ZHANG Pan, XU Ying-jie, WANG Hai-bin, GU Jing-wei. Stress Analyses of Double Lap Bonding Joint Using Viscoelastic Constitutive Model[J]. Applied Mathematics and Mechanics, 2015, 36(2): 159-166. doi: 10.3879/j.issn.1000-0887.2015.02.005
Citation: ZHANG Pan, XU Ying-jie, WANG Hai-bin, GU Jing-wei. Stress Analyses of Double Lap Bonding Joint Using Viscoelastic Constitutive Model[J]. Applied Mathematics and Mechanics, 2015, 36(2): 159-166. doi: 10.3879/j.issn.1000-0887.2015.02.005

Stress Analyses of Double Lap Bonding Joint Using Viscoelastic Constitutive Model

doi: 10.3879/j.issn.1000-0887.2015.02.005
Funds:  The National Natural Science Foundation of China(11302174)
  • Received Date: 2014-06-10
  • Rev Recd Date: 2014-10-06
  • Publish Date: 2015-02-15
  • The finite element model of steel-rubber double lap bonding joint was created. The generalized Maxwell viscoelastic constitutive model was employed to model the time-dependent mechanical properties of adhesive. The Yeoh constitutive model was applied to describe the super elasticity of rubber. The influence of loading time on the shear stress of adhesive layer was analyzed. Computed results clearly show that the absolute value of shear stress decreases with the increase of loading time. In addition, the influence of adhesive thickness on the shear stress of adhesive layer is analyzed as well. With the increase of adhesive thickness, the absolute value of shear stress firstly increases obviously.
  • loading
  • [1]
    游敏, 郑小玲, 郑勇. 金属结构胶接[M]. 武汉: 武汉水利电力大学出版社, 2000.(YOU Min, ZHENG Xiao-ling, ZHENG Yong. Bonding of Metal Structures [M]. Wuhan: Wuhan University of Hydraulic and Electrical Engineering Press, 2000.(in Chinese))
    [2]
    Jagota A, Bennison S J, Smith C A. Analysis of a compressive shear test for adhesion between elastomeric polymers and rigid substrates[J]. International Journal of Fracture,2000,104(2): 105-130.
    [3]
    YOU Min, ZHENG Yong, ZHENG Xiao-ling, LIU Wen-jun. Effect of metal as part of fillet on the tensile shear strength of adhesively bonded single lap joints[J]. International Journal of Adhesion and Adhesives,2003,23(5): 365-369.
    [4]
    Da Silva L F M, Ferreira N M A J, Richter-Trummer V, Marqu E A S. Effect of grooves on the strength of adhesively bonded joints[J]. International Journal of Adhesion and Adhesives,2010,30(8): 735-743.
    [5]
    Sancaktar E, Simmons S R. Optimization of adhesively-bonded single lap joints by adherend notching[J]. Journal of Adhesion Science and Technology,2000,14(11): 1363-1404.
    [6]
    Allman D J. A theory for elastic stresses in adhesive bonded lap joints[J]. The Quarterly Journal of Mechanics and Applied Mathematics, 1977,30(4): 415-436.
    [7]
    Hart-Smith L J. Adhesive-Bonded Single-Lap Joints [M]. Hampton, VA: Langley Research Center, 1973.
    [8]
    Chen D, Cheng S.An analysis of adhesive-bonded single-lap joints[J]. Journal of Applied Mechanics,1983,50(1): 109-115.
    [9]
    Luo Q, Tong L. Linear and higher order displacement theories for adhesively bonded lap joints[J]. International Journal of Solids and Structures,2004,41(22): 6351-6381.
    [10]
    余海洲, 游敏, 郑小玲, 付建科. 单搭接接头胶层间隙对强度和应力的影响[J]. 机械强度, 2006,28(5): 775-779.(YU Hai-zhou, YOU Ming, ZHENG Xiao-lin, FU Jian-ke. Effect of adhesive of recessing on the strength and stress of single-Lap joint[J]. Journal of Mechanical Strength,2006,28(5): 775-779.(in Chinese))
    [11]
    游敏, 严沾谋, 郑小玲, 余海洲.端部斜削的铝单搭接接头应力分布的数值分析[J].航空材料学报, 2007,27(5): 91-94.(YOU Min, YAN Zhan-mou, ZHENG Xiao-ling, YU Hai-zhou. Effect of outer chamfer on stress distribution in single lap joint[J]. Journal of Aeronautical Materials,2007,27(5): 91-94.(in Chinese))
    [12]
    Lang T P, Mallick P K. Effect of spew geometry on stresses in single lap adhesive joints[J]. International Journal of Adhesion and adhesives,1998,18(3): 167-177.
    [13]
    Adams R D, Coppendale J, Peppiatt N A. Stress analysis of axisymmetric butt joints loaded in torsion and tension[J]. The Journal of Strain Analysis for Engineering Design,1978,13(1): 1-10.
    [14]
    Darwish S M. Analysis of weld-bonded dissimilar materials[J]. International Journal of Adhesion and Adhesives,2004,24(4): 347-354.
    [15]
    Owens J F P, Lee-Sullivan P. Stiffness behaviour due to fracture in adhesively bonded composite-to-aluminum joints—II: experimental[J]. International Journal of Adhesion and Adhesives,2000,20(1): 47-58.
    [16]
    Crocombe A D, Adams R D. An elasto-plastic investigation of the peel test[J]. The Journal of Adhesion,1982,13(3/4): 241-267.
    [17]
    Christensen R M. Theory of Viscoelasticity [M]. New York: Academic Press, 1982.
    [18]
    Chiaki S. Stress estimation of joints having adherends with different curvatures bonded with viscoelastic adhesives[J]. International Journal of Adhesion and Adhesives,2011,31(5): 315-321.
    [19]
    Wang Y. Integrated measurement technique to measure curing process-dependent mechanical and thermal properties of polymeric materials using fiber bragg grating sensors[D]. PhD Thesis. University of Maryland, 2009.
    [20]
    危银涛, 杨挺青, 杜星文. 橡胶类材料大变形本构关系及其有限元方法[J]. 固体力学学报, 1999,20(4):282-289.(WEI Yin-tao , YANG Tin-qing, DU Xing-wei. On the large deformation rubber-link materials: constitutive laws and finite element method[J]. Chinese Journal of Solid Mechanics,1999,20(4): 282-289.(in Chinese))
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1116) PDF downloads(1125) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return