Fluid-Solid-Heat Coupling Study on Liquid Film Seal for High Temperature Oil Pumps

YANG Dan-dan; HAO Mu-ming; ZHANG Yuan; ZHANG Da-hai; ZHUANG Yuan; WANG Xuan-ying

doi:10.3879/j.issn.1000-0887.2015.03.005

Volume 36 Issue 3

Turn off MathJax

Article Contents

Article Navigation > Applied Mathematics and Mechanics > 2015 > 36(3): 274-284

YANG Dan-dan, HAO Mu-ming, ZHANG Yuan, ZHANG Da-hai, ZHUANG Yuan, WANG Xuan-ying. Fluid-Solid-Heat Coupling Study on Liquid Film Seal for High Temperature Oil Pumps[J]. Applied Mathematics and Mechanics, 2015, 36(3): 274-284. doi: 10.3879/j.issn.1000-0887.2015.03.005

Citation:

PDF( 5034 KB)

Fluid-Solid-Heat Coupling Study on Liquid Film Seal for High Temperature Oil Pumps

doi: 10.3879/j.issn.1000-0887.2015.03.005

¹College of Chemical Engineering, China University of Petroleum(East China), Qingdao, Shandong 266580, P.R.China;²Dongying Hiscien Sealing Technology Co., Ltd., Dongying, Shandong 257000, P.R.China

Funds: The National Natural Science Foundation of China(51375497)

Received Date: 2014-09-18
Rev Recd Date: 2015-01-13
Publish Date: 2015-03-15

Abstract

Abstract

A periodical model for rotor-stator rings was constructed with the meshing software, and the 3D force coupling and force-heat coupling behaviors of the rotor-stator system were computed by means of ANSYS Workbench 15.0. The influences of the force coupling and force-heat coupling on the ring end face deformation were investigated. The operation parameters (speed, pressure difference) affecting the end face deformation were discussed and the stresses caused by the force-heat coupling were analyzed. It is concluded that the circumferential wavy deformation and radial tapering deformation generated by the force coupling are beneficial to stability of the interstitial fluid, the deformation generated by the thermal load plays a major role in the total deformation by the force-heat coupling, and the rotation rate has noticeable influence on the deformation by the force-heat coupling.
- high temperature oil pump,
- liquid film seal,
- coupling,
- deformation,
- stress

FullText(HTML)

References(14)

References

[1]	Zhu G. Computer prediction of mechanical seal performance and experimental validation[J].Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology,1999,213(6): 433-449.
[2]	廖传军, 黄伟峰. 核主泵机械密封的流固强耦合模型[J]. 中国科学: 技术科学, 2011,41(12): 1649-1657.(LIAO Chuan-jun, HUANG Wei-feng. Fluid-solid strong-interaction model of mechanical seals in reactor coolant pumps[J].Scientia Sinica: Techologica,2011,41(12): 1649-1657.(in Chinese))
[3]	彭旭东, 刘鑫, 孟祥铠, 盛颂恩, 李纪云. 核主泵用双锥度端面流体静压机械密封热弹流效应研究[J]. 摩擦学学报, 2012,32(3): 244-250.(PENG Xu-dong, LIU Xin, MENG Xiang-kai, SHENG Song-en, LI Ji-yun. Thermo elasto hydrostatic effect analysis of a double tapered hydrostatic mechanical seal in reactor coolant pumps[J].Tribology,2012,32(3): 244-250.(in Chinese))
[4]	Galenne E, Pierre-Danos I, Brunetiere N, Tournerie B. Influence of secondary O-rings on hydrostatic mechanical seals in PWR reactor coolant pumps[C]//Proc Advanced Topics and Technical Solutions in Dynamic Sealing Workshop,Poitiers, France, 2005: 45-57.
[5]	Galenne E, Pierre-Danos I. Thermo-elasto-hydro-dynamic modeling of hydrostatic seals in reactor coolant pumps[J].World Tribology Congress III,2005,2(9): 211-212.
[6]	宋学官, 蔡林, 张华. ANSYS流固耦合分析与工程实例[M]. 北京: 中国水利水电出版社, 2012: 3-4.(SONG Xue-guan, CAI Lin, ZHANG Hua.The Fluid-Structure Interaction Analysis and Engineering Examples[M]. Beijing: China Water & Power Press, 2012: 3-4.(in Chinese))
[7]	胡丹梅, 郝木明. 螺旋槽上游泵送机械密封端面参数结构优化[J]. 润滑与密封, 2003,4(1): 35-37.(HU Dan-mei, HAO Mu-ming. Geometry optimization of spiral groove upstream pumping mechanical seals[J].Lubrication Engineering,2003,〖STHZ〗 4(1): 35-37.(in Chinese))
[8]	周剑锋. 机械密封中的热流体动力效应研究[D]. 博士学位论文. 南京: 南京工业大学, 2006: 67-70.(ZHOU Jian-feng. Research on thermal hydrodynamic effect of mechanical seal[D]. PhD Thesis. Nanjing: Nanjing University of Technology, 2006: 67-70.(in Chinese))
[9]	Salant R F, Key W E. Development of an analytical model for use in mechanical seal design[C]//Tenth International Conference on Fluid Sealing,1984: 325-343.
[10]	Orcutt F K. An investigation of the operation and failure of mechanical face seals[J].Journal of Lubrication Technology,1969,91(4): 713-725.
[11]	陈汇龙, 王强, 李雯瑜. 基于Fluent的螺旋槽上游泵送机械密封三维微间隙流场数值模拟[J]. 润滑与密封, 2012,37(2):16-18.(CHEN Hui-long, WANG Qiang, LI Wen-yu. Numerical simulation of 3-D flow in upstream pumping mechanical seals with spiral grooves based[J].Lubrication Engineering,2012,37(2): 16-18.(in Chinese))
[12]	陈利海, 葛培琪, 程建辉. 机械密封温度场的可视化计算[J]. 流体机械, 2001,29(5): 28-31.(CHEN Li-hai, GE Pei-qi, CHENG Jian-hui. Visual calculation of temperature field of mechanical seal[J].Fluid Machinery,2001,29(5): 28-31.(in Chinese))
[13]	厉晓英.高温油泵气膜密封流场与变形数值研究[D]: 硕士学位论文. 青岛: 中国石油大学(华东),2012:12-14.(LI Xiao-ying. Numerical study on flow field and deformation of gas film seal used on high temperature pumps[D]. Master Thesis. Qingdao: China University of Petroleum(East China), 2012: 12-14.(in Chinese))
[14]	陈小宁, 郝木明. 非接触式气体润滑机械密封温度场研究[J]. 通用机械, 2007,6(12): 54-56.(CHEN Xiao-ning, HAO Mu-ming. Research on temperature field of non-contact gas lubricated mechanical seal[J].General Machinery,2007,6(12): 54-56.(in Chinese))