Volume 47 Issue 10
Oct.  2026
Turn off MathJax
Article Contents
Zhao Rui, Li Leilei. Study on the Spatiotemporal Control Mechanism for PCM Spatial Layout in the Heat Transfer Process of Porous Bricks[J]. Applied Mathematics and Mechanics, 2026, 47(10): 1266-1285. doi: 10.21656/1000-0887.460187
Citation: Zhao Rui, Li Leilei. Study on the Spatiotemporal Control Mechanism for PCM Spatial Layout in the Heat Transfer Process of Porous Bricks[J]. Applied Mathematics and Mechanics, 2026, 47(10): 1266-1285. doi: 10.21656/1000-0887.460187

Study on the Spatiotemporal Control Mechanism for PCM Spatial Layout in the Heat Transfer Process of Porous Bricks

doi: 10.21656/1000-0887.460187
  • Received Date: 2025-10-14
  • Rev Recd Date: 2025-12-24
  • Available Online: 2026-10-31
  • Phase change material (PCM) filled porous bricks have garnered significant attention for enhancing building energy efficiency and indoor thermal comfort. However, the intrinsic mechanism by which the spatial layout of PCM within the porous brick regulates the thermal performance remains unclear, limiting the optimal design. To address this, the coupled effects of PCM spatial positions and contents (volume fraction) on thermal performances were investigated through numerical simulations of 8 distinct layout configurations by means of COMSOL Multiphysics. The results show that, the spatial layout, rather than mere the content, is the core variable determining the thermal regulation efficacy. Repositioning a single PCM layer from the exterior to the interior optimizes the spatiotemporal matching between the phase change process and the external temperature fluctuations. Through effective thermal attenuation and damping effects, this layout significantly reduces the inner surface temperature amplitude by 25.7% (from 12.69 ℃ to 9.43 ℃). Furthermore, this study quantifies the “law of diminishing marginal returns” associated with increasing PCM contents. Compared to the optimal single innerlayer layout (with a latent heat utilization rate of 0.97), double and triplelayer configurations exhibit reduced utilization rates of 0.82 and 0.83, respectively. This decline is attributed to insufficient thermal driving force acting on the inner PCM layers, resulting in material redundancy. In view of the tradeoff between thermal performance and material efficiency, the “single innerlayer layout” (Case D) is identified as the optimal solution, achieving significant performance gains with only 1/3 of the maximum PCM capacity. These findings propose a new design paradigm for dynamic energystorage envelopes, shifting from the conventional “thicker is better” approach to a “precise layout” strategy based on spatiotemporal synergy.
  • loading
  • 陈振湘. 建筑暖通空调节能问题及对策分析[J]. 中国设备工程, 2021(12): 217-218.(Chen Zhenxiang. Analysis of energy conservation issues and countermeasures in building HVAC[J].China Plant Engineering,2021

    (12): 217-218. (in Chinese))
    [2]姚翔宇, 马建斌, 王飞娅, 等. 针对夏热冬冷地区的新型承载蓄热超结构墙体力学性能与温控效能研究[J]. 应用数学和力学, 2024,45(8): 1047-1057.(Yao Xiangyu, Ma Jianbin, Wang Feiya, et al. Investigation on mechanical properties and temperature control efficiency of novel load-bearing and heat-storing metastructure walls in hot summer-cold winter regions[J].Applied Mathematics and Mechanics,2024,45(8): 1047-1057. (in Chinese))
    [3]Salman R, Aljabair S. “Energy storage technology: the growing role of phase change materials in the construction industry” a review[J].International Journal of Thermofluids,2024,23: 100712.
    [4]潘涵婷, 许多, 徐洪涛, 等. 空穴效应下泡沫金属复合相变材料热性能数值模拟[J]. 应用数学和力学, 2024,45(1): 85-96.(Pan Hanting, Xu Duo, Xu Hongtao, et al. Numerical analysis on thermal performances of metal foam composite phase change materials under cavity effects[J].Applied Mathematics and Mechanics,2024,45(1): 85-96. (in Chinese))
    [5]Abdullah A A, Ahmed O K, Aziz N M. Performance comparison of PV/Trombe wall utilizing porous media and phase change materials: experimental study[J].Journal of Energy Storage,2025,129: 117316.
    [6]肖力光, 李赫. 相变储能材料在建筑围护结构领域的应用及研究进展[J]. 化工新型材料, 2024,52(4): 228-232.(Xiao Liguang, Li He. Application and research progress of phase change energy storage materials in building envelope structures[J].New Chemical Materials,2024,52(4): 228-232. (in Chinese))
    [7]黄钦, 余凌峰, 陈凯. 相变材料耦合冷板电池热管理系统的优化设计[J]. 应用数学和力学, 2022,43(11): 1195-1202.(Huang Qin, Yu Lingfeng, Chen Kai. Design of the battery thermal management system with phase change material coupled cold plates[J].Applied Mathematics and Mechanics,2022,43(11): 1195-1202. (in Chinese))
    [8]Meng D, Dang X, Wang A, et al. Optimization of double-layer shaped phase change wallboard in buildings in two typical climate areas in China[J].Journal of Energy Storage,2023,61: 106698.
    [9]杨小虎, 李少丹, 陈凯. 第二类边界条件下固液相变问题的改进型准稳态近似解[J]. 应用数学和力学, 2022,43(11): 1249-1258.(Yang Xiaohu, Li Shaodan, Chen Kai. Improved quasi-steady-state approximation analysis of stefan problems under 2nd-kind boundary conditions[J].Applied Mathematics and Mechanics,2022,43(11): 1249-1258. (in Chinese))
    [10]Fan M, Hu M, Suo H, et al. Preferred method and performance evaluation of heterogeneous composite phase change material (CPCM) wallboard in different seasons[J].Renewable Energy,2024,220: 119537.
    [11]孟凡康, 岳扬皓. 孔洞分布形式对部分PCM填充轻质墙体的传热影响[J]. 热科学与技术, 2024,23(3): 241-248.(Meng Fankang, Yue Yanghao. Effect of hole distribution form on heat transfer of partially PCM filled light weight wall[J].Journal of Thermal Science and Technology,2024,23(3): 241-248. (in Chinese))
    [12]Duan S, Huang C, Meng C. Numerical investigation on thermal performance of the solar wall integrated with phase change material[J].Energy and Buildings,2025,336: 115519.
    [13]高伟业, 张赛, 张杰, 等. 含湿相变粗糙多孔材质的热质耦合分形研究[J]. 应用数学和力学, 2022,43(5): 561-568.(Gao Weiye, Zhang Sai, Zhang Jie, et al. Thermo-mass coupling fractal study of wet phase-change rough porous materials[J].Applied Mathematics and Mechanics,2022,43(5): 561-568. (in Chinese))
    [14]Gao Y, Meng X. A comprehensive review of integrating phase change materials in building bricks:methods, performance and applications[J].Journal of Energy Storage,2023,62: 106913.
    [15]Yu Z, Feng D, Feng Y, et al. Thermal conductivity and energy storage capacity enhancement and bottleneck of shape-stabilized phase change composites with graphene foam and carbon nanotubes[J].Composites Part A:Applied Science and Manufacturing,2022,152: 106703.
    [16]张源, 胡自成, 葛风华, 等. 复合相变材料空心砌块的研制及热性能实验分析[J]. 建筑科学, 2016,32(2): 29-35.(Zhang Yuan, Hu Zicheng, Ge Fenghua, et al. Development of composite phase change material hollow block and experimental analysis of its thermal performance[J].Building Science,2016,32(2): 29-35. (in Chinese))
    [17]Rashid F L, Dhaidan N S, Al-Obaidi M, et al. Latest progress in utilizing phase change materials in bricks for energy storage and discharge in residential structures[J].Energy and Buildings,2025,330: 115327.
    [18]Abbas H M, Jalil J M, Ahmed S T. Experimental and numerical investigation of PCM capsules as insulation materials inserted into a hollow brick wall[J].Energy and Buildings,2021,246: 111127.
    [19]倪金鹏, 罗祝清, 屈治国, 等. 不同气候条件下相变屋顶传热性能数值分析[J]. 化工进展, 2022,41(1): 104-112.(Ni Jinpeng, Luo Zhuqing, Qu Zhiguo, et al. Numerical analysis on heat transfer performance of phase change roofs under different climates[J].Chemical Industry and Engineering Progress,2022,41(1): 104-112. (in Chinese))
    [20]Tunbilek E, Arc M, Bouadila S, et al. Seasonal and annual performance analysis of PCM-integrated building brick under the climatic conditions of Marmara region[J].Journal of Thermal Analysis and Calorimetry,2020,141(1): 613-624.
    [21]Hassan R, Ali A B M, Al-Khatib O, et al. Incorporation of nano-encapsulated PCM in clay hollow blocks and cement layer for improving energy efficiency in buildings: a numerical approach[J].Case Studies in Thermal Engineering,2025,73: 106526.
    [22]Salman R, Aljabair S, Jalil J M. Enhancing thermal performance and energy efficiency in concrete bricks with phase change materials: a numerical study[J].Journal of Energy Storage,2025,125: 116937.
    [23]Brahimi M E, Maliki M, Laredj N, et al. Investigation of the thermal efficiency of hollow bricks filled with bio-organic phase change material mixture[J].Journal of Energy Storage,2025,122: 116667.
    [24]Rathore P K S, Patel B, Gupta M K, et al. Experimental analysis of thermal energy efficient clay brick incorporated with phase change material and insulation[J].Process Safety and Environmental Protection,2024,190: 529-541.
    [25]Mukram T A, Daniel J. Performance evaluation of a novel cement brick filled with micro-PCM used as a thermal energy storage system in building walls[J].Journal of Energy Storage,2024,77: 109910.
    [26]Gupta M K, Rathore P K S, Kumar R, et al. Experimental analysis of clay bricks incorporated with phase change material for enhanced thermal energy storage in buildings [J].Journal of Energy Storage,2023,64: 107248.
    [27]Chihab Y, Bouferra R, Garoum M, et al. Thermal inertia and energy efficiency enhancements of hollow clay bricks integrated with phase change materials[J].Journal of Building Engineering,2022,53: 104569.
    [28]Luo Z, Xu H, Lou Q, et al. GPU-accelerated lattice Boltzmann simulation of heat transfer characteristics of porous brick roof filled with phase change materials[J].International Communications in Heat and Mass Transfer,2020,119: 104911.
    [29]Gao Y, He F, Meng X, et al. Thermal behavior analysis of hollow bricks filled with phase-change material (PCM)[J].Journal of Building Engineering,2020,31: 101447.
    [30]Hou F, Cao S, Wang H. New equivalent thermal conductivity model for size-dependent convection-driven melting of spherically encapsulated phase change material[J].Materials,2021,14(16): 4752.
    [31]Reyez-Araiza J L, Pineda-Pión J, López-Romero J M, et al. Thermal energy storage by the encapsulation of phase change materials in building elements: a review[J].Materials,2021,14(6): 1420.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (201) PDF downloads(7) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return