ZHOU Hua-min, SUN Qiang, XI Guo-dong, LI De-qun. Numerical Prediction of Process-Induced Residual Stresses in Glass Bulb Panel[J]. Applied Mathematics and Mechanics, 2006, 27(9): 1047-1055.
Citation: ZHOU Hua-min, SUN Qiang, XI Guo-dong, LI De-qun. Numerical Prediction of Process-Induced Residual Stresses in Glass Bulb Panel[J]. Applied Mathematics and Mechanics, 2006, 27(9): 1047-1055.

Numerical Prediction of Process-Induced Residual Stresses in Glass Bulb Panel

  • Received Date: 2005-10-19
  • Rev Recd Date: 2006-04-06
  • Publish Date: 2006-09-15
  • A numerical simulation model for predicting residual stresses which arise during the solidification process of pressed glass bulb panel was developed. The solidification of a molten layer of glass between cooled parallel plates was used to model the mechanics of the buildup of residual stresses in the forming process. A thermorheologically simple thermoviscoelastic model was assumed for the material. The finite element method employed was based on the theory of shells as an assembly of flat elements. This approach calculates residual stresses layer by layer like a truly three-dimensional calculation, which is well suited for thin pressed products of complex shape. An experimental comparison is employed to verify the proposed models and methods.
  • loading
  • [1]
    Leaderman H.Viscoelasticity Phenomena in Amorphous High Polymeric Systems[M].Chap 1.In:Etrich F R Ed.Rheology.New York:Academic Press,1958,1—16.
    [2]
    Schwarzl F,Staverman A J. Time-temperature dependence of linear viscoelastic behavior[J].Applied Physics,1952,23(8):838—843.
    [3]
    Gurtin M E,Sternberg G E.Further study of thermal stresses in viscoelastic materials with temperature-dependent properties[A].In:Second-Order Effects in Elasticity, Plasticity and Fluid Dynamics, International Symposium[C].Haifa, Israel.Oxford:Pergamon Press,1962, 51—76.
    [4]
    Lee E H,Rogers T G.Solution of stress analysis problems for linear viscoelastic materials based on measured deformation functions[J].ASME Transactions, Journal of Applied Mechanics,1963,30:127—133. doi: 10.1115/1.3630057
    [5]
    Narayanaswamy O S,Gardon R. Calculation of residual stresses in glass[J].Journal of American Ceramic Society,1969,52(10):554—558. doi: 10.1111/j.1151-2916.1969.tb09163.x
    [6]
    Mauch F,Jackle J. Thermoviscoelastic theory of freezing of stress and strain in a symmetrically cooled infinite glass plate[J].Journal of Non-Crystalline Solids,1994,170(1):73—86. doi: 10.1016/0022-3093(94)90106-6
    [7]
    Daudeville L,Carre H.Thermal tempering simulation of glass plates: Inner and edge residual stresses[J].Journal of Thermal Stresses,1998,21(6):667—689. doi: 10.1080/01495739808956168
    [8]
    Daudeville L,Bernard F,Gy R.Residual stresses near holes in tempered glass plates[A].In:Materials Science Forum[C].Uetikon-Zurich:Trans Tech Publications Inc,2002,404-407:43—48.
    [9]
    Bushko W C,Stokes V K.Solidification of thermoviscoelastic melts. PartⅠ—Formulation of model problem[J].Polymer Engineering and Science,1995,35(4):351—364. doi: 10.1002/pen.760350409
    [10]
    Lee Y B,Kwon T H,Yoon K. Numerical prediction of residual stresses and birefringence in injection/compression molded center-gated disk Part Ⅰ—Basic modeling and results for injection molding[J].Polymer Engineering and Science,2002,42(11):2246—2272. doi: 10.1002/pen.11114
    [11]
    Lee Y B,Kwon T H,Yoon K.Numerical prediction of residual stresses and birefringence in injection/compression molded center-gated disk Part Ⅱ—Effects of processing conditions[J].Polymer Engineering and Science,2002,42(11):2273—2292. doi: 10.1002/pen.11115
    [12]
    Kamal M R,Lai-Fook R L,Hernandez-Aguilar J R.Residual thermal stresses in injection moldings of thermoplastics: A theoretical experimental study[J].Polymer Engineering and Science,2002,42(5):1098—1114. doi: 10.1002/pen.11015
    [13]
    Aben H,Ainola L,Anton J.Integrated photoelasticity for nondestructive residual stress measurement in glass[J].Optics and Lasers in Engineering,2000,33(1):49—64. doi: 10.1016/S0143-8166(00)00018-X
    [14]
    Gerasimov S I,Bachurina N S,Emelyanova N N. Application of photoelasticity for analysis of residual stresses in CDs[J].Proceedings of SPIE-The International Society for Optical Engineering,2002,4900(1):606—610.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (2140) PDF downloads(632) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return