Citation: | Wang Xing-fa. The Leakage Criterions of Thin-Wall Pressure Vessels,Materials of Missile and Spacecraft[J]. Applied Mathematics and Mechanics, 1986, 7(9): 861-866. |
[1] |
Sih,C.F.et al,Fully plastic crack problems part 1:solutions by a penalty method,Transactions of the ASME,Journal of Applied Mechanics 51,1 March(1984),48-56.
|
[2] |
Irwin,G.R.,Crack-extension for partthrough crack in a plate,Trans.Am.Soc.Mech.Engrs.JAM.29,(1962),651-654.
|
[3] |
Shan,R.C.and A.S.Kobayashi Crack approaching the surface of a plate in bending,ASTM.STP 513(1972).
|
[4] |
Orang,T.W.,Fracture of thin section containing through and partthrough Crack,ASTM.STP 496(1971),61-81.
|
[5] |
Erdogan,F.Ductile fracture theories for pressurized pipes and containers,Inter.J Pres.Ves.Pip.4,(1976),253-284.
|
[6] |
ASTM Committe,The slow grouth and rapid propagation of cracks,Materials Res.and Standards,1(1961),389-394.
|
[7] |
Irwin,G.R.,Fracture of Pressure Vessels,Materials for Missles and Spacecraft,McGraw-Hill(1963),204-229.
|
[8] |
Irwin,G.R.and J.E.Srawley,Progress in the development of crack toughness fracture tests,Material Prufung,4,(1962),1-11.
|
[9] |
Dixon,J.R.,Stress and strain distributions around cracks in sheet materials having various work hardening characteristics,Int.J Fract.Meth.,1(1965),224-243.
|
[10] |
Ruedl,E.,Void fromation at the interface between particles and matrix in deformed al-al2O3 foils J Mat.Scien.4(1969) 814-815,
|
[11] |
Broek,D.,On the formation of fatique striations,Int.J.Fract.Mech.,8(1972),75-86.
|
[12] |
Underwood,J.H.,Measurement of microscopic plastic-strain distributions in the region of a crack tip,Exp.Mech.(1969),296-304.
|
[13] |
Hahn,G.T.and A.R.,Rosenfield Plastic zones generated by cracks growing under load,Inter.Jou.Fract.Mech.,4(1968).
|
[14] |
Hahn,G.T.and A.R.Rosenfield,Local yielding and extension of a crack under plane stress,Acta.Met.,13(1965),293-306.
|
[15] |
艾庆发等,带有表面裂纹燃烧室的断裂分析,应用力学,1(1980),152.
|
[16] |
谢静宜等,具有表面裂纹的Zr-4金属合金管的爆破实验和分析,第三届全国断裂力学讨论会论文集(1981).
|
[17] |
Anon.,EPRI ductile fracture research reviews document,Norris D.M.,et al.,ed.,NP-80-10-LD Special Study Project WS80-912,Workshop Report,Electric Power Research Institute,Palo Alto,Calif,Dec.(1980).
|
[18] |
Kumar,V.et al.,An engineering approach for elastic-plastic fracture analysis,EPRI Topical Report NP-1931,Electric Power Research Institute,Palo Alto,Calif,July(1981).
|
[19] |
Sih,C.F.et al.,An engineering approach for examining crack growth and stability in flawed stractures,International Journal of Pressure Vessel and Piping,9(1981),159-196.
|
[20] |
Goldman,N.L.,et al.,Fully plastic crack problems:the center-cracked strip under plane strain,International Journal of Solids and Stractures,11(1975),575-591.
|
[21] |
Shih,C.F.et al.,Full plastic solutions and large scale yielding estimates for plane stress crack problems,ASME Journal of Engineering Materials and Technolegy,98(1976),289-295.
|
[22] |
Weedleman,A.,et al.,Finite element method for plane strain deformations of incompressible solids,Computer Method in Applied Mechanics and Engineering,15(1978),223-240.
|
[23] |
Hutchinson,J.W.,et al.,Fully plastic crack problems in bending and tension,in Frature Mechanics,Perrone,N et al.,eds.Uni.Press of Virginia,Charlottesville(1978),515-528.
|