Impact Responses of Prismatic Lithium-Ion Battery Based on the Membrane Factor Method

ZHANG Xinchun; WANG Junyu; WANG Yulin; HUANG Zixuan; WANG Kai; QIN Jiangyi

doi:10.21656/1000-0887.430289

Volume 43 Issue 11

Nov. 2022

Turn off MathJax

Article Contents

Article Navigation > Applied Mathematics and Mechanics > 2022 > 43(11): 1203-1213

ZHANG Xinchun, WANG Junyu, WANG Yulin, HUANG Zixuan, WANG Kai, QIN Jiangyi. Impact Responses of Prismatic Lithium-Ion Battery Based on the Membrane Factor Method[J]. Applied Mathematics and Mechanics, 2022, 43(11): 1203-1213. doi: 10.21656/1000-0887.430289

Citation:

PDF( 3466 KB)

Impact Responses of Prismatic Lithium-Ion Battery Based on the Membrane Factor Method

doi: 10.21656/1000-0887.430289

1.
Hebei Key Laboratory of Electric Machinery Health Maintenance & Failure Prevention, North China Electric Power University, Baoding, Hebei 071003, P.R.China
2.
Unmanned Systems Research Center, National Innovation Institute of Defense Technology, Academy of Military Sciences, Beijing 100010, P.R.China

Received Date: 2022-09-19
Rev Recd Date: 2022-11-06

Available Online: 2022-11-14

Publish Date: 2022-11-30

Abstract

Abstract

Aimed at the internal short circuit problem due to large deformation of the prismatic lithium-ion battery cell under impact loadings, a simplified battery model was first established. Then the motion equations of velocity and displacement based on the membrane factor method were proposed. With the effects of the face-sheet thickness and the densification region on the normalized final deflection, impact response characteristics of prismatic battery cells were investigated in detail. The results show that, the improved motion equations involving the membrane factor can reflect the dynamic response mechanisms of the prismatic battery cell under impact loadings, and the large deflection under high-speed impact can be predicted. With the increase of the face-sheet thickness, the deflection of the battery cell’s lower part decreases obviously. However, the densification region expands with the face-sheet thickness. The deflection and the densification region of the cell’s lower part both increase with the inner core density of the battery. This proposed impact model provides a theoretical guidance for the multi-functional integrated dynamic design of prismatic battery cells.
- prismatic lithium-ion battery,
- impact response,
- membrane factor method,
- motion equation

FullText(HTML)

References(22)

References

[1]	BAI J L, WANG Z R, GAO T F, et al. Effect of mechanical extrusion force on thermal runaway of lithium-ion batteries caused by flat heating[J]. Journal of Power Sources, 2021, 507: 230305. doi: 10.1016/j.jpowsour.2021.230305
[2]	赖铱麟, 杨凯, 刘皓, 等. 锂离子电池安全预警方法综述[J]. 储能科学与技术, 2020, 9(6): 1926-1932 doi: 10.19799/j.cnki.2095-4239.2020.0158 LAI Yilin, YANG Kai, LIU Hao, et al. Lithium-ion battery safety warning methods review[J]. Energy Storage Science and Technology, 2020, 9(6): 1926-1932.(in Chinese) doi: 10.19799/j.cnki.2095-4239.2020.0158
[3]	朱伟杰, 董缇, 张树宏. 储能系统锂离子电池国内外安全标准对比分析[J]. 储能科学与技术, 2020, 9(5): 279-286 doi: 10.19799/j.cnki.2095-4239.2019.0199 ZHU Weijie, DONG Ti, ZHANG Shuhong. Comparative analysis of domestic and foreign safety standards for lithium-ion batteries for energy storage system[J]. Energy Storage Science and Technology, 2020, 9(5): 279-286.(in Chinese) doi: 10.19799/j.cnki.2095-4239.2019.0199
[4]	YIN H F, MA S, LI H G, et al. Modeling strategy for progressive failure prediction in lithium-ion batteries under mechanical abuse[J]. eTransportation, 2020, 7(2): 100098.
[5]	SHEIKH M, ELMARAKBI A, REHMAN S. A combined experimental and simulation approach for short circuit prediction of 18650 lithium-ion battery under mechanical abuse conditions[J]. Journal of Energy Storage, 2020, 32: 101833. doi: 10.1016/j.est.2020.101833
[6]	兰凤崇, 郑文杰, 李志杰, 等. 车用动力电池的挤压载荷变形响应及内部短路失效分析[J]. 华南理工大学学报(自然科学版), 2018, 46(6): 65-72 LAN Fengchong, ZHENG Wenjie, LI Zhijie, et al. Compression load-deformation response and internal short circuit failure analysis of vehicle powered batteries[J]. Journal of South China University of Technology (Natural Science Edition), 2018, 46(6): 65-72.(in Chinese)
[7]	XI S J, ZHAO Q C, CHANG L J, et al. The dynamic failure mechanism of a lithium-ion battery at different impact velocity[J]. Engineering Failure Analysis, 2020, 116: 104747. doi: 10.1016/j.engfailanal.2020.104747
[8]	MO F H, TIAN Y, ZHAO S Q, et al. Working temperature effects on mechanical integrity of cylindrical lithium-ion batteries[J]. Engineering Failure Analysis, 2022, 137: 106399. doi: 10.1016/j.engfailanal.2022.106399
[9]	XU J, LIU B H, HU D Y. State of charge dependent mechanical integrity behavior of 18650 lithium-ion batteries[J]. Scientific Reports, 2016, 6: 21829. doi: 10.1038/srep21829
[10]	CHEN Y Y, SANTHANAGOPALAN S, BABU V, et al. Dynamic mechanical behavior of lithium-ion pouch cells subjected to high-velocity impact[J]. Composite Structures, 2019, 218: 50-59. doi: 10.1016/j.compstruct.2019.03.046
[11]	CHUNG S H, TANCOGNE-DEJEAN T, ZHU J, et al. Failure in lithium-ion batteries under transverse indentation loading[J]. Journal of Power Sources, 2018, 389: 148-159. doi: 10.1016/j.jpowsour.2018.04.003
[12]	李梦, 柳小伟, 张舒, 等. 轴向压缩下圆柱形动力锂离子电池的性能[J]. 高压物理学报, 2021, 35(3): 179-186 doi: 10.11858/gywlxb.20200647 LI Meng, LIU Xiaowei, ZHANG Shu, et al. Performance of cylindrical power lithium-ion battery under axial compression[J]. Chinese Journal of High Pressure Physics, 2021, 35(3): 179-186.(in Chinese) doi: 10.11858/gywlxb.20200647
[13]	董思捷, 张新春, 汪玉林, 等. 不同挤压载荷下圆柱形锂离子电池的失效机理试验研究[J]. 中国机械工程, 2022, 33(8): 915-920, 951 doi: 10.3969/j.issn.1004-132X.2022.08.005 DONG Sijie, ZHANG Xinchun, WANG Yulin, et al. Experimental study on the failure mechanism of cylindrical lithium-ion battery under different compression loadings[J]. China Mechanical Engineering, 2022, 33(8): 915-920, 951.(in Chinese) doi: 10.3969/j.issn.1004-132X.2022.08.005
[14]	YU T X, CHEN F L. The large deflection dynamic plastic response of rectangular plates[J]. International Journal of Impact Engineering, 1992, 12(4): 605-616. doi: 10.1016/0734-743X(92)90261-Q
[15]	QIN Q H, WANG T J, ZHAO S Z. Large deflections of metallic sandwich and monolithic beams under locally impulsive loading[J]. International Journal of Mechanical Sciences, 2009, 51(11): 752-773.
[16]	QIN Q H, WANG T J. A theoretical analysis of the dynamic response of metallic sandwich beam under impulsive loading[J]. European Journal of Mechanics A: Solids, 2009, 28(5): 1014-1025. doi: 10.1016/j.euromechsol.2009.04.002
[17]	JIANG W Z, LIU Y, WANG B. Dynamic responses of metal sandwich beams under high velocity impact considering time inhomogeneity of core deformation[J]. International Journal of Impact Engineering, 2017, 110: 311-323. doi: 10.1016/j.ijimpeng.2017.05.010
[18]	JIANG W Z, LIU Y, WANG B. The plastic behavior of sandwich beams with core gradation[J]. International Journal of Mechanical Sciences, 2017, 130: 19-30. doi: 10.1016/j.ijmecsci.2017.05.020
[19]	杜志鹏, 张磊, 谌勇, 等. 泡沫覆盖层对水下爆炸气泡射流防护机理缩比试验研究[J]. 应用数学和力学, 2022, 43(5): 569-576 DU Zhipeng, ZHANG Lei, CHEN Yong, et al. Foam layer protective mechanism of shrinkage ratio of underwater explosion bubble jet experimental study[J]. Applied Mathematics and Mechanics, 2022, 43(5): 569-576.(in Chinese)
[20]	柳占立, 初东阳, 王涛, 等. 爆炸和冲击载荷下金属材料及结构的动态失效仿真[J]. 应用数学和力学, 2021, 42(1): 1-14 doi: 10.1007/s10483-021-2692-5 LIU Zhanli, CHU Dongyang, WANG Tao, et al. The explosion and the structure of the metal materials under impact load and dynamic failure simulation[J]. Applied Mathematics and Mechanics, 2021, 42(1): 1-14.(in Chinese) doi: 10.1007/s10483-021-2692-5
[21]	余同希, 朱凌, 许骏. 结构冲击动力学进展(2010‒2020年)[J]. 爆炸与冲击, 2021, 41(12): 121401 YU Tongxi, ZHU Ling, XU Jun. Progress in structural impact dynamics (2010‒2020)[J]. Explosion and Shock Waves, 2021, 41(12): 121401.(in Chinese)
[22]	TILBROOK M T, DESHPANDE V S, FLECK N A. The impulsive response of sandwich beams: analytical and numerical investigation of regimes of behaviour[J]. Journal of the Mechanics and Physics of Solids, 2006, 54(11): 2242-2280. doi: 10.1016/j.jmps.2006.07.001