CHENG Xiao-quan, LI Zheng-neng. Damage Progressive Model of Compression of Composite Laminates After Low Velocity Impact[J]. Applied Mathematics and Mechanics, 2005, 26(5): 569-576.
 Citation: CHENG Xiao-quan, LI Zheng-neng. Damage Progressive Model of Compression of Composite Laminates After Low Velocity Impact[J]. Applied Mathematics and Mechanics, 2005, 26(5): 569-576.

# Damage Progressive Model of Compression of Composite Laminates After Low Velocity Impact

• Rev Recd Date: 2005-01-18
• Publish Date: 2005-05-15
• Compressive properties of composite laminates after low velocity impact are one of the most serious circumstances that must be taken into account in damage tolerance design of composite structures. In order to investigate compressive properties of composite laminates after low velocity impact, three dimensional dynamic finite element method (FEM) was used to simulate low-velocity impact damage of 2 kinds of composite laminates firstly. Damage distributions and projective damage areas of the laminates were predicted under two impact energy levels. The analyzed damage after im pact was considered to be the initial damage of the laminates under compressive loads. Then three di mensional static FEM was used to simulate the compressive failure process and to calculate residual compressive strengths of the impact damaged laminates. It is achieved to simulate the whole process from initial low-velocity impact damage to final compressive failure of composite laminates. Compared with experimental results, it shows that the numerical predicting results agree with the test results fairly well.
•  [1] 程小全.复合材料层合板与蜂窝夹芯板低速冲击后压缩性能研究 [D]. 博士学位论文.北京: 北京航空航天大学,1998,1—63. [2] Cantwell W J,Morton J.The impact resistance of composite materials—a review[J].Composites,1991,22(5):347—362. [3] 程小全, 吴学仁.复合材料层合板低速冲击损伤容限的改进方法和影响因素[J].高分子材料科学与工程, 2002,18(3):20—25. [4] 程小全, 张子龙, 吴学仁.小试样层合板低速冲击后的剩余压缩强度[J].复合材料学报,2002,19(6):8—12. [5] Yang S H,Sun C T.Indentation law for composite laminates:composite materials.testing and design[R]. ASTM STP 787, 1982，425—449. [6] Hashin Z. Failure criteria for unidirectional fiber composites[J].Journal of Applied Mechanics,1980,47:329—334. [7] 关志东. 复合材料层板及加筋板低速冲击损伤过程的有限元模拟分析[D].博士学位论文.北京: 北京航空航天大学, 1994,58—70. [8] Choi H Y,Chang F K.A model for predicting damage in graphite/epoxy laminated composites resulting from low velocity point impact[J].Journal of Composite Materials,1992,26(14):2134—2169. [9] Reddy Y S,Reddy J N.Three-dimensional finite element progressive failure analysis of composite laminates under axial extension[J].Journal of Composite Technology & Research,1993,15(2):73—87. [10] 程小全. 复合材料低速冲击后压缩行为研究[R]. 博士后研究工作报告.北京:北京航空材料研究院,2000,39—52. [11] Chang F K,Springer G S.The strength of fiber reinforced composite bends[J].Journal of Composite Materials,1986,20:30—45. [12] Chang F K,Lessard L B.Damage tolerance of laminated composites containing an open hole and subjected to compressive loadings: Part Ⅰ—Analysis[J].Journal of Composite Materials,1991,25(1):2—43.

### Catalog

###### 通讯作者: 陈斌, bchen63@163.com
• 1.

沈阳化工大学材料科学与工程学院 沈阳 110142