Volume 43 Issue 4
Apr.  2022
Turn off MathJax
Article Contents
JI Anzhao, WANG Yufeng, ZHANG Guangsheng. A Green’s Function Construction Method of the Single Well Seepage Model for Asymmetric Fractures[J]. Applied Mathematics and Mechanics, 2022, 43(4): 424-434. doi: 10.21656/1000-0887.420237
Citation: JI Anzhao, WANG Yufeng, ZHANG Guangsheng. A Green’s Function Construction Method of the Single Well Seepage Model for Asymmetric Fractures[J]. Applied Mathematics and Mechanics, 2022, 43(4): 424-434. doi: 10.21656/1000-0887.420237

A Green’s Function Construction Method of the Single Well Seepage Model for Asymmetric Fractures

doi: 10.21656/1000-0887.420237
  • Received Date: 2021-08-09
  • Rev Recd Date: 2021-10-19
  • Available Online: 2022-03-16
  • Publish Date: 2022-04-01
  • The seepage law for asymmetric fractures can be solved by the Green’s function method. According to the basic seepage theory, the point source mathematical model for asymmetric fractures was established. The dimensionless point source mathematical model differential equation in the Laplacian space was obtained through the dimensionless transformation and the Laplacian transformation. By means of the unknown Green’s function combined with the point source differential equation, and in view of the homogeneous boundary conditions for the point source differential equation and the characteristics of the point source differential equation, a general construction method for Green’s function was given to meet the homogeneous boundary conditions for the point source differential equation and the solution of the unknown objective function. According to the symmetry and continuity of spatial Green’s function, the Green form of the asymmetric fracture point source model was obtained. Finally, through the seepage mathematical model for the asymmetric-fracture vertical well, it was verified that the 2 forms of Green’s function are consistent with the results calculated in references and with the commercial well test analysis software Saphir.

  • loading
  • [1]
    JING L, HEDAN S, AO Z, et al. Non-Darcy binomial deliverability equations for partially penetrating vertical gas wells and horizontal gas wells[J]. Journal of Energy Resources Technology, 2011, 133(4): 043101. doi: 10.1115/1.4005240
    [2]
    WANG L, WANG X D, LI J Q, et al. Simulation of pressure transient behavior for asymmetrically finite-conductivity fractured wells in coal reservoirs[J]. Transport in Porous Media, 013, 7(3): 353-372.
    [3]
    WANG L, WANG X D, DING X M, et al. Rate decline curves analysis of a vertical fractured well with fracture face damage[J]. Journal of Energy Resources Technology, 2012, 134(3): 032803. doi: 10.1115/1.4006865
    [4]
    GRINGARTEN A C, RAMEY H J, RAGHAVAN R. Applied pressure analysis for fractured wells[J]. Journal of Petroleum Technology, 1975, 27(7): 887-892. doi: 10.2118/5496-PA
    [5]
    CINCOLEY H, HEBER, SAMANIEGO V F, DOMINGUEZ A N. Transient pressure behavior for a well with a finite-conductivity vertical fracture[J]. Society of Petroleum Engineers Journal, 1978, 18(4): 253-264. doi: 10.2118/6014-PA
    [6]
    CINCOLEY H, FERNANDO SAMANIEGO V F. Transient pressure analysis for fractured wells[J]. Journal of Petroleum Technology, 1981, 33(9): 1749-1766. doi: 10.2118/7490-PA
    [7]
    CRAWFORD P B, LANDRUM B L. Effect of unsymmetrical vertical fractures on production capacity[J]. Transactions of the AIME, 1955, 204(1): 251-254. doi: 10.2118/433-G
    [8]
    NARASIMHAN T N, PALEN W A. A purely numerical approach for analyzing flow to a well intercepting a vertical fracture: SPE7983[R]. Department of Energy, USA, 1979.
    [9]
    BENNETT C O, ROSATO N D, REYNOLDS A C. Influence of fracture heterogeneity and wing length on the response of vertically fractured wells[J]. Society of Petroleum Engineers Journal, 1983, 23(2): 219-230. doi: 10.2118/9886-PA
    [10]
    RESURREICAO C, FERNANDO R. Transient rate behavior of finite-conductivity asymmetrically fractured wells producing at constant pressure[C]//SPE Annual Technical Conference and Exhibition. Dallas, Texas, 1991: SPE-22657-MS.
    [11]
    BERUMEN S, TIAB D, RODRIGUEZ F. Constant rate solutions for a fractured well with an asymmetric fracture[J]. Journal of Petroleum Science and Engineering, 2000, 25(1/2): 49-58.
    [12]
    TIAB D, JING L, NGUYEN H, et al. Evaluation of fracture asymmetry of finite-conductivity fractured wells[J]. Journal of Energy Resources Technology, 2010, 132(1): 36-49.
    [13]
    田建涛, 赵超峰, 张伟, 等. 水力压裂井中监测方法不对称压裂裂缝分析[J]. 石油物探, 2019, 58(4): 563-571. (TIAN Jiantao, ZHAO Chaofeng, ZHANG Wei, et al. Analysis of asymmetric hydraulic fracture for borehole microseismic monitoring[J]. Geophysical Prospecting for Petroleum, 2019, 58(4): 563-571.(in Chinese) doi: 10.3969/j.issn.1000-1441.2019.04.011
    [14]
    万义钊, 刘曰武, 吴能友, 等. 基于离散裂缝的多段压裂水平井数值试井模型及应用[J]. 力学学报, 2018, 50(1): 147-156. (WAN Yizhao, LIU Yuewu, WU Nengyou, et al. A numerical well test model for multi-fractured horizontal wells based on discrete-fracture model and its application[J]. Chinese Journal of Theoretical and Applied Mechanics, 2018, 50(1): 147-156.(in Chinese) doi: 10.6052/0459-1879-17-319
    [15]
    CHEN Z M, LIAO X W, HUANG C H, et al. Productivity estimations for vertically fractured wells with asymmetrical multiple fractures[J]. Journal of Natural Gas Science & Engineering, 2014, 21: 1048-1060.
    [16]
    WANG L, WANG X D. Type curves analysis for asymmetrically fractured wells[J]. Journal of Energy Resources Technology, 2014, 136(1): 203101-203108.
    [17]
    王镜惠, 梅明华, 梁正中, 等. 水平井多段压裂非常规裂缝压力动态特征[J]. 新疆石油地质, 2018, 50(1): 147-156. (WANG Jinghui, MEI Minghua, LIANG Zhengzhong, et al. Dynamic pressure characteristics of unconventional fractures during multi-staged fracturing in horizontal wells[J]. Xinjiang Petroleum Geology, 2018, 50(1): 147-156.(in Chinese)
    [18]
    姬安召, 王玉风, 张光生. 不对称垂直裂缝压力动态特征[J]. 计算物理, 2019, 36(1): 47-53. (JI Anzhao, WANG Yufeng, ZHANG Guangsheng. Dynamic pressure characteristics of unconventional fractures during multi-staged fracturing in horizontal wells[J]. Chinese Journal of Computational Physics, 2019, 36(1): 47-53.(in Chinese)
    [19]
    MENG M L, CHEN Z M, LIAO X W, et al. A well-testing method for parameter evaluation of multiple fractured horizontal wells with non-uniform fractures in shale oil reservoirs[J]. Advances in Geo-Energy Research, 2020, 4(2): 187-198. doi: 10.26804/ager.2020.02.07
    [20]
    徐有杰. 水力压裂井复杂裂缝试井模型研究[D]. 硕士学位论文. 成都: 西南石油大学, 2019.

    XU Youjie. Study on well test model of hydraulic fractured well considering complex fractures[D]. Master Thesis. Chengdu: Southwest Petroleum University, 2019. (in Chinese)
    [21]
    OZKAN E, RAGHAVAN R. New solutions for well-test-analysis problems, part 1: analytical considerations[J]. Society of Petroleum Engineers Formation Evaluation, 1991, 6(3): 359-368.
    [22]
    OZKAN E, RAGHAVAN R. New solutions for well-test-analysis problems, part 2: computional considerations[J]. Society of Petroleum Engineers Formation Evaluation, 1992, 29(3): 160-175.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(7)  / Tables(1)

    Article Metrics

    Article views (385) PDF downloads(40) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return