General Solution of the Overall Bending of Flexible Circular Ring Shells With Moderately Slender Ratio and Applications to the Bellows(Ⅱ)-Calculation for Omega-Shaped Bellows
-
摘要: (Ⅱ)是(Ⅰ)的具体应用。计算了Ω型波纹管的角向刚度、横向刚度和应力分布,并将所得结果与有关的细环壳理论及实验进行了比较。结果表明,单独用(Ⅰ)的非齐次解能够计算Ω型波纹管的纯弯曲,而且比细环壳理论更接近实际;但在横向位移作用下,(Ⅰ)的非齐次解只能部分地满足边界条件,此时应同时考虑齐次解的作用,即完整的一般解(Ⅰ)才能满足所有的要求.Abstract: (Ⅱ) is one of the applications of (Ⅰ),in which the angular stiffness,the lateral stiffness and the corresponding stress distributions of Omega-shaped bellows were calculated,and the present results were compared with those of the other theories and experiments.It is shown that the non-homogenous solution of (Ⅰ) can solve the pure bending problem of the bellows by itself,and be more effective than by the theory of slender ring shells;but if a lateral slide of the bellows support exists the non-homogenous solution will no longer entirely satisfy the boundary conditions of the problem,in this case the homogenous solution of (Ⅰ)should be included,that is to say,the full solution of (Ⅰ) can meet all the requirements.
-
Key words:
- theory of flexible shell /
- circular ring shell /
- Omega-shaped bellows /
- general solution /
-
[1] 钱伟长. 波纹管的制造、设计、实验和理论[A]. 见:钱伟长. 应用数学和力学论文集[C]. 南京:江苏科技出版社,1979,110-126. [2] Standards of the Expansion Joint Manufacturers Association (EJMA)[S]. EJMA, INC, Seventh Edition, New York,1998. [3] Dahl N C. Toroidal-shell expansion joints[J]. Journal of Applied Mechanics, ASME,1953,20(4):497-503. [4] 钱伟长. 细环壳极限方程的非齐次解及其在仪器仪表上的应用[J]. 仪器仪表学报,1980,1(1):89-112. [5] ZHU Wei-ping, GUO Ping. Application of non-homogeneous solution for equations of slender ring shells to overall-bending problem of Ω-shaped bellows[J]. Journal of Shanghai University,1999,3(2):121-126. [6] 钱伟长,郑思梁. 轴对称圆环壳的复变量方程和轴对称细环壳的一般解[J]. 清华大学学报,1979,19(1):27-47. [7] 钱伟长,郑思梁. 轴对称圆环壳的一般解[J]. 应用数学和力学,1980,1(3):287-299. [8] 朱卫平,黄黔,郭平. 柔性圆环壳在子午面内整体弯曲的复变量方程及细环壳的一般解[J]. 应用数学和力学,1999,20(9):889-895. -
点击查看大图
计量
- 文章访问数: 2334
- HTML全文浏览量: 104
- PDF下载量: 455
- 被引次数: 0
下载:
