A.H.Mosaffa, F.Talati, M.A.Rosen, H.Basirat Tabrizi. Green’s Function Solution for Transient Heat Conduction in an Annular Fin During Solidification of a PCM[J]. Applied Mathematics and Mechanics, 2012, 33(10): 1180-1188. doi: 10.3879/j.issn.1000-0887.2012.10.004
Citation: A.H.Mosaffa, F.Talati, M.A.Rosen, H.Basirat Tabrizi. Green’s Function Solution for Transient Heat Conduction in an Annular Fin During Solidification of a PCM[J]. Applied Mathematics and Mechanics, 2012, 33(10): 1180-1188. doi: 10.3879/j.issn.1000-0887.2012.10.004

Green’s Function Solution for Transient Heat Conduction in an Annular Fin During Solidification of a PCM

doi: 10.3879/j.issn.1000-0887.2012.10.004
  • Received Date: 2011-10-08
  • Rev Recd Date: 2011-12-15
  • Publish Date: 2012-10-15
  • Green’s function method was applied for the transient temperature of an annular fin when a phase change material solidified on it. The solidification of the phase change materials (PCM) took place in a cylindrical shell storage. The thickness of solid PCM on the fin varied with time and was obtained by the Megerlin method. The models were found by the Bessel equation to form an analytical solution. Three different kinds of boundary conditions were investigated. A comparison of analytical and numerical solutions was given. The results demonstrate that significant accuracy is attained for the temperature distribution for the fin in all cases.
  • loading
  • [1]
    Kraus A D, Aziz A, Welty J. Extended Surface Heat Transfer[M]. New York: Wiley, 2001.
    [2]
    Cheng C Y, Chen C K. Transient response of annular fins of various shapes subjected to constant base heat fluxes[J]. Journal of Physics D: Application Physics, 1994, 27(11): 2302-2306.
    [3]
    Campo A, Rodriguez F. Approximate analytic temperature solution for uniform annular fins by adapting the power series method[J]. International Communications in Heat and Mass Transfer, 1998, 25(6): 809-818.
    [4]
    Koonprasert S, Sangsawang R. Analytical solution and symbolic computation for the temperature distribution of the annular fin under fully wet-surface condition[C]Proceeding of International Conference of Numerical Analysis and Applied Mathematics. American Institute of Physics, 2008.
    [5]
    Sharqawy M H, Zubair S M. Efficiency and optimization of straight fins with combined heat and mass transfer—an analytical solution[J]. Applied Thermal Engineering, 2008, 28(17/18): 2279-2288.
    [6]
    Aziz A, Rahman M M. Thermal performance of a functionally graded radial fin[J]. International Journal of Thermophysics, 2009, 30(5): 1637-1648.
    [7]
    Cole K D, Tarawneh C, Wilson B. Analysis of flux-base fins for estimation of heat transfer coefficient[J]. International Journal of Heat and Mass Transfer, 2009, 52(1/2): 92-99.
    [8]
    Malik M Y, Rafiq A. Two-dimensional fin with convective base condition[J]. Nonlinear  ̄Analysis: Real World Applications, 2010, 11(1): 147-154.
    [9]
    Lamberg P, Sirén K. Analytical model for melting in a semi-infinite PCM storage with an internal fin[J]. Heat and Mass Transfer, 2003, 39(2): 167-176.
    [10]
    Lamberg P. Approximate analytical model for two-phase solidification problem in a finned phase-change material storage[J]. Applied Energy, 2004, 77(2): 131-152.
    [11]
    Shatikian V, Ziskind G, Letan R. Numerical investigation of a PCM-based heat sink with internal fins[J]. International Journal of Heat and Mass Transfer, 2005, 48(7): 3689-3706.
    [12]
    Talati F, Mosaffa A H, Rosen M A. Analytical approximation for solidification processes in PCM storage with internal fins: imposed heat flux[J]. Heat and Mass Transfer, 2011, 47(4): 369-376.
    [13]
    Wilson D G, Solomon A D. A Stefan-type problem with void formation and its explicit solution[J]. IMA Journal of Applied Mathematics, 1986, 37(1): 67-76.
    [14]
    Alexiades V, Solomon A D. Mathematical Modelling of Melting and Freezing Processes[M]. Washington D C: Hemisphere Publishing Corporation, 1993.
    [15]
    ik M N. Heat Conduction[M]. 2nd ed. New York: Wiley, 1993.
    [16]
    Carslaw H, Jaeger J. Conduction of Heat in Solids[M]. 2nd ed. London: Oxford University Press, 1959.
    [17]
    Lamberg P, Sirén K. Approximate analytical model for solidification in a finite PCM storage with internal fins[J]. Applied Mathematical Modelling, 2003, 27(7): 491-513.
    [18]
    Incropera F P, DeWitt D P, Bergman T L, Lavine A S. Fundamental of Heat and Mass Transfer[M]. 6th ed. New York: Wiley, 2007.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1795) PDF downloads(1065) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return