纳米颗粒增强金属基复合材料温度相关性屈服强度理论表征模型

王翊霖; 李卫国; 麻建坐

doi:10.21656/1000-0887.460044

纳米颗粒增强金属基复合材料温度相关性屈服强度理论表征模型

doi: 10.21656/1000-0887.460044

1. 重庆大学航空航天学院，重庆 400044;
2. 重庆大学煤矿灾害动力学与控制国家重点实验室，重庆 400044;
3. 重庆工业职业技术学院机械工程学院，重庆 401120

基金项目:

中央高校基本科研业务费(2024IAISZD008)；国家自然科学基金(面上项目)(12272073)

详细信息

作者简介:
王翊霖（1999—），男，硕士(E-mail: yilin08021999@163.com)；李卫国（1976—），男，教授，博士，博士生导师(通信作者. E-mail: wgli@cqu.edu.cn).

通讯作者:
李卫国（1976—），男，教授，博士，博士生导师(通信作者. E-mail: wgli@cqu.edu.cn).

中图分类号: O341
计量
- 文章访问数: 12
- HTML全文浏览量: 3
- PDF下载量: 1
- 被引次数: 0
出版历程
- 收稿日期: 2025-03-06
- 修回日期: 2025-03-13
- 网络出版日期: 2026-01-21
- 刊出日期: 2026-01-01

A Theoretical Characterization Model for Temperature-Dependent Yield Strengths of Metal Matrix Composites Reinforced With Nanoparticles

WANG Yilin¹,
LI Weiguo^{1,2
, ,},
MA Jianzuo³

1. College of Aerospace Engineering, Chongqing University, Chongqing 400044, P.R.China;
2. State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing 400044, P.R.China;
3. College of Mechanical Engineering and Automation, Chongqing Industry Polytechnic College, Chongqing 401120, P.R.China

Funds:

The National Science Foundation of China(12272073)

摘要

摘要: 通过定量表征宽温域下，各强化机制对纳米颗粒增强金属基复合材料(nanoparticle reinforced metal matrix composites， NRMMCs)的屈服强度以及晶界滑移对金属基体屈服强度的影响，建立了不含拟合参数的NRMMCs温度相关性屈服强度理论表征模型.模型仅需金属基体任意一个参考温度下的屈服强度及相关材料参数，如比热容、热膨胀系数、熔点等，即可预测NRMMCs在任意温度下的屈服强度.模型预测结果与目前获取到的四组所有实验数据均取得了良好的一致性，实现了对NRMMCs宽温域屈服强度的合理预测.在此基础上，探讨了主要强化机制对NRMMCs屈服强度的影响及其随温度和颗粒尺寸的演化规律，为设计和开发适用于宽温域下的NRMMCs提供了理论依据和有效建议.
- 纳米颗粒增强金属基复合材料 /
- 温度相关性 /
- 屈服强度 /
- 理论表征模型 /
- 强化机制
Abstract: Through quantitative characterization of the effects of various strengthening mechanisms on the yield strengths of nanoparticlereinforced metal matrix composites (NRMMCs) within a wide temperature range, as well as the impacts of grain boundary sliding on the yield strength of the metal matrix, a theoretical characterization model for the temperaturedependent yield strengths of NRMMCs without fitting parameters was established. This model only requires the yield strength of the metal matrix at any one reference temperature and relevant material parameters such as the specific heat capacity, the thermal expansion coefficient, and the melting point, etc., to predict the yield strengths of the NRMMCs at any temperature. The predicted results of the model are in good agreement with all the 4 sets of experimental data currently available, achieving a reasonable prediction of the yield strengths of the NRMMCs within a wide temperature range. On this basis, the effects of the main strengthening mechanisms on the yield strengths of the NRMMCs and their evolution laws with the temperature and the particle size were discussed, to provide a theoretical basis and effective suggestions for the design and development of NRMMCs applicable to a wide temperature range.
- nanoparticle reinforced metal matrix composite /
- temperature dependence /
- yield strength /
- theoretical characterization model /
- reinforcement mechanism

HTML全文

参考文献(37)

[2]TJONG S C. Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets[J].Materials Science and EngineeringR:Reports,2013,74(10): 281-350.

JIAO Y, HUANG L, GENG L. Progress on discontinuously reinforced titanium matrix composites[J].Journal of Alloys and Compounds,2018,767: 1196-1215.

[3]RAVIRAJ S, ADITHYA H, KUMAR S S U, et al. Processing and mechanical characterisation of titanium metal matrix composites: a literature review[J].Journal of Composites Science,2022,6(12): 388.

[4]RAMESH C S, ADARSHA H, PRAMOD S, et al. Tribological characteristics of innovative Al6061-carbon fiber rod metal matrix composites[J].Materials & Design,2013,50: 597-605.

[5]HASSAN S F, TAN M J, GUPTA M. High-temperature tensile properties of Mg/Al₂O₃ nanocomposite[J].Materials Science and EngineeringA,2008,486(1/2): 56-62.

[6]OORO J, SALVADOR M, CAMBRONERO L. High-temperature mechanical properties of aluminium alloys reinforced with boron carbide particles[J].Materials Science & Engineering A,2008,499(1): 421-426.

[7]CASATI R, FIOCCHI J, FABRIZI A, et al. Effect of ball milling on the ageing response of Al2618 composites reinforced with SiC and oxide nanoparticles[J].Journal of Alloys and Compounds,2017,693: 909-920.

[8]YU H, ZHOU H, SUN Y, et al. Microstructures and mechanical properties of ultrafine-grained Ti/AZ31 magnesium matrix composite prepared by powder metallurgy[J]. Advanced Powder Technology,2018,29(12): 3241-3249.

[9]〖JP2〗ZHANG Z, CHEN D. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength[J].Scripta Materialia,2006,54(7): 1321-1326.

[10]HASSANZADEH-AGHDAM M K, MAHMOODI M J, ANSARI R. A comprehensive predicting model for thermomechanical properties of particulate metal matrix nanocomposites[J].Journal of Alloys and Compounds,2018,739: 164-177.

[11]CLYNE T W, WITHERS P J.An Introduction to Metal Matrix Composites[M]. Cambridge: Cambridge University Press, 1993.

[12]GOH C, WEI J, LEE L, et al. Properties and deformation behaviour of Mg-Y₂O₃ nanocomposites[J].Acta Materialia,2007,55(15): 5115-5121.

[13]DAI L, LING Z, BAI Y L. Size-dependent inelastic behavior of particle-reinforced metal-matrix composites[J].Composites Science and Technology,2001,61(8): 1057-1063.

[14]SANATY-ZADEH A. Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall-Petch effect[J].Materials Science & Engineering A,2011,531: 112-118.

[15]MALAKI M, XU W, KASAR A, et al. Advanced metal matrix nanocomposites[J].Metals,2019,9(3): 330.

[16]ZHANG X, LI W, MA J, et al. A novel temperature dependent yield strength model for metals considering precipitation strengthening and strain rate[J].Computational Materials Science,2017,129: 147-155.

[17]PAN D, MA Y L, ZHANG X Y, et al. Theoretical prediction method of Young’s modulus and yield strength of micron particle reinforced metal matrix composites at different temperatures[J].Composite Structures,2023,316: 117051.

[18]ZHANG X, LI W, MA J, et al. Modeling the effects of grain boundary sliding and temperature on the yield strength of high strength steel[J].Journal of Alloys and Compounds,2021,851: 156747.

[19]LIU H, WANG A, WANG L, et al. The syntheses of SiCp/Al nanocomposites under high pressure[J].Journal of Materials Research,1997,12(5): 1187-1190.

[20]ZHANG Z, CHEN D L. Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites[J].Materials Science and EngineeringA,2008,483: 148-152.

[21]RAMAKRISHNAN N. An analytical study on strengthening of particulate reinforced metal matrix composites[J].Acta Materialia,1996,44(1): 69-77.

[22]KIM C S, SOHN I, NEZAFATI M, et al. Prediction models for the yield strength of particle-reinforced unimodal pure magnesium (Mg) metal matrix nanocomposites (MMNCs)[J].Journal of Materials Science,2013,48(12): 4191-4204.

[23]FU E G, LI N, MISRA A, et al. Mechanical properties of sputtered Cu/V and Al/Nb multilayer films[J].Materials Science and EngineeringA,2008,493(1/2): 283-287.

[24]TAYEH T, DOUIN J, JOUANNIGOT S, et al. Hardness and Young’s modulus behavior of Al composites reinforced by nanometric TiB2 elaborated by mechanosynthesis[J].Materials Science and EngineeringA,2014,591: 1-8.

[25]RAJ R, THAKUR D G. Effect of particle size and volume fraction on the strengthening mechanisms of boron carbide reinforced aluminum metal matrix composites[J].Proceedings of the Institution of Mechanical Engineers (Part C):Journal of Mechanical Engineering Science,2019,233(4): 1345-1356.

[26]ASHBY M F. The deformation of plastically non-homogeneous materials[J].The Philosophical Magazine:A Journal of Theoretical Experimental and Applied Physics,1970,21(170): 399-424.

[27]LIN T C, CAO C, SOKOLUK M, et al. Aluminum with dispersed nanoparticles by laser additive manufacturing[J].Nature Communications,2019,10: 4124.

[28]叶大伦, 胡建华. 实用无机物热力学数据手册[M]. 2版. 北京: 冶金工业出版社, 2002. (YE Dalun, HU Jianhua.Practical Manual of Inorganic Thermodynamic Data[M]. 2nd ed. Beijing: Metallurgical Industry Press, 2002. (in Chinese))

[29]SRIDHARAN N, GUSSEV M N, PARISH C M, et al. Evaluation of microstructure stability at the interfaces of Al-6061 welds fabricated using ultrasonic additive manufacturing[J].Materials Characterization,2018,139: 249-258.

[30]SOLTANI M, ATRIAN A. High temperature tensile behavior and microstructure of Al-SiC nanocomposite fabricated by mechanical milling and hot extrusion technique[J].Materials Research Express,2018,5(2): 025026.

[31]MA S, DAI J, ZHANG C, et al. Enhanced high temperature mechanical properties and heat resistance of an Al-Cu-Mg-Fe-Ni matrix composite reinforced with in situ TiB2 particles[J].Journal of Materials Science,2023,58(32): 13019-13039.

[32]ZHANG L J, QIU F, WANG J G, et al. High strength and good ductility at elevated temperature of nano-SiCp/Al2014 composites fabricated by semi-solid stir casting combined with hot extrusion[J].Materials Science and EngineeringA,2015,626: 338-341.

[33]PARK J G, KEUM D H, LEE Y H. Strengthening mechanisms in carbon nanotube-reinforced aluminum composites[J].Carbon,2015,95: 690-698.

[34]LLOYD D J. Particle reinforced aluminium and magnesium matrix composites[J].International Materials Reviews,1994,39(1): 1-23.

[35]BHARATH V, AJAWAN S S, NAGARAL M, et al. Characterization and mechanical properties of 2014 aluminum alloy reinforced with Al₂O₃ p composite produced by two-stage stir casting route[J].Journal of the Institution of Engineers (India):Series C,2019,100(2): 277-282.

[36]HUANG Y, SUN X, CHANG Y, et al. High thermal stability and mechanical properties of nanosized-Fe-reinforced aluminum matrix composites via deformation-driven metallurgy[J].Materials Science and EngineeringA,2024,913: 147092.

[37]SURAPPA M K. Aluminium matrix composites: challenges and opportunities[J].Sadhana,2003,28(1): 319-334.

施引文献

资源附件(0)

访问统计

计量

文章访问数: 12
HTML全文浏览量: 3
PDF下载量: 1
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

纳米颗粒增强金属基复合材料温度相关性屈服强度理论表征模型

doi: 10.21656/1000-0887.460044

作者简介:
王翊霖（1999—），男，硕士(E-mail: yilin08021999@163.com)；李卫国（1976—），男，教授，博士，博士生导师(通信作者. E-mail: wgli@cqu.edu.cn).

通讯作者:
李卫国（1976—），男，教授，博士，博士生导师(通信作者. E-mail: wgli@cqu.edu.cn).

计量

A Theoretical Characterization Model for Temperature-Dependent Yield Strengths of Metal Matrix Composites Reinforced With Nanoparticles

计量

目录

留言板

纳米颗粒增强金属基复合材料温度相关性屈服强度理论表征模型

doi: 10.21656/1000-0887.460044

作者简介: 王翊霖（1999—），男，硕士(E-mail: yilin08021999@163.com)；李卫国（1976—），男，教授，博士，博士生导师(通信作者. E-mail: wgli@cqu.edu.cn).

通讯作者: 李卫国（1976—），男，教授，博士，博士生导师(通信作者. E-mail: wgli@cqu.edu.cn).

计量

出版历程

A Theoretical Characterization Model for Temperature-Dependent Yield Strengths of Metal Matrix Composites Reinforced With Nanoparticles

计量

出版历程

目录

作者简介:
王翊霖（1999—），男，硕士(E-mail: yilin08021999@163.com)；李卫国（1976—），男，教授，博士，博士生导师(通信作者. E-mail: wgli@cqu.edu.cn).

通讯作者:
李卫国（1976—），男，教授，博士，博士生导师(通信作者. E-mail: wgli@cqu.edu.cn).