YAO Wen-juan, YE Zhi-ming. Analytical Solution for Bending Beam Subject to Lateral Force With Different Modulus[J]. Applied Mathematics and Mechanics, 2004, 25(10): 1014-1022.
 Citation: YAO Wen-juan, YE Zhi-ming. Analytical Solution for Bending Beam Subject to Lateral Force With Different Modulus[J]. Applied Mathematics and Mechanics, 2004, 25(10): 1014-1022.

# Analytical Solution for Bending Beam Subject to Lateral Force With Different Modulus

• Rev Recd Date: 2004-05-31
• Publish Date: 2004-10-15
• A bending beam,subjected to two state of plane stress,was chosen to investigate.The determination of the neutral surface of the structure was made,and the calculating formulas of neutral axis,normal stress,shear stress and displacement were derived.It is concluded that,for the elastic bending beam with different tension-compression modulus in the condition of complex stress,the position of the neutral axis is not related with the shear stress,and the analytical solution can be derived by normal stress used as a criterion,improving the multiple cyclic method which determines the position of neutral point by the principal stress.Meanwhile,a comparison is made between the results of the analytical solution and those calculated from the classic mechanics theory,assuming the tension modulus is equal to the compression modulus,and those from the finite element method (FEM) numerical solution.The comparison shows that the analytical solution considers well the effects caused by the condition of different tension and compression modulus.Finally,a calculation correction of the structure with different modulus is proposed to optimize the structure.
•  [1] Medri G. A nonlinear elastic model for isotropic materials with different behavior in tension and compression[J].Transactions of the ASME,1982,26(104):26—28. [2] Амбарцумян С А.不同模量弹性理论[M].邬瑞锋，张允真 译.北京：中国铁道出版社，1986. [3] Srinivasan R S , Ramachandra L S.Large deflection analysis of bimodulus annular and circular plates using finite elements[J].Computers & Structures, 1989,31(5):681—691. [4] Srinivasan R S, Ramachandra L S. Axisymmetric buckling and post-bucking of bimodulus annular plates[J].Eng Struct,1989,11(7):195—198. [5] 张允真，王志锋，不同模量弹性力学问题的有限元法[J].计算结构力学及其应用，1989，6(1):236—246. [6] Papazoglou J L, Tsouvalis N G, Mechanical behaviour of bimodulus laminated plates[J].Composite Structures,1991,17(1):1—22. [7] 杨海天，邬瑞锋，杨克检，等.初应力法解拉压双弹性模量问题[J].大连理工大学学报，1992，32（1）:35—39. [8] TSENG Yi-ping,LEE Cheng-tao. Bending analysis of bimodular laminates using a higher-order finite strip method[J].Composite Structures,1995,30(4)：341—350. [9] YE Zhi-ming.A new finite element formulation for planar elastic deformation[J].Internat J for Numerical Methods in Engineering,1997,14(40):2579—2592. [10] TSENG Yi-ping,JIANG Yu-ching. Stress analysis of bimodular laminates using hybrid stress plate elements[J].International Journal of Solids Structures,1998,35(17):2025—2028. [11] YE Zhi-ming,YU Huang-ran,YAO Wen-juan.A finite element formulation for different Young's modulus when tension and compression loading[A].In:Jin Ho Kwak Ed.Com2Mac Conference on Computational Mathematics[C].South Korea: Pohang University of Science and Technology,2001,2—5. [12] Raffaele Zinno, Fabrizio Greco.Damage evolution in bimodular laminated composites[J].Composite Structures,2001,53(4):381—402. [13] Gao X -L,Li K,Mall S.A mechanics-of-materials model for predicting Young's modulus of damaged woven fabric composites involving three damage modes[J].International Journal of Solids and Structures,2003,40(4):981—999. [14] 姚文娟,叶志明.不同模量弯压柱的解析解[J].应用数学和力学，2004，[STHZ]. 25[STBZ]. (9):901—909.

### Catalog

###### 通讯作者: 陈斌, bchen63@163.com
• 1.

沈阳化工大学材料科学与工程学院 沈阳 110142