LI Zhi, CHEN Jian, SHEN Jin-long, LIU Xiao-jun. Effects of Surface Topography on Friction Noise Under Elastohydrodynamic Lubrication Condition[J]. Applied Mathematics and Mechanics, 2017, 38(7): 807-817. doi: 10.21656/1000-0887.370231
Citation: LI Zhi, CHEN Jian, SHEN Jin-long, LIU Xiao-jun. Effects of Surface Topography on Friction Noise Under Elastohydrodynamic Lubrication Condition[J]. Applied Mathematics and Mechanics, 2017, 38(7): 807-817. doi: 10.21656/1000-0887.370231

Effects of Surface Topography on Friction Noise Under Elastohydrodynamic Lubrication Condition

doi: 10.21656/1000-0887.370231
Funds:  The National Natural Science Foundation of China(51375132)
  • Received Date: 2016-07-22
  • Rev Recd Date: 2016-10-08
  • Publish Date: 2017-07-15
  • The effects of surface topography on the friction noise were studied under the elastohydrodynamic lubrication (EHL) condition. 2 kinds of groove-textured surface topographies were fabricated by laser texturing on the surface of the metal disc specimen. Friction noises and friction characteristics of different surface topographies were tested on a modified JPM-1 2-disc tribo-tester. The effects of different operating conditions and surface topographies on the friction noise under line contact EHL conditions were analyzed, and the results were verified with the finite element analysis. The work shows that, variations of the load and the rotational speed have significant effects on the line contact friction noise. Since the line contact pairs usually work in a partial EHL condition, the friction noise characteristics are similar to those of dry friction: the surface with a larger friction coefficient will radiate stronger friction noise. Specific topographies can improve the lubrication characteristics of the surface, and effectively reduce the sound pressure level of the friction noise. The presence of groove textures can interrupt the stress distribution of the contact area and weaken the impact by surface asperities, thereby reducing the self-excited vibration. At the same time, the proper surface topography structure is also helpful in the formation of lubricating oil film, hence lowering the friction noise as well as the friction energy of the system.
  • loading
  • [1]
    王正国, 莫继良, 陈光雄, 等. 沟槽型织构化表面摩擦噪声特性试验研究[J]. 摩擦学学报, 2013,33(3): 304-310.(WANG Zheng-guo, MO Ji-liang, CHEN Guang-xiong, et al. An experimental study on friction noise properties of groove-textured surfaces[J]. Tribology,2013,33(3): 304-310.(in Chinese))
    [2]
    Ibrahim R A. Friction-induced vibration, chatter, squeal, and chaos—part II: dynamics and modeling[J]. Applied Mechanics Reviews,1994,47(7): 227-253.
    [3]
    Abu Bakar A R, OUYANG Hua-jiang, Siegel J E. Brake pad surface topography part II: squeal generation and prevention[Z]. SAE Technical Paper: 2005-01-3935. doi: 10.4271/2005-01-3935.
    [4]
    王东伟, 莫继良, 王正国, 等. 沟槽织构化表面影响摩擦振动噪声机理[J]. 机械工程学报, 2013,49(23): 112-116.(WANG Dong-wei, MO Ji-liang, WANG Zheng-guo, et al. Mechanism of the effect of groove-textured surface on the friction vibration and noise[J]. Journal of Mechanical Engineering,2013,49(23): 112-116.(in Chinese))
    [5]
    Rusli M, Okuma M. Effect of surface topography on mode-coupling model of dry contact sliding systems[J]. Journal of Sound and Vibration,2007,308(3/5): 721-734.
    [6]
    Ben Abdelounis H, Le Bot A, Perret-Liaudet J, et al. An experimental study on roughness noise of dry rough flat surfaces[J]. Wear,2010,268(1/2): 335-345.
    [7]
    Ben Abdelounis H, Zahouani H, Le Bot A, et al. Numerical simulation of friction noise[J]. Wear,2011,271(3/4): 621-624.
    [8]
    Stoimenov B L, Maruyama S, Adachi K, et al. The roughness effect on the frequency of frictional sound[J]. Tribology International,2007,40(4): 659-664.
    [9]
    陈光雄, 周仲荣. 摩擦系数影响摩擦噪声发生的机理研究[J]. 中国机械工程, 2003,14(9): 766-769.(CHEN Guang-xiong, ZHOU Zhong-rong. Study on the dependence of the squeal generation on friction coefficient[J]. China Mechanical Engineering,2003,14(9): 766-769.(in Chinese))
    [10]
    李兵, 刘焜, 王静, 等. 线接触滑-滚条件下微凹坑表面摩擦特性[J]. 机械工程学报, 2011,47(21): 91-96.(LI Bing, LIU Kun, WANG Jing, et al. Micro cavity’s tribological property under line contact and sliding-rolling conditions[J]. Journal of Mechanical Engineering,2011,47(21): 91-96.(in Chinese))
    [11]
    董帮源, 刘小君, 王静, 等. 表面织构对重载线接触条件下40Cr钢摩擦性能的影响[J]. 摩擦学学报, 2016,36(2): 145-152.(DONG Bang-yuan, LIU Xiao-jun, WANG Jing, et al. Effect of textured surface on the frictional property of 40Cr steel under high load and line contact[J]. Tribology,2016,36(2): 145-152.(in Chinese))
    [12]
    Ananthapadmanaban T, Radhakrishnan V. An investigation of the role of surface irregularities in the noise spectrum of rolling and sliding contacts[J]. Wear,1982,83(2): 399-409.
    [13]
    Dalzin F, Le Bot A, Perret-Liaudet J, et al. Tribological origin of squeal noise in lubricated elastomer-glass contact[J]. Journal of Sound and Vibration,2016,372: 211-222.
    [14]
    单欢乐, 莫继良, 陈光雄, 等. 沟槽形表面织构对摩擦噪声的影响[J]. 中国机械工程, 2012,23(18): 2233-2237.(SHAN Huan-le, MO Ji-liang, CHEN Guang-xiong, et al. Effects of grooved surface texture on friction noise[J]. China Mechanical Engineering,2012,23(18): 2233-2237.(in Chinese))
    [15]
    Bengisu M T, Akay A. Stick-slip oscillations: dynamics of friction and surface roughness[J]. Journal of the Acoustical Society of America,1999,105(1): 194-205.
    [16]
    Akay A. Acoustics of friction[J]. Journal of the Acoustical Society of America,2002,111(4): 1525-1548.
    [17]
    成大先. 机械设计手册: 第1卷[M]. 北京: 化学工业出版社, 2010.(CHENG Da-xian. Mechanical Design Manual: Part 〖STBX〗1 [M]. Beijing: Chemical Industry Press, 2010.(in Chinese))
    [18]
    姜云鹏, 岳珠峰, 韩小平. 由拉伸试样确定材料真实应力应变关系[J]. 机械强度, 2003,25(2): 151-153.(JIANG Yun-peng, YUE Zhu-feng, HAN Xiao-ping. Determination of the materials stress and strain relationship from the tensile smooth and notched bars[J]. Journal of Mechanical Strength,2003,25(2): 151-153.(in Chinese))
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (893) PDF downloads(1167) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return