Volume 43 Issue 6
Jun.  2022
Turn off MathJax
Article Contents
ZHANG Dongdong, LUAN Fuqiang, ZHAO Lihui, ZHENG Ling. Research on Topology Optimization of Damping Material Microstructures With Varied Volume Constraints[J]. Applied Mathematics and Mechanics, 2022, 43(6): 648-659. doi: 10.21656/1000-0887.420206
Citation: ZHANG Dongdong, LUAN Fuqiang, ZHAO Lihui, ZHENG Ling. Research on Topology Optimization of Damping Material Microstructures With Varied Volume Constraints[J]. Applied Mathematics and Mechanics, 2022, 43(6): 648-659. doi: 10.21656/1000-0887.420206

Research on Topology Optimization of Damping Material Microstructures With Varied Volume Constraints

doi: 10.21656/1000-0887.420206
  • Received Date: 2021-07-06
  • Rev Recd Date: 2021-11-27
  • Available Online: 2022-05-26
  • Publish Date: 2022-06-30
  • The vibration suppression performance of a damping composite structure depends on the material layout and the damping material properties. A topology optimization method was proposed for damping material microstructures with varied volume constraints, to obtain the damping material microstructure with desired properties under the smallest material consumption. Based on the homogenization method, a 3D finite element model for the damping material was established, and the effective elastic matrix of the damping material was formulated. The Hashin-Shtrikman bounds theory was used inversely to estimate the volume fraction bound of the damping material corresponding to the desired effective modulus, and a movement criterion for volume constraint bounds of damping materials was constructed. Then the optimization problem of achieving the desired properties of damping materials with microstructures was converted to another problem of maximizing the desired modulus under volume constraints, and a topology optimization model for the damping material microstructure was established. The optimality criteria method was employed to update the design variables, and the optimized topology configurations of damping material microstructures were obtained. The feasibility and effectiveness of the proposed method were verified with several numerical examples, and the influences of the initial configurations, the mesh density and Young’s modulus on the microstructure configurations of the damping material were also discussed.

  • loading
  • [1]
    曾昭阳, 范红伟, 焦映厚, 等. 基于三明治夹层约束阻尼结构的潜艇降噪[J]. 科学技术与工程, 2020, 20(22): 8975-8982. (ZENG Zhaoyang, FANG Hongwei, JIAO Yinghou, et al. Noise reduction of submarine based on sandwich constrained layer damping structure[J]. Science Technology and Engineering, 2020, 20(22): 8975-8982.(in Chinese) doi: 10.3969/j.issn.1671-1815.2020.22.018

    ZENG Zhaoyang, FANG Hongwei, JIAO Yinghou, et al. Noise reduction of submarine based on sandwich constrained layer damping structure[J]. Science Technology and Engineering, 2020, 20(22): 8975-8982. (in Chinese)) doi: 10.3969/j.issn.1671-1815.2020.22.018
    [2]
    ANSARI M, KHAJEPOUR A, ESMAILZADEH E. Application of level set method to optimal vibration control of plate structures[J]. Journal of Sound and Vibration, 2013, 332(4): 687-700. doi: 10.1016/j.jsv.2012.09.006
    [3]
    FANG Z P, ZHENG L. Topology optimization for minimizing the resonant response of plates with constrained layer damping treatment[J]. Shock and Vibration, 2015, 2015(2): 1-11.
    [4]
    PANG J, ZHENG W G, YANG L, et al. Topology optimization of free damping treatments on plates using level set method[J]. Shock and Vibration, 2020, 2020: 5084167.
    [5]
    CHEN W J, LIU S T. Topology optimization of microstructures of viscoelastic damping materials for a prescribed shear modulus[J]. Structural and Multidisciplinary Optimization, 2014, 50(2): 287-296. doi: 10.1007/s00158-014-1049-3
    [6]
    YANG R Z, DU J B. Microstructural topology optimization with respect to sound power radiation[J]. Structural and Multidisciplinary Optimization, 2013, 47(2): 191-206. doi: 10.1007/s00158-012-0838-9
    [7]
    CHEN W J, LIU S T. Microstructural topology optimization of viscoelastic materials for maximum modal loss factor of macrostructures[J]. Structural and Multidisciplinary Optimization, 2016, 53(1): 1-14. doi: 10.1007/s00158-015-1305-1
    [8]
    FANG Z P, LEI Y, TIAN S X, et al. Microstructural topology optimization of constrained layer damping on plates for maximum modal loss factor of macrostructures[J]. Shock and Vibration, 2020, 2020: 8837610.
    [9]
    ANDREASEN C S, ANDREASSEN E, JENSEN J S, et al. On the realization of the bulk modulus bounds for two-phase viscoelastic composites[J]. Journal of the Mechanics and Physics of Solids, 2014, 63(1): 228-241.
    [10]
    HUANG X D, ZHOU S W, SUN G Y, et al. Topology optimization for microstructures of viscoelastic composite materials[J]. Computer Methods in Applied Mechanics and Engineering, 2015, 283: 503-516. doi: 10.1016/j.cma.2014.10.007
    [11]
    HASHIN Z, SHTRIKMAN S. A variational approach to the theory of the elastic behaviour of multiphase materials[J]. Journal of the Mechanics and Physics of Solids, 1963, 11(2): 127-140. doi: 10.1016/0022-5096(63)90060-7
    [12]
    HASHIN Z. Complex moduli of viscoelastic composites, Ⅰ: general theory and application to particulate composites[J]. International Journal of Solids and Structures, 1970, 6(5): 539-552. doi: 10.1016/0020-7683(70)90029-6
    [13]
    杨大鹏, 刘新田. 复合材料有效弹性模量的上、下限的求解[J]. 郑州大学学报(工学版), 2002, 23(2): 106-109. (YANG Dapeng, LIU Xintian. Solution to the upper and lower bounds of the effective elastic modulus of composite materials[J]. Journal of Zhengzhou University (Engineering Edition), 2002, 23(2): 106-109.(in Chinese)

    YANG Dapeng, LIU Xintian. Solution to the upper and lower bounds of the effective elastic modulus of composite materials[J]. Journal of Zhengzhou University (Engineering Edition), 2002, 23(2): 106-109. (in Chinese))
    [14]
    LIU Q M, RUAN D, HUANG X. Topology optimization of viscoelastic materials on damping and frequency of macrostructures[J]. Computer Methods in Applied Mechanics and Engineering, 2018, 337: 305-323. doi: 10.1016/j.cma.2018.03.044
    [15]
    程可朋, 王宪杰, 张洵安, 等. 周期性复合材料构型及结构一体化优化[J]. 应用数学和力学, 2015, 36(7): 725-732. (CHENG Kepeng, WANG Xianjie, ZHANG Xun’an, et al. Collaborative optimization of structures with periodic composite materials[J]. Applied Mathematics and Mechanics, 2015, 36(7): 725-732.(in Chinese) doi: 10.3879/j.issn.1000-0887.2015.07.005

    CHENG Kepeng, WANG Xianjie, ZHANG Xunan, et al. Collaborative optimization of structures with periodic composite materials[J]. Applied Mathematics and Mechanics, 2015, 36(7): 725-732. (in Chinese)) doi: 10.3879/j.issn.1000-0887.2015.07.005
    [16]
    SIGMUND O. Materials with prescribed constitutive parameters: an inverse homogenization problem[J]. International Journal of Solids and Structures, 1994, 31(17): 2313-2329. doi: 10.1016/0020-7683(94)90154-6
    [17]
    XIA L, BREITKOPF P. Design of materials using topology optimization and energy-based homogenization approach in Matlab[J]. Structural and Multidisciplinary Optimization, 2015, 52(6): 1229-1241. doi: 10.1007/s00158-015-1294-0
    [18]
    GAO J, LI H, GAO L, et al. Topological shape optimization of 3D micro-structured materials using energy-based homogenization method[J]. Advances in Engineering Software, 2018, 116: 89-102. doi: 10.1016/j.advengsoft.2017.12.002
    [19]
    SIGMUND O. Morphology-based black and white filters for topology optimization[J]. Structural and Multidisciplinary Optimization, 2007, 33(4): 401-424.
    [20]
    ZHANG D D, WU Y H, LU X, et al. Topology optimization of constrained layer damping plates with frequency- and temperature-dependent viscoelastic core via parametric level set method[J]. Mechanics of Advanced Materials and Structures, 2021, 29(1): 154-170.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(11)

    Article Metrics

    Article views (356) PDF downloads(51) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return