Analysis of Surface Crack on Forward Extruding Bar during Axisymmetric Cup-Bar Combined Extrusion Process

Li Miao-quan; Wu Shi-chun; Tang Cai-rong

Article Contents

Article Navigation > Applied Mathematics and Mechanics > 1990 > 11(8): 687-695

Li Miao-quan, Wu Shi-chun, Tang Cai-rong. Analysis of Surface Crack on Forward Extruding Bar during Axisymmetric Cup-Bar Combined Extrusion Process[J]. Applied Mathematics and Mechanics, 1990, 11(8): 687-695.

Citation:

PDF( 601 KB)

Analysis of Surface Crack on Forward Extruding Bar during Axisymmetric Cup-Bar Combined Extrusion Process

Northwest Polytechnical University, Xi'an

Received Date: 1989-05-04
Publish Date: 1990-08-15

Abstract

Abstract

In this paper, the kinematically admissible velocity field with surface crack on forward extruding bar is put forward during the axisymmetric cup-bar combined extrusion process, in accordance with the results of model experiments.On the basis of velocity field, the necessary condition for surface crack formation on the forward extruding bar is derived, with the help of upper bound theorem and the minimum energy principle. Meanwhile, the relationships between surface crack formation and combination of reduction in area for the part of forward and backward extursions (ε_b,ε_f) relative residual thickness of billet (T/R₀),frictional factor (m) or relative land length of ram and chamber (l_b|R₀,l_f|R₀) are calculated during the extrusion process. Therefore, whether the surface crack on forward exturding bar occurs can be predicted before extruding the lower-plasticity metals for axisymmetric cup-bar combined extrusion process.The analytical results agree very well with experimental results of aluminium alloy LY12 (ASTM 2024) and LC4 (ASTM 7075).

FullText(HTML)

References(12)

References

[1]	工藤英明等,《冷间锻造ハンドブツグフ》,株式会社マグネ(173).
[2]	Hingwe,A.K.,Quality Control Source Book:Application of QC to Ferrous Metalforming,ASM,Metal Part,Ohio(1982),349-357.
[3]	吴诗悼、朱志文等,可热处理铝合金的温热复合挤压,西北工业大学学报,3.4(1976)428-437.
[4]	赫茨博格,R. W 《工程断裂力学》,王克仁等译,机械工业出版社(1976).
[5]	Avitzur,B.,Metal Forming;The Application of Limit Analysis,N.Y.&Basel,Marcel Dekker Inc.Ltd.(1980).
[6]	Schreiber,M.P.,Combined physical and numerical simulation in metalforming,Journal of Mechanical Working Technology,12,2(1986),243-254.
[7]	朱志文,轴对称杯杆型复合挤压研究,西北工业大学硕士论文(1984).
[8]	李森泉、吴诗惊,正挤压时的表面裂纹估测,锻压技术,14,6 (1989),2-7.
[9]	Fox,R.L.,Optimization Methods for Engineering Design,Addison-Wesley Publishing Company(1971).
[10]	Male,A.T.,and M.G.Cockcroft,A method for the determination of the coefficient of friction of metals under conditions of bulk plastic deformation,Journal of the Institute of Metals,93,3(1964),38-45.
[11]	.
[12]	江国屏等,圆环塑性压缩试验的标定曲线,锻压技术,(1981)7-16.