GU Yu. Elastic-Plastic Deformation of Sandwich Rod on the Elastic Basis[J]. Applied Mathematics and Mechanics, 2008, 29(3): 351-360.
Citation: GU Yu. Elastic-Plastic Deformation of Sandwich Rod on the Elastic Basis[J]. Applied Mathematics and Mechanics, 2008, 29(3): 351-360.

Elastic-Plastic Deformation of Sandwich Rod on the Elastic Basis

  • Received Date: 2007-08-17
  • Rev Recd Date: 2008-01-22
  • Publish Date: 2008-03-15
  • The problem about bending of the three-layer elastic-plastic rod located on the elastic base, with a compressibly physical nonlinear core, was studied. The mechanical response of the designed three-layer elements consisting of two bearing layers and a core was examined. The complicated problem about curving of the three-layer rod located on the elastic base was solved. Convergence of the proposed method of elastic solutions was examined to convince that the solution is acceptable. The calculated results indicate that the plasticity and physical nonlinearity of materials have a great influence on the deformation of the sandwich rod on the elastic basis.
  • loading
  • [1]
    Hohe J, Goswami S, Becker W. Assessment of interface stress concentrations in layered composites with application to sandwich panels[J].Computational Materials Science,2003,26:71-79. doi: 10.1016/S0927-0256(02)00394-4
    [2]
    Chamis C C, Aiello R A,Murthy P L N. Composite sandwich thermostructural behavior: computational simulation[A].In:Proceeding of the 27th Structure, Structural Dynamics, and Materials Conference[C].Texas USA:Part 1. San Antonio,TX,1986,370-381.
    [3]
    Chamis C C, Aiello R A,Murthy P L N. Fiber composite sandwich thermostructural behavior: computational simulation[J].J Compos Tech Res,1988,10(3):93-99. doi: 10.1520/CTR10135J
    [4]
    Elspass W, Flemming M.Analysis of precision sandwich structures under thermal loading[A].In:Proceeding of 17th Congress of the International Council Aeronautical Sciences[C].Sweden:Vol 2. Stockholm,Sweden,1990,1513-1518.
    [5]
    Burton W S, Noor A K.Three-dimensional solutions for thermomechanical stresses in sandwich panels and shells[J].J Eng Mech, ASCE,1994,120(10):2044-2071. doi: 10.1061/(ASCE)0733-9399(1994)120:10(2044)
    [6]
    Jeusette Jean-Pierre,Laschet Gottfried. Pre- and postbuckling finite element analysis of curved composite and sandwich panels[J].AIAA J,1990,28(7):1233-1239. doi: 10.2514/3.25199
    [7]
    Chai Gin-Boay, Seah Leong-Keey, Chuwa Lee-Soon. Stress distribution in sandwich beams under tension[J].Composite Structure,1999,45(3):195-204. doi: 10.1016/S0263-8223(99)00026-4
    [8]
    Petras A, Sutcliffe M P F.Indentation resistance of sandwich beams[J].Composite Structure,1999,46(4):413-424. doi: 10.1016/S0263-8223(99)00109-9
    [9]
    Petras A. Sutcliffe M P F. Indentation failure analysis of sandwich beams[J].Composite Structure,2000,50(3):311-318. doi: 10.1016/S0263-8223(00)00122-7
    [10]
    McCormack T M,Miller R, Kesler O,et al.Failure of sandwich beams with metallic foam cores[J].Internat J Solids Struct,2001,38(28/29):4901-4920. doi: 10.1016/S0020-7683(00)00327-9
    [11]
    Kassapoglou C, Fantle S C, Chou J C. Wrinkling of composite sandwich structures under compression[J].Journal of Composites Technology & Research,1995,17(4):308-316.
    [12]
    Maiti S K,Shanbhag M R,Eswaran K. Cracktip shielding in adhesive bounded sandwich panels[J].Internat J Fract,1992,58(4):63-68. doi: 10.1007/BF00048959
    [13]
    Cantwell W J, Davies P. A test technique for assessing core-skin adhesion in composite sandwich structure[J].J Mater Sci Lett,1994,13(3):203-205. doi: 10.1007/BF00278162
    [14]
    Scott Burton W,Noor A K. Structural analysis of the adhesive bond in a honeycomb core sandwich panel[J].Finite Elements Anal Design,1997,26(3):213-227. doi: 10.1016/S0168-874X(96)00081-9
    [15]
    Huang S-J.An analytical method for calculating the stress and strain in adhesive layers in sandwich beams[J].Composite Structures,2003,60(1):105-114. doi: 10.1016/S0263-8223(02)00288-X
    [16]
    冯仁杰, 于九明.蜂窝夹芯复合板及其在汽车工业中的应用[J].汽车工艺与材料,2003,(8):30-32.
    [17]
    张广平,戴干策.复合材料蜂窝夹芯板及其应用[J].纤维复合材料,2000,(2):25-27.
    [18]
    杨杰,沈惠申.复合材料层合夹芯板局部变形行为研究[J].工程力学,2002,19(1):135-138.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (2707) PDF downloads(557) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return