Latest Advancements of the Bridging Model Theory

HUANG Zheng-ming

doi:10.3879/j.issn.1000-0887.2015.06.001

Volume 36 Issue 6

Turn off MathJax

Article Contents

Article Navigation > Applied Mathematics and Mechanics > 2015 > 36(6): 563-581

HUANG Zheng-ming. Latest Advancements of the Bridging Model Theory[J]. Applied Mathematics and Mechanics, 2015, 36(6): 563-581. doi: 10.3879/j.issn.1000-0887.2015.06.001

Citation:

HUANG Zheng-ming. Latest Advancements of the Bridging Model Theory[J]. Applied Mathematics and Mechanics, 2015, 36(6): 563-581. doi: 10.3879/j.issn.1000-0887.2015.06.001

Citation:

HUANG Zheng-ming. Latest Advancements of the Bridging Model Theory[J]. Applied Mathematics and Mechanics, 2015, 36(6): 563-581. doi: 10.3879/j.issn.1000-0887.2015.06.001

PDF( 1029 KB)

Latest Advancements of the Bridging Model Theory

doi: 10.3879/j.issn.1000-0887.2015.06.001

HUANG Zheng-ming

School of Aerospace Engineering & Applied Mechanics, Tongji University, Shanghai 200092, P.R.China

Funds: The National Natural Science Foundation of China(11272238; 11472192)

Received Date: 2014-04-13
Rev Recd Date: 2015-05-01
Publish Date: 2015-06-15

Abstract

Abstract

In order to predict the strength of a composite only based on the mechanical properties of its constituent fiber and matrix materials measured independently, 3 challenging problems must be resolved with high success rate. First, internal stresses in the fiber and matrix must be accurately evaluated. Second, efficient failure detection of the composite in terms of the internal stresses, i.e., the micromechanical strength theory, must be achieved. Last but not the least, the input data of in-situ strengths of the matrix, which can hardly be measured through experiments, must be correctly determined according to its original counterparts available independently. Each of these problems is by no means easy to deal with. This is why the prediction of composite strength is extremely difficult. The bridging model, originally established by HUANG Zheng-ming and further developed to a powerful theory, presents a systematic approach towards solving all of the 3 problems. This paper briefly summarizes the theory by focusing on some of the latest advancements. A number of further research topics are also highlighted in the paper.
- composite,
- strength prediction,
- internal stress evaluation,
- failure criterion,
- stress concentration factor,
- in-situ strength,
- bridging model

FullText(HTML)

References(47)

References

[1]	Hinton M J, Soden P D. Predicting failure in composite laminates: background to the exercise[J].Composites Science and Technology,1998,58(7): 1001-1010.
[2]	黄争鸣. 复合材料细观力学引论[M]. 北京: 科学出版社, 2004.(HUANG Zheng-ming.Introduction to Micromechanics for Composites [M]. Beijing: Science Press, 2004.(in Chinese))
[3]	Kaddour A S, Hinton M J, Soden P D. A comparison of the predictive capabilities of current failure theories for composite laminates: additional contributions[J].Composites Science and Technology,2004,64(3/4): 449-476.
[4]	Ryan S, Wicklein M, Mouritz A, Riedel W, Schfer F, Thoma K. Theoretical prediction of dynamic composite material properties for hypervelocity impact simulations[J].International Journal of Impact Engineering,2009,36(7): 899-912.
[5]	Shaw A, Sriramula S, Gosling P D, Chryssanthopoulos M K. A critical reliability evaluation of fibre reinforced composite materials based on probabilistic micro and macro-mechanical analysis[J].Composites Part B: Engineerin,2001,41(6): 446-453.
[6]	Younes R, Hallal A, Fardoun F, Chehade F H. Comparative review study on elastic properties modeling for unidirectional composite materials[C]//Chapter 17. HU Ning ed.Composites and Their Properties,InTech. 2012: 391-408.(http: //dx.doi.org/ 10.5772/50362)
[7]	Gotsis P K, Chamis C C, Minnetyan L. Prediction of composite laminate fracture: micromechanics and progressive fracture[J].Composites Science and Technology,1998,58(7): 1137-1150.
[8]	Mayes S J, Hansen A C. Composite laminate failure analysis using multicontinuum theory[J].Composites Science and Technology,2004,64(3/4): 379-394.
[9]	HUANG Zheng-ming. A bridging model prediction of the ultimate strength of composite laminates subjected to biaxial loads[J].Composites Science and Technology,2004,64(3/4): 395-448.
[10]	HUANG Zheng-ming. Simulation of the mechanical properties of fibrous composites by the bridging micromechanics model[J].Composites Part A: Applied Science and Manufacturing,2001,32(2): 143-172.
[11]	Benveniste Y. A new approach to the application of Mori-Tanaka’s theory in composite materials[J].Mechanics of Materials,1987,6(2): 147-157.
[12]	Huang Z M, Zhou Y X.Strength of Fibrous Composites [M]. Hangzhou, New York: Zhejiang University Press & Springer, 2011.
[13]	张华山, 黄争鸣. 纤维增强复合材料弹塑性性能的细观研究[J]. 复合材料学报, 2008,25(5): 157-162.(ZHANG Hua-shan, HUANG Zheng-ming. Micromechanical approach to the elastoplastic behavior of a fiber reinforced compsite[J].Acta Materiae Compositae Sinica,2008,25(5): 157-162.(in Chinese))
[14]	ZHOU Ye-xing, HUANG Zheng-ming. A modified ultimate failure criterion and material degradation scheme in bridging model prediction for biaxial strength of laminates[J].Journal of Composite Materials,2008,42(20): 2123-2141.
[15]	HUANG Zheng-ming, LIU Ling. Assessment of composite failure and ultimate strength without experiment on composite[J].Acta Mechanica Sinica,2014,30(4): 569-588.
[16]	Huang Z M. Simulation of inelastic response of multidirectional laminates based on stress failure criteria[J].Materials Science and Technology,2000,16(6): 692-698.
[17]	Huang Z M. Modeling strength of multidirectional laminates under thermo-mechanical loads[J].Journal of Composite Materials,2001,35(4): 281-315.
[18]	HUANG Zheng-ming. On a general constitutive description for the inelastic and failure behaviors of fibrous laminates—part II: laminate theory and applications[J].Computers & Structures,2002,80(13): 1177-1199.
[19]	Garnich M R, Akula V M K. Review on degradation models for progressive failure analysis of fiber reinforced polymer composites[J].Applied Mechanics Reviews,2009,62(1): 010801.1-010801.33.
[20]	Zinoviev P A, Grigoriev S V, Lebedeva O V, Tairova L P. The strength of multi-layered composites under a plane-stress state[J].Composites Science and Technology,1998,58(7): 1209-1223.
[21]	Ramakrishna S, Huang Z-M. Biocomposites[C]//Mai Y-W & Teoh S-H eds.Comprehensive Structural Integrity.Vol9: Bioengineering. New York: Elsevier, 2003: 215-296.
[22]	Eshelby J D. The determination of the elastic field of an ellipsoidal inclusion and related problems[J].Proc Royal Soc A,1957,〖STHZ〗 241(1226): 367-396.
[23]	Cheng S, Chen D. On the stress distribution in laminae[J].Journal of Reinforced Plastics and Composites,1988,7(2): 136-144.
[24]	HUANG Zheng-ming. Micromechanical strength formulae of unidirectional composites[J].Materials Letters,1999,40(4): 164-169.
[25]	HUANG Zheng-ming. Strength formulae of unidirectional composites including thermal residual stresses[J].Materials Letters,2000,43(1/2): 36-42.
[26]	Soden P D, Hinton M J, Kaddour A S. Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates[J].Composites Science and Technology,1998,58(7): 1011-1022.
[27]	Fiedler B, Hojo M, Ochiai S, Schulte K, Ando M. Failure behavior of an epoxy matrix under different kinds of static loading[J].Composites Science and Technology,2001,61(11): 1615-1624.
[28]	HUANG Zheng-ming, LIU Lin. Predicting strength of fibrous laminates under triaxial loads only upon independently measured constituent properties[J].International Journal of Mechanical Sciences,2014,79: 105-129.
[29]	LIU Lin, HUANG Zheng-ming. Stress concentration factor in matrix of a composite reinforced with transversely isotropic fibers[J].Journal of Composite Materials,2014,48(1): 81-98.
[30]	YAO Zhan, HUANG Zheng-ming. Stress concentration factor in the matrix reinforced with fiber having an interface layer[J].Journal of Reinforced Plastics and Composites,2013,32(2): 105-123.
[31]	YAO Zhan, HUANG Zheng-ming. Stress concentration factors in the matrix with different imperfect interfaces[J].International Journal of Damage Mechanics,2013,23(6): 745-771.
[32]	Hine P J, Duckett R A, Kaddour A S, Hinton M J, Wells G M. The effect of hydrostatic pressure on the mechanical properties of glass fiber/epoxy unidirectional composites[J].Composites Part A: Applied Science and Manufacturing,2005,36(2): 279-289.
[33]	Pinho S, Iannucci L, Robinson P. Physically based failure models and criteria for laminated fiber-reinforced composites with emphasis on fiber kinking—part Ⅱ: fe implementation[J].Composites Part A: Applied Science and Manufacturing,2006,〖STHZ〗 37(1): 63-73.
[34]	Aragonés D. Fracture micromechanisms in c/epoxy composites under transverse compression[D]. PhD Thesis. Madrid, Spain: Universidad Politécnica de Madrid, 2007.
[35]	Huang Z-M, Xin L M. Stress concentration factors of matrix in a composite, submitted toComp Sci Tech. (2015)
[36]	Kaddour A S, Hinton M J, Smith P A, Li S. Mechanical properties and details of composite laminates for the test cases used in the third world-wide failure exercise[J].Journal of Composite Materials,2013, 47(20/21): 2427-2442.
[37]	Kaddour A S, Hinton M J. Input data for test cases used in benchmarking triaxial failure theories of composites[J].Journal of Composite Materials,2012,46(19/20): 2295-2312.
[38]	Hinton M J, Kaddour A S, Soden P D. A comparison of the predictive capabilities of current failure theories for composite laminates, judged against experimental evidence[J].Composites Science and Technology,2002,62(12/13): 1725-1797.
[39]	Hinton M J, Kaddour A S, Soden P D. A further assessment of the predictive capabilities of current failure theories for composite laminates: comparison with experimental evidence[J].Composites Science and Technology,2004,64(3/4): 549-588.
[40]	Benveniste Y, Dvorak G J. On a correspondence between mechanical and thermal effects in two-phase composites[C]//Weng G J, Taya M, Abe H S eds.The Toshio Muta Anniversary Volume: Micromechanics and Inhomogeneity.New York, 1990: 65-81.
[41]	Levin V M. On the coefficients of thermal expansion of heterogeneous materials[J].Mekhanika Tverdovo Tela,1967(1): 88-94.(in Russian)
[42]	Shokrieh M M, Mosalmani R, Omidi M J. Strain-rate dependent micromechanical method to investigate the strength properties of glass/epoxy composites[J].Composite Structures,2014,111: 232-239.
[43]	Shokrieh M M, Mosalmani R, Omidi M J. A strain-rate dependent micromechanical constitutive model for glass/epoxy composites[J].Composite Structures,2015,121: 37-45.
[44]	Kumar P, Chandra R, Singh S P. Interphase effect on damping in fiber reinforced composites[J]. ICCES,2007,4(2): 67-72.
[45]	WANG Yan-chao, HUANG Zheng-ming. A new approach to a bridging tensor[J/OL].Polymer Composites,2014. doi: 10.1002/pc.23048 (published online)
[46]	Wang Y C, Huang Z M. Bridging tensor with an imperfect interface[J]. submitted toEuropean Journal of Mechanics-A/Solids,2015.
[47]	Tay T E. Characterization and analysis of delamination fracture in composites: an overview of developments from 1990 to 2001[J].Applied Mechanics Reviews,2003,56(1): 1-32.