L K. Experiments with a local adaptive grid h -refinement for the finite-difference solution of BVPs in singularly perturbed second-order ODEs[J]. Applied Mathematics and Computation,2008,195(1): 196-219.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (938) PDF downloads(285) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return