Application of Bamboo-Based Laminates in the Design of Large-Scale Wind Turbine Blades

WANG Long; LI Hui; WANG Tong-guang

doi:10.3879/j.issn.1000-0887.2013.10.004

Volume 34 Issue 10

Turn off MathJax

Article Contents

Article Navigation > Applied Mathematics and Mechanics > 2013 > 34(10): 1040-1047

WANG Long, LI Hui, WANG Tong-guang. Application of Bamboo-Based Laminates in the Design of Large-Scale Wind Turbine Blades[J]. Applied Mathematics and Mechanics, 2013, 34(10): 1040-1047. doi: 10.3879/j.issn.1000-0887.2013.10.004

Citation:

PDF( 2695 KB)

Application of Bamboo-Based Laminates in the Design of Large-Scale Wind Turbine Blades

doi: 10.3879/j.issn.1000-0887.2013.10.004

¹Jiangsu Key Laboratory of Hi-Tech Research for Wind Turbine Design, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, P.R.China;²Wuxi Wind Power Institute Ltd Co, Wuxi, Jiangsu 100084, P.R.China

Funds: The National Basic Research Program of China (973 Program)（2014CB046200）

Received Date: 2013-04-23
Rev Recd Date: 2013-09-06
Publish Date: 2013-10-15

Abstract

Abstract

From the viewpoint of material and structure in the design of large-scale wind turbine bamboo-based blades, a series of mechanical property tests and basic characteristics of bamboo-based laminates as the major enhancement materials for blade spars were briefly introduced. Based on these material performance data, the aerodynamic and structural design of a 1.5 MW wind turbine bamboo-based blade in conventional form was carried out. Then, the process of the blade structure-overlay was documented in some detail especially. For completeness, some technical issues existing in the design of bamboo-based blade were discussed.
- wind turbine,
- blade design,
- bamboo-based blade

FullText(HTML)

References(9)

References

[1]	Goren A, Atas C. Manufacturing of polymer matrix composites using vacuum assisted resin infusion molding[J].Archives of Materials Science and Engineering,2008,34(2): 117-120.
[2]	AlyHassan M S, Hatta H, Wakayama S, Watanabe M, Miyagawa K. Comparison of 2D and 3D carbon/carbon composites with respect to damage and fracture resistance[J].Carbon,2003,41(5): 1069-1078.
[3]	王珑, 王同光, 罗源. 改进的NSGAⅡ算法研究风力机叶片多目标优化[J]. 应用数学和力学, 2011,32(6): 693-701.(WANG Long, WANG Tong-guang, LUO Yuan. Improved nondominated sorting genetic algorithm NSGA-II in multi-objective optimization studies of wind turbine blades[J].Applied Mathematics and Mechanics,2011,32(6): 693-701. (in Chinese))
[4]	WANG Tong-guang, WANG Long, ZHONG Wei, XU Bo-feng, CHEN Li. Large-scale wind turbine blade design and aerodynamic analysis[J].Chin Sci Bull,2012,57(5): 466-472.
[5]	Park J, Kim J, Shin Y, Lee J, Park J. 3 MW class offshore wind turbine development[J].Current Applied Physics,2010,10(2): 307-310.
[6]	Griffin D A, Zuteck M D. Scaling of composite wind turbine blades for rotors of 80 to 120 meter diameter[J].Journal of Solar Energy Engineering,2001,123(4): 310-319.
[7]	Bossanyi E A. Wind turbine control for load reduction[J].Wind Energy,2003,6(2): 229-244.
[8]	Deb K, Agrawal S, Pratab A, Meyarivan T. A fast elitist non-dominated sorting genetic algorithm for multi-objective: NSGAII[J].Evolutionary Computation,2002,6(2): 182-197.
[9]	Lindenburg C.Aeroelastic Analysis of the LMH64-5 Blade Concept [M]. New York: AddisonWesley, 2003.